曲轴轴颈端面磨削烧伤问题的新解决方案

详细信息    查看全文 | 推荐本文 |

英文篇名：Structure optimization of electroplating CBN grinding wheel 作者：刘将先 ; 瞿晓波 ; 张晓盼 英文作者：LIU Jiangxian;QU Xiaobo;ZHANG Xiaopan;Dongfeng Peugeot Citroen Automobile Company Ltd.;Zhengzhou Research Institute for Abrasives & Grinding Co., Ltd.; 关键词：电镀CBN砂轮 ; 工艺分析 ; 结构优化 ; 磨削烧伤 英文关键词：electroplating CBN grinding wheel;;process analysis;;optimal structure;;grinding burn 中文刊名：JGSM 英文刊名：Diamond & Abrasives Engineering 机构：神龙汽车有限公司;郑州磨料磨具磨削研究所有限公司; 出版日期：2019-04-20 出版单位：金刚石与磨料磨具工程 年：2019 期：v.39;No.230 语种：中文; 页：JGSM201902012 页数：3 CN：02 ISSN：41-1243/TG 分类号：65-67

摘要

为解决磨削曲轴轴颈端面时出现磨削烧伤的问题,在调整冷却系统无果的情况下,重新设计砂轮结构。通过调整砂轮端面和磨料类型,设计并制备新型电镀CBN砂轮,并以其进行磨削加工实验。结果表明:在冷却系统不变的情况下,新型电镀CBN砂轮可以解决此加工过程中的磨削烧伤问题。
        End face burn occurred when grinding CBN grinding wheel in grinding crankshaft journal and end face. In condition that adjusting the cooling system does not solve this problem, the structure of grinding wheel is redesigned by modifying the end surface and grain type. The newly designed and prepared electroplated CBN grinding wheel is tested on grinding experiment. Results show that at the same cooling system, the new electroplated CBN grinding wheel could solve the problem of burns in the mentioned process.

引文

[1] 袁哲俊,刘华明.刀具设计手册 [M].北京:机械工业出版社,1999.YUAN Zhejun,LIU Huaming.Tool design manual [M].Beijing:China Machine Press,1999.
    [2] 王先逵.磨削加工 [M].北京:机械工业出版社,2008.WANG Xiankui.Grinding process [M].Beijing:China Machine Press,2008.
    [3] 袁哲俊.金属切削刀具 [M].上海:上海科学技术出版社,1992.YUAN Zhejun.Metal cutting tool [M].Shanghai:Shanghai Scientific & Technological Publishers,1992.