智能变电站二次系统公共信息模型拓展研究
|
摘要
智能变电站的发展对一二次系统信息进一步融合提出了更高的要求。IEC 61970标准模型和IEC 61850标准模型分别描述一次系统和二次系统信息,二者在建模方法、应用方式上的差异,导致二者在映射和集成应用上存在困难。针对当前智能变电站应用需求,本文在IEC 61970系列标准中的公共信息模型(Common Information Model,CIM)基础上,建立智能变电站二次系统设备模型、拓扑模型和信息关联模型,有效实现了二次系统物理拓扑建模和一二次设备信息关联,进一步促进了一二次系统信息融合,为一二次数据信息挖掘、设备协同故障诊断等技术研究奠定基础。
The development of Intelligent Substation puts forward higher requirements for further integration of the primary secondary system information. The IEC 61970 standard model and the IEC 61850 standard model respectively describe the primary secondary system information, the difference of their modeling methods and application methods leads to difficulties in application of mapping and integrating. In view of the current application requirements of Intelligent Substation, this article establishes equipment model, topology model and information association model of the secondary system in Intelligent Substation based on the common information model in the IEC 61970 series standard, which effectively relates physical topology modeling and primary secondary equipment information. The relation promotes the integration of the primary secondary system information, and furthermore offers foundation for the research of primary secondary data mining, collaborative fault diagnosis or other techniques.
The development of Intelligent Substation puts forward higher requirements for further integration of the primary secondary system information. The IEC 61970 standard model and the IEC 61850 standard model respectively describe the primary secondary system information, the difference of their modeling methods and application methods leads to difficulties in application of mapping and integrating. In view of the current application requirements of Intelligent Substation, this article establishes equipment model, topology model and information association model of the secondary system in Intelligent Substation based on the common information model in the IEC 61970 series standard, which effectively relates physical topology modeling and primary secondary equipment information. The relation promotes the integration of the primary secondary system information, and furthermore offers foundation for the research of primary secondary data mining, collaborative fault diagnosis or other techniques.
引文
[1]刘亚丽,周昀,王少荣.配电网继电保护一二次联合数字仿真系统研究[J].电力系统保护与控制,2017,45(13):124-129.
[2]吴国沛.电力网一、二次系统可靠性分析与应用[D].广州:华南理工大学,2012.
[3]黄良,高正浩,曹洪,邓琨,刘典安,王星华.一二次系统融合的电网风险评估实用化计算方法及数据建模研究[J].电力系统保护与控制,2016,44(17):104-110.
[4]金波,肖先勇,李长松.基于一、二次系统交互关系的电网连锁故障演化机制分析[J].电力自动化设备,2017,37(1):169-175.
[5]朱子坤,王星华,胡铁斌,张程.一二次系统融合的电网风险评估数据建模及系统设计研究[J].自动化与仪器仪表,2016,(4):201-203.
[6]苗斌,童晓阳,郑永康,甄威,刘明忠.基于IEC61850的智能变电站图形化系统配置器原型设计[J].电力系统自动化,2013,37(7):82-87.
[7]柳明,何光宇.IEC 61850/IEC 61970保护模型的协调[J].电力系统自动化,2006,(22):7-11.
[8]胡靓,王倩.基于IEC 61850与61970的无缝通信体系的研究[J].电力系统通信,2007,(12):15-20.
[9]周伊琳,孙建伟,黄缙华,孙绪江,杨锋,林国春,顾博川,江伟奇,张计芬.基于IEC 61970标准的电力系统保护模型扩展方案研究与应用[J].电力系统保护与控制,2013,41(14):120-125.
[10]熊华强,万勇,桂小智,杜科,叶飞.智能变电站SCD文件可视化管理和分析决策系统的设计与实现[J].电力自动化设备,2015,35(5):166-171.
[11]孙金莉,李煜磊,冯凝,张园园.智能变电站二次设备缺陷分析专家系统的研究与应用[J].电网与清洁能源,2016,32(10):94-98.
[12]席禹,邹俊雄,蔡泽祥,苏忠阳.基于报文识别与流量管控的智能变电站保护控制信息安全防护方法[J].电网技术,2017,41(2):624-629.
[13]陆一鸣,刘东,黄玉辉,于文鹏,顾建炜.基于CIM的馈线建模和应用[J].中国电机工程学报,2012,32(28):157-163,5.
[2]吴国沛.电力网一、二次系统可靠性分析与应用[D].广州:华南理工大学,2012.
[3]黄良,高正浩,曹洪,邓琨,刘典安,王星华.一二次系统融合的电网风险评估实用化计算方法及数据建模研究[J].电力系统保护与控制,2016,44(17):104-110.
[4]金波,肖先勇,李长松.基于一、二次系统交互关系的电网连锁故障演化机制分析[J].电力自动化设备,2017,37(1):169-175.
[5]朱子坤,王星华,胡铁斌,张程.一二次系统融合的电网风险评估数据建模及系统设计研究[J].自动化与仪器仪表,2016,(4):201-203.
[6]苗斌,童晓阳,郑永康,甄威,刘明忠.基于IEC61850的智能变电站图形化系统配置器原型设计[J].电力系统自动化,2013,37(7):82-87.
[7]柳明,何光宇.IEC 61850/IEC 61970保护模型的协调[J].电力系统自动化,2006,(22):7-11.
[8]胡靓,王倩.基于IEC 61850与61970的无缝通信体系的研究[J].电力系统通信,2007,(12):15-20.
[9]周伊琳,孙建伟,黄缙华,孙绪江,杨锋,林国春,顾博川,江伟奇,张计芬.基于IEC 61970标准的电力系统保护模型扩展方案研究与应用[J].电力系统保护与控制,2013,41(14):120-125.
[10]熊华强,万勇,桂小智,杜科,叶飞.智能变电站SCD文件可视化管理和分析决策系统的设计与实现[J].电力自动化设备,2015,35(5):166-171.
[11]孙金莉,李煜磊,冯凝,张园园.智能变电站二次设备缺陷分析专家系统的研究与应用[J].电网与清洁能源,2016,32(10):94-98.
[12]席禹,邹俊雄,蔡泽祥,苏忠阳.基于报文识别与流量管控的智能变电站保护控制信息安全防护方法[J].电网技术,2017,41(2):624-629.
[13]陆一鸣,刘东,黄玉辉,于文鹏,顾建炜.基于CIM的馈线建模和应用[J].中国电机工程学报,2012,32(28):157-163,5.