基于切片软件新功能优化FDM成型的研究
|
摘要
随着熔融层积成型技术(FDM)近年来受到越来越多的关注,其成型工艺成为了制约其制件应用的重要因素之一。制件成型受诸多因素综合影响,且缺乏明确的量化评价标准。聚焦切片软件的新功能,重点针对挤出、支撑、层厚和填充等常见成型问题,分析了通过几项软件新功能对上述问题实现良好优化的可能性。经理论分析和实验验证,上述软件的新功能能有效提高制件的成型效果。
With the increasing concern of FDM in recent years,the molding process has become one of the important factors that restrict the application of its parts. Forming of FDM products is influenced by many factors and lacks clear quantitative evaluation criteria. This paper focuses on the new functions of the slicing software, focusing on common molding problems such as extrusion, support, layer thickness and filling,and the possibility of achieving good optimization of the above problems through several new software functions is analyzed. Through theoretical analysis and experimental verification,the new functions of the above software can effectively improve the molding effect of the parts.
With the increasing concern of FDM in recent years,the molding process has become one of the important factors that restrict the application of its parts. Forming of FDM products is influenced by many factors and lacks clear quantitative evaluation criteria. This paper focuses on the new functions of the slicing software, focusing on common molding problems such as extrusion, support, layer thickness and filling,and the possibility of achieving good optimization of the above problems through several new software functions is analyzed. Through theoretical analysis and experimental verification,the new functions of the above software can effectively improve the molding effect of the parts.
引文
[1]刘伟军.快速成型技术及其应用[M].北京:机械工业出版社,2006.
[2]祝洲杰,沈建云,金济民. FDM制件的收缩现象分析及控制措施研究[J].制造技术与机床, 2016(12):29-32.
[3]祝洲杰,沈建云,金济民. FDM出丝过程对制件尺寸的影响及优化措施研究[J].机床与液压,2017(8):137-140.
[4]祝洲杰,金济民,蒋立正,等. FDM出丝过程对制件表面质量的影响及优化研究[J].制造技术与机床,2017(12):80-83.
[5]张乾,袁信翊,金鑫,等.打印铺层结构及工艺参数对FDM构件力学性能的影响[J].塑料工业,2017,45(7):69-72.
[6]姜化凯,于文强.基于FDM成型工艺的适应性分层方法研究[J].制造技术与机床,2016(10):38-43.
[7]巢海远,刘景,童晶,等.一种提高FDM三维打印系统成型效率的算法[J].微处理机,2014(12):38-42.
[2]祝洲杰,沈建云,金济民. FDM制件的收缩现象分析及控制措施研究[J].制造技术与机床, 2016(12):29-32.
[3]祝洲杰,沈建云,金济民. FDM出丝过程对制件尺寸的影响及优化措施研究[J].机床与液压,2017(8):137-140.
[4]祝洲杰,金济民,蒋立正,等. FDM出丝过程对制件表面质量的影响及优化研究[J].制造技术与机床,2017(12):80-83.
[5]张乾,袁信翊,金鑫,等.打印铺层结构及工艺参数对FDM构件力学性能的影响[J].塑料工业,2017,45(7):69-72.
[6]姜化凯,于文强.基于FDM成型工艺的适应性分层方法研究[J].制造技术与机床,2016(10):38-43.
[7]巢海远,刘景,童晶,等.一种提高FDM三维打印系统成型效率的算法[J].微处理机,2014(12):38-42.