摘要
当前国内外精密/超精密加工技术的快速发展,使得零部件加工精度和一致性得到显著提高,装配环节对产品性能的保障作用正日益凸显,相关研究越来越得到国内外学者的关注。针对目前我国产品装配技术研究相对滞后,缺乏相关研究体系的现状,在总结国内外产品装配技术的研究现状基础上,阐述了其分类和内涵,建立了产品装配技术的研究体系框架,并对其面向装配的设计、装配工艺设计与仿真、装配工艺装备、装配测量与检测、装配车间管理等主要研究方向进行了论述,最后指出了未来产品装配技术的集成化、精密化、微/纳化和智能化的发展趋势。
With the rapid development of precision and ultra-precision machining technology at home and abroad, precision and consistency of machined parts have been improved prominently. Hence, the assembly process is playing a more and more important role in assuring the performance of assembled products, and the related research is gaining widespread attention. However, domestic research on the products assembly technology is relatively lagging and lacks a comprehensive research system. Based on the state-of-the-art of the products assembly technology, its classification and connotation is elaborated, and a comprehensive research framework of the products assembly technology is established. Based thereon, the basic research contents of the framework are discussed, including design for assembly, assembly process design and simulation, assembly process equipment, assembly measurement, assembly workshop management, etc. Finally, the developing trends of the products assembly technology, i.e., integration, precision, micro-nano, intelligence, are pointed out.
引文
[1]张铁,李旻.互换性与测量技术[M].北京:清华大学出版社,2010.ZHANG Tie,LI Min.Interchangeability and measuring technology[M].Beijing:Tsinghua University Press,2010.
[2]孙刚,万毕乐,刘检华,等.基于三维模型的卫星装配工艺设计与应用技术[J].计算机集成制造系统,2011,17(11):2343-2350.SUN Gang,WAN Bile,LIU Jianhua,et al.Secondary planet assembly process design and applied technology based on 3D model[J].Computer Integrated Manufacturing Systems,2011,17(11):2343-2350.
[3]WHITNEY D E.Mechanical assemblies:Their design,manufacture,and role in product development[M].New York:Oxford University Press,2004.
[4]国家自然科学基金委员会工程与材料科学部.学科发展战略研究报告(2011-2020):机械工程学科发展战略报告[M].北京:科学出版社,2010.Ministry of engineering and materials science of the National Natural Science Foundation of China.Research report on the strategy of discipline development(2011-2020):Strategic report on the development of mechanical engineering discipline[M].Beijing:Science Press,2010.
[5]BOOTHROYD G,ALTING L.Design for assembly and disassembly[C].Annals of the CIRP,1992,41(2):652-636.
[6]姜华,熊光楞,曾庆良.面向装配的设计方法与技术研究[J].计算机集成制造系统,1998,5(4):56-60.JIANG Hua,XIONG Guangleng,ZENG Qingliang.Research on design method and technology for assembly[J].Computer Integrated Manufacturing Systems,1998,5(4):56-60.
[7]顾寄南,蔡健敏.产品可装配性评价技术的研究现状和发展方向[J].机械设计,2003,20(12):1-3.GU Jinan,CAI Jianmin.Research status and development direction of product assemblability evaluation technology[J].Journal of Machine Design,2003,20(12):1-3.
[8]BOOTHROYD G.Product design for manufacture and assembly[J].Computer-Aided Design,1994,26(7):515-602.
[9]DEFAZIO T L,WHITNEY D E.Simplified generation of all mechanical assembly sequences[J].IEEE Trans.Robotics and Automation,1987,3(6):640-658.
[10]SAEID M,ISLAM A U.Multi-criteria assembly sequencing[J].Computers and Industrial Engineering,1997,32(4):743-751.
[11]彭商贤,郭东.柔性装配系统设计的研究[J].中国机械工程,1996,7(3):34-38.PENG Shangxian,GUO Dong.Research on the design of flexible assembly system[J].China Mechanical Engineering,1996,7(3):34-38.
[12]刘检华,宁汝新,万毕乐,等.面向虚拟装配的复杂产品装配路径规划技术研究[J].系统仿真学报,2007,19(9):2003-2007.LIU Jianhua,NING Ruxin,WAN Bile,et al.Research of complex product assembly path planning in virtual assembly[J].Journal of System Simulation,2007,19(9):2003-2007.
[13]刘检华,侯伟伟,张志贤,等.基于精度和物性的虚拟装配技术[J].计算机集成制造系统,2011,17(3):595-604.LIU Jianhua,HOU Weiwei,ZHANG Zhixian,et al.Virtual assembly technology based on precision and physical attribute[J].Computer Integrated Manufacturing Systems,2011,17(3):595-604.
[14]SANKAR J,CONNACHER H I,LYONS K W.Virtual assembly using virtual reality techniques[J].Computer-Aided Design,1997,29(8):575-584.
[15]曾理,张林鍹,肖田元.一个虚拟装配支持系统的实现[J].系统仿真学报,2002,14(9):1149-1153.ZENG Li,ZHANG Linxuan,XIAO Tianyuan.Introduction of a virtual assembly supported system[J].Journal of System Simulation,2002,14(9):1149-1153.
[16]刘振宇,谭建荣,张树有.基于语义识别的虚拟装配运动引导技术研究[J].软件学报,2002,13(3):382~389.LIU Zhenyu,TAN Jianrong,ZHANG Shuyou.Research of motion guidance in virtual assembly based on semantics recognition[J].Journal of Software,2002,13(3):382-389.
[17]刘检华,宁汝新,阎艳.集成化虚拟装配工艺规划系统研究[J].中国机械工程,2006,17(23):2486-2491.LIU Jianhua,NING Ruxin,YAN Yan.Study on an integrated virtual assembly process planning system[J].China Mechanical Engineering,2006,17(23):2486-2491.
[18]武殿梁,杨润党,马登哲,等.虚拟装配系统及其关键技术[J].上海交通大学学报,2004,38(9):1539-1543.WU Dianliang,YANG Rundang,MA Dengzhe,et al.Virtual assembly system and the enabling technologies[J].Journal of Shanghai Jiaotong University,2004,38(9):1539-1543.
[19]王峻峰,付艳,李世其.分布环境下面向过程的协同预装配活动模型研究[J].中国机械工程,2006,17(22):2402-2405.WANG Junfeng,FU Yan,LI Shiqi.Research on collaborative process pre-assembly model under distributed environment[J].China Mechanical Engineering,2006,17(22):2402-2405.
[20]夏平均,姚英学,刘江省,等.基于虚拟现实和仿生算法的装配序列优化[J].机械工程学报,2007,43(4):44-52.XIA Pingjun,YAO Yingxue,LIU Jiangsheng,et al.Generation optimized assembly sequence by virtual reality and bionic algorithm[J].Chinese Journal of Mechanical Engineering,2007,43(4):44-52.
[21]南风强,张友良,汪惠芬,等.面向精度的数字化产品装配模型研究及应用[J].中国机械工程,2007,18(9):1071-1075.NAN Fengqiang,ZHANG Youliang,WANG Huifen,et al.Research on precision-oriented digital product assembly model and its applications[J].China Mechanical Engineering,2007,18(9):1071-1075.
[22]张开富,李原,邵毅,等.一种集成装配过程信息的装配建模方法[J].西北工业大学学报,2005,23(2):222-226.ZHANG Kaifu,LI Yuan,SHAO Yi,et al.Including assembly process information in product assembly model for better assembly of product[J].Journal of Northwestern Polytechnical University,2005,23(2):222-226.
[23]王永,刘继红.面向协同装配规划的装配单元规划方法[J].机械工程学报,2009,45(10):172-179.WANG Yong,LIU Jihong.Assembly unit partitioning for collaborative assembly planning[J].Journal of Mechanical Engineering,2009,45(10):172-179.
[24]EGDALL I M.Manufacture of a three-mirror wide-field optical system[J].Optical Engineering,1985,24(2):285-289.
[25]FIGOSKI J W,SHRODE T E,MOORE G F.Computer-aided alignment of a wide-field three-mirror,unobscured,high-resolution[C].Proceedings of SPIEThe International Society for Optical Engineering,1989,1049:166-177.
[26]SCHMID T,THOMPSON K P,ROLLAND J P.Misalignment-induced nodal aberration fields in two-mirror astronomical telescopes[J].Applied Optics,2010,49(16):D131–D144.
[27]SCHMID T,THOMPSON K P,ROLLAND J P.A unique astigmatic nodal property in misaligned Ritchey-Chrétien telescopes with misalignment coma removed[J].Optics Express,2010,18(5):5282–5288.
[28]张斌,韩昌元.离轴非球面三反射镜光学系统装调中计算机辅助优化方法的研究[J].光学学报,2001,21(1):54-58.ZHANG Bin,HAN Changyuan.Study on optimization of computer-aided alignment of a three-mirror off-axis aspherical optical system[J].Acta Optica Sinica,2001,21(1):54-58.
[29]张斌,张晓辉,韩昌元.光学系统计算机辅助装调中的一种优化算法[J].光学精密工程,2000,8(3):273-277.ZHANG Bin,ZHANG Xiaohui,HAN Changyuan.Algorithm for misalignmental determination in computeraided alignment of optical system[J].Optical and Precision Engineering,2000,8(3):273-277.
[30]杨晓飞,张晓辉,韩昌元.Zemax软件在离轴三反射镜系统计算机辅助装调中的应用[J].光学精密工程,2004,12(3):270-274.YANG Xiaofei,ZHANG Xiaohui,HAN Changyuan.Application of Zemax software in alignment of three-mirror off-axis aspherical optical system[J].Optical and Precision Engineering,2004,12(3):270-274.
[31]杨晓飞,张晓辉,韩昌元.用像差逐项优化法装调离轴三反射镜光学系统[J].光学学报,2004,24(1):115-120.YANG Xiaofei,ZHANG Xiaohui,HAN Changyuan.Alignment of a three-mirror off-axis aspherical optical system by using gradual abberration optimization[J].Acta Optica Sinica,2004,24(1):115-120.
[32]罗森,朱永田.计算机辅助装调方法在离轴卡塞格林系统中的应用[J].光学技术,2008,34(4):514-517.LUO Sen,ZHU Yongtian.Application of computer-aided alignment of off-axis cassegrain system[J].Optical Technique,2008,34(4):514-517.
[33]刘剑峰,龙夫年,张伟.离轴三镜系统计算机辅助装调方法研究[J].光学技术,2004,30(5):571-576.LIU Jianfeng,LONG Funian,ZHANG Wei.Study on computer-aided alignment method of off-axis three-mirror system[J].Optical Technique,2004,30(5):571-576.
[34]张伟,刘剑峰,龙夫年.离轴三镜系统光学元件间补偿关系研究[J].光子学报,2005,34(8):1160-1164.ZHANG Wei,LIU Jianfeng,LONG Funian.Study on compensation relationships among the elements in off-axis three-mirror system[J].Acta Photonica Sinica,2005,34(8):1160-1164.
[35]车驰骋,李英才,樊学武,等.基于矢量波像差理论的计算机辅助装调技术的研究[J].光子学报,2008,37(8):1630-1633.CHE Chicheng,LI Yingcai,FAN Xuewu,et al.Research on computer-aided alignment based on vector aberration theory[J].Acta Photonica Sinica,2008,37(8):1630-1633.
[36]孔小辉,樊学武.基于矢量波像差理论的两镜系统装调技术研究[J].激光与光电子进展,2010,47:0822021-0822027.KONG Xiaohui,FAN Xuewu.Alignment of two-mirror aspherical optical system based on vector aberration theory[J].Laser&Optoelectronics Progress,2010,47:0822021-0822027.
[37]薛晓光,李国喜,龚京忠,等.面向装配过程的精密光学系统计算机辅助装调技术[J].计算机集成制造系统,2011,17(10):2163-2170.XUE Xiaoguang,LI Guoxi,GONG Jingzhong,et al.Assembly process oriented computer aided alignment technology of precision optical system[J].Computer Integrated Manufacturing Systems,2011,17(10):2163-2170.
[38]QIN Q,QI Q,LU W,et al.A review of representation models of tolerance information[J].International Journal of Advanced Manufacturing Technology,2017,3:1-14.
[39]CHEN H,JIN S,LI Z M,et al.A comprehensive study of three dimensional tolerance analysis methods[J].Computer-Aided Design,2014,53(5):1-13.
[40]DESROCHERS A,CLEMENT A.A dimensioning and tolerancing assistance model for CAD-CAM systems[J].International Journal of Advanced Manufacturing Technology,1994,9(6):352-361.
[41]蒋科,刘检华,宁汝新,等.基于多色集合理论的几何公差信息推理及其规范性验证[J].计算机集成制造系统,2015,21(3):593-605.JIANG Ke,LIU Jianhua,NING Ruxin,et al.Reasoning and verifying specifications of geometric tolerances based on polychromatic sets theory[J].Computer Integrated Manufacturing Systems,2015,21(3):593-605.
[42]CLEMENT A,BOURDET P.A study of optimal-criteria identification based on the small displacement screw model[J].CIRP Annuals-Manufacturing Technology,1988,37(1):503-506.
[43]DAVIDSON J K,MUJEZINOVIC A,SHAH J J.A new mathematical model for geometric tolerances as applied to round faces[J].Journal Mechanical Design,2002,124(4):609-622.
[44]刘玉生,吴昭同,杨将新,等.基于数学定义的平面尺寸公差数学模型[J].机械工程学报,2001,37(9):12-17.LIU Yusheng,WU Zhaotong,YANG jiangxin,et al.Mathematical model of size tolerance for plane based on mathematical definition[J].Chinese Journal of Mechanical Engineering,2001,37(9):12-17.
[45]BJORKE O,DEVRIES W R.Computer-Aided tolerancing,second edition[J].Journal of Manufacturing Science and Engineering,1991,113(1):118.
[46]周江奇,陈关龙,来新民,等.车身装配尺寸链生成方法[J].机械工程学报,2005,7(41):164-168.ZHOU Jiangqi,CHEN Guanlong,LAI Xinmin,et al.Generation method of auto-mobile body assembly dimension chain[J].Chinese Journal of Mechanical Engineering,2005,7(41):164-168.
[47]王恒,宁汝新,唐承统.三维装配尺寸链的自动生成[J].机械工程学报,2005,6(1):185-191.WANG Heng,NING Ruxin,TANG Chengtong.Automatic generation of 3D assembly dimension chains[J].Chinese Journal of Mechanical Engineering,2005,6(1):185-191.
[48]CLEMENT A,RIVIERE A,SERRE P,et al.The TTRS:13 constraints for dimensioning and tolerancing[J].Global Consistency of Tolerances,1998,(4):122-129.
[49]HU J,XIONG G L,WU Z.A variational geometric constraints network for a tolerance types specification[J].International Journal of Advanced Manufacturing Technology,2004,24(3-4):214-222.
[50]JIN J,SHI J.State space modeling of sheet metal assembly for dimensional control[J].Journal of Manufacturing Science and Engineering,1999,121(7):756-762.
[51]田兆青,来新民,林忠钦.多工位薄板装配偏差流传递的状态空间模型[J].机械工程学报,2007,43(2):202-209.TIAN Zhaoqing,LAI Xinmin,LIN Zhongqin.State space model of variations stream propagation in multistation assembly process of sheet metal[J].Chinese Journal of Mechanical Engineering,2007,43(2):202-209.
[52]洪军,郭俊康,刘志刚,等.基于状态空间模型的精密机床装配精度预测与调整工艺[J].机械工程学报,2013,49(6):114-121.HONG Jun,GUO Junkang,LIU Zhigang,et al.Assembly accuracy prediction and adjustment process modeling of precision machine tool based on state space model[J].Journal of Mechanical Engineering,2013,49(6):114-121.
[53]SINGH P K,JAIN P K,JAIN S C.Important issues in tolerance design of mechanical assemblies.Part 2:tolerance synthesis[J].Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2009,223(10):1249-1287.
[54]王先逵.机械制造工艺学[M].北京:机械工业出版社,2014.WANG Xiankui.Manufactural technology of machinery[M].Beijing:China Machine Press,2014.
[55]任水平,刘检华,何永熹,等.机械产品多质量要求下的选择装配方法[J].计算机集成制造系统,2014,20(9):2117-2126.REN Shuiping,LIU Jianhua,HE Yongxi,et al.Selective assembly method for mechanical product with multi-objective assembly function[J].Computer Integrated Manufacturing Systems,2014,20(9):2117-2126.
[56]朱国权.螺栓联接质量在整车装配中的分析研究与应用[D].上海:上海交通大学,2011.ZHU Guoquan.Research on the quality of the screw joints in the automobile manufacture[D].Shanghai:Shanghai Jiao Tong University,2011.
[57]GB/T16823.2.螺纹紧固件紧固通则[S].北京:国家技术监督局,1997.GB/T16823.2.General rules of tightening for threaded fasteners[S].Beijing:State Bureau of Technology Supervision,1997.
[58]MOTOSH N.Development of design charts for bolts preloaded up to the plastic range[J].ASME Journal of Engineering for Industry,1976,97(1):849-851.
[59]SHIGLEY J E,MISCHKE C R.Mechanical engineering design[M].New York:Mc Graw-Hill,1989.
[60]NASSAR S A,YANG X.Novel formulation of the tightening and breakaway torque components in threaded fasteners[J].Journal of Pressure Vessel Technology,2007,129(9):653-663.
[61]NASSAR S A,BARBER G C,ZOU D.Bearing friction torque in bolted joints[J].Tribology Transactions,2005,48(1):69-75.
[62]NASSAR S A,MATIN P H,BARBER G C.Thread friction torque in bolted joints[J].Journal of Pressure Vessel Technology,2005,127(4):387-393.
[63]YU Q,ZHOU H,WANG L.Finite element analysis of relationship between tightening torque and initial load of bolted connections[J].Advances in Mechanical Engineering,2015,7(5):1-8.
[64]GONG H,LIU J,DING X.Calculation of the effective bearing contact radius for precision tightening of bolted joints[J].Advances in Mechanical Engineering,2016,8(9):1-8.
[65]GANESHMURTHY S,NASSAR S A.Finite element simulation of process control for bolt tightening in joints with nonparallel contact[J].Journal of Manufacturing Science and Engineering,2014,136(2):021018.
[66]林湖,朱正德,陈强努,等.螺栓装配技术中扭矩法与转角法比较研究[J].汽车工艺与材料,2003(9):41-44.LIN Hu,ZHU Zhengde,CHEN Qiangnu,et al.Comparison between torque method and angle method in bolt assembly technology[J].Automobile Technology&Material,2003(9):41-44.
[67]黄伟,陈家权.力矩法、转角法上紧螺栓力矩可靠性分析[J].装备制造技术,2006(4):6-8.HUANG Wei,CHEN Jiaquan.Reliability analysis of moment method and angle method for tightening bolt moment[J].Equipment Manufacturing Technology,2006(4):6-8.
[68]郑友存.屈服区域转角扭矩法拧紧系统[J].柴油机设计与制造,2009,16(2):43-47.ZHENG Youcun.Study on yielded torque-angle tightening system[J].Design and Manufacture of Diesel Engine,2009,16(2):43-47.
[69]JUNKER G H.New criteria for self-loosening of fasteners under vibration[J].SAE Paper No 69005,1969.
[70]YAMAMOTO A,KASEI S.A solution for self-loosening mechanism of threaded fasteners under transverse vibration[J].Journal of the Japan Society of Precision Engineering,1984,18:262-266.
[71]DAABIN A,CHOW Y M.A theoretical model to study thread loosening[J].Mechanism and Machine Theory,1992,27:69-74.
[72]NASSAR S A,YANG X.A mathematical model for vibration-induced loosening of preload threaded fasteners[J].Journal of Vibration and Acoustics,2009,131:021009.
[73]PAI N G,HESS D P.Experimental study of loosening of threaded fasteners due to dynamic shear loads[J].Journal of Sound and Vibration,2002,253(3):585-602.
[74]PAI N G,HESS D P.Three-dimentional finite element analysis of threaded fastener loosening due to dynamic shear load[J].Engineering Failure Analysis,2002,9:383-402.
[75]IZUMI S,YOKOYAMA T,IWASAKI A,et al.Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastener[J].Engineering Failure Analysis,2005,12:604-615.
[76]DINGER G,FRIEDRICH C.Avoiding self-loosening failure of bolted joints with numerical assessment of local contact state[J].Engineering Failure Analysis,2011,18:2188-2200.
[77]SASE N,NISHIOKA K,KOGA S,et al.An anti-loosening screw-fastener innovation and its evaluation[J].Journal of Materials Processing Technology,1998,77:209-215.
[78]SASE N,FUJII H.Optimizing study of SLBs for higher anti-loosening performance[J].Journal of Materials Processing Technology,2001,119:174-179.
[79]RANJAN B S C,VIKRANTH H,GHOSAL A N.A novel prevailing torque threaded fastener and its analysis[J].Journal of Mechanical Design,2013,135:101007.
[80]杨广雪,谢基龙,谢云叶.基于有限元的一种新型螺母的防松机理研究[J].工程力学,2010,27(12):224-243.YANG Guangxue,XIE Jilong,XIE Yunye.Study on mechanism of anti-loosening of a new type of nut based on FEM[J].Engineering Mechanics,2010,27(12):224-243.
[81]KEBIR H,ROELANDT J M,CHAMBON L.Dual boundary element method modelling of aircraft structural joints with multiple site damage[J].Engineering Fractures Mechanics,2006,73:418-434.
[82]WRONICZ W,KANIOWSKI J.Experimental and numerical study of strain progress during and after riveting process for brazier rivet and rivet with compensator-squeezing force and rivet type effect[J].Fatigue of Aircraft Structures,2011,(1):166-190.
[83]SHISHKIN S S.Computation of the contact load in a rivet bond[J].Journal of Machinery Manufacture and Reliability,2010,39(1):43-46.
[84]夏平,唐应时,吴安如.铆钉铆接装配应力的分析和计算[J].机械,2003,30(4):44-45.XIA Ping,TANG Yingshi,WU Anru.Prestressed analsys and calculation on rivets in riveted structure[J].Machinery,2003,30(4):44-45.
[85]ATRE A P,JOHNSON W S.Analysis of the effects of interference and sealant on riveted lap joints[J].Journal of Aircraft,2007,44(2):353-364.
[86]WRONICZ W,KANIOWSKI J,KORZENIEWSKI B,et al.Experimental and numerical study of stress and strain field around the rivet[C].ICAF 2011 Structural Integrity:Influence of Efficiency and Green Imperatives,2010:277-288.
[87]WITEK L.Numerical simulation of riveting process using blind rivet[J].Aviation,2006,10(2):7-12.
[88]XIONG Y,BEDAIR O K.Analytical and finite element modeling of riveted lap joints in aircraft structure[J].Aiaa Journal,2012,37(1):93-99.
[89]ABDELAL G F,GEORGIOU G,COOPER J,et al.Numerical and experimental investigation of aircraft panel deformations during riveting process[J].Journal of Manufacturing Science&Engineering,2014,137(1):54-75.
[90]SZOLWINSKI M P,FARRIS T N.Linking riveting process parameters to the fatigue performance of riveted aircraft structures[J].Journal of Aircraft,2000,37(1):130-137.
[91]LI G,SHI G,BELLINGER N.Effects of clearance fit and friction coefficient on triple-row riveted lap joints[C].American Institute of Aeronautics and Astronautics,2010(3025):1-24.
[92]刘秀全.自冲铆接工艺的试验研究和有限元数值模拟[D].天津:天津大学,2007.LIU Xiuquan.Experimental investigation and finite element numerical simulation of self-piercing riveted process[D].Tianjin:Tianjin University,2007.
[93]RANS C,STRAZNICKY P V,ALDERLIESTEN R.Riveting process induced residual stresses around solid rivets in mechanical joints[J].Journal of Aircraft,2007,44:323-329.
[94]SKORUPA M,SKORUPA A,MACHNIEWICZ T,et al.Effect of production variables on the fatigue behaviour of riveted lap joints[J].International Journal of Fatigue,2010,32:996-1003.
[95]CHERAGHI S H,KRISHNAN K,BAJRACHARYA B.Effect of variations in the riveting process on the quality of riveted joints[J].The International Journal of Advanced Manufacturing Technology,2007,39:1144-1155.
[96]李奕寰,曹增强,张岐良,等.铆模倾角对铆接质量的影响研究[J].航空学报,2013,34(2):426-433.LI Yihuan,CAO Zengqiang,ZHANG Qiliang,et al.Study on the influence of riveting die angle on the quality of riveting[J].Acta Aeronautica et Astronautica Sinica,2013,34(2):426-433.
[97]刘永胜,胡成浩,汪清,等.受拉载荷下C/Si C铆接接头应力的数值模拟与实验验证[J].复合材料学报,2013,30(3):205-210.LIU Yongsheng,HU Haocheng,WANG Qiang,et al.Numerical stimulation and experimental validation of stress in C/Si C riverting joints under tensile load[J].Acta Materiae Compositae Sinica,2013,30(3):205-210.
[98]陈福玉,朱如鹏,蒋红宇,等.孔径对铆接连接件疲劳寿命影响的试验研究[J].机械设计与研究,2011,27(2):98-101.CHEN Fuyu,ZHU Rupeng,JIANG Hongyu,et al.Test study of hole diameter on fatigue life of riveting[J].Machine Design&Research,2011,27(2):98-101.
[99]CHAKHERLOU T N,MIRZAJANZADEH M,ABAZADEH B,et al.An investigation about interference fit effect on improving fatigue life of a holed single plate in joints[J].European Journal of Mechanics A/Solids,2010,29:675-682.
[100]田秀云,刘永.干涉配合铆接对疲劳强度的影响[J].中国民航学院学报,2006,24(4):9-15.TIAN Xiuyun,LIU Yong.Influence of inter ference-fit riveting on fatigue strength[J].Journal of Civel Aviation University of China,2006,24(4):9-15.
[101]MANES A,GIGLIO M,VIGANO F.Effect of riveting process parameters on the local stress field of a T-joint[J].International Journal of Mechanical Science,2011,53:1039-1049.
[102]RIJCK J J M D,HOMAN J J,SCHIJVE J,et al.The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints[J].International Journal of Fatigue,2007,29:2208-2218.
[103]YOON T H,KIM S J.Refined numerical simulation of three-dimensional riveting in laminated composites[J].Journal of Aircraft,2015,48(4):1434-1443.
[104]FOX M E,WITHERS P J.Residual stresses in and around electromagnetically installed rivets measured using synchrotron and neutron diffraction[J].Journal of Neutron Research,2007,15(34):215-223.
[105]曹增强,冯东格.理想干涉配合铆接[J].航空科学技术,2012(04):84-86.CAO Zengqiang,FENG Dongge.Ideal Interference Fit Riveting[J].Aeronautical Science&Technology,2012(04):84-86.
[106]李奕寰,曹增强,张岐良,等.铆模倾角对铆接质量的影响研究[J].航空学报,2013,34(2):426-433.LI Yihuan,CAO Zengqiang,ZHANG Qiliang,et al.Effect study on riveting quality with different angles of riveting die[J].Acta Aeronautica et Astronautica Sinica,2013,34(2):426-433.
[107]JOHNSON T J,MANNING R,ADAMS D E,et al.Diagnostics of tool-part interactions during riveting on an aluminum aircraft fuselage[J].Journal of Aircaft,2006,43(3):779-786.
[108]LUCAS M,DAUD Y.A finite element model of ultrasonic extrusion[C].Journal of Physics:Conference Series.IOP Publishing,2009,181(1):012027.
[109]NGAILE G,BUNGET C.Influence of ultrasonic vibration on microforming[J].Transactions of NAMRI/SME,2008,36:137-144.
[110]SIEGERT K,ULMER J.Influencing the friction in metal forming processes by superimposing ultrasonic waves[J].CIRP Annals-Manufacturing Technology,2001,50(1):195-200.
[111]ABDUL A S,LUCAS M.The effect of ultrasonic excitation in metal forming tests[C].Applied Mechanics and Materials,2010,24:311-316.
[112]ZHANG F,QIN G,ZHANG J,et al.The ultrasonic arc spray forming and its applicational prospect in the field of precious metals[J].Precious Metals,2004,25(2):57-60.
[113]黄健.汽车装配自动拧紧机[D].上海:上海交通大学,2008.HUANG Jian.Fastening machine for automotive assembly[D].Shanghai:Shanghai Jiao Tong University,2008.
[114]张东京.弹体智能拧紧机控制系统的设计与实现[D].重庆:重庆大学,2015.ZHANG Dongjing.The design and implementation of control system of intelligent tight projectile machine[D].Chongqing:Chongqing University,2015.
[115]吴拓.汽车总装车间六-五轴混合自动变位螺母拧紧机方案设计及应用[J].汽车实用技术,2017(11):56-58.WU Tuo.Automotive assembly workshop six-five shaft hybrid automatic translocation nut tightening scheme design and application[J].Automobile Applied Technology,2017(11):56-58.
[116]常凯,郑德超,白洪飞.机器人双轴伺服变距拧紧控制系统的设计[J].制造业自动化,2015,37(11):58-60.CHANG Kai,ZHENG Dechao,BAI Hongfei.Design of the tightening control system of two adjustable distance axis with servo and robot[J].Manufacturing Aotomation,2015,37(11):58-60.
[117]董辉跃,曹国顺,曲巍崴,等.工业机器人自动钻孔及锪窝一体化加工[J].浙江大学学报,2013,47(2):201-208.DONG Huiyue,CAO Guoshun,QU Weiwei,et al.Processing research of industry robots drilling and countersinking automaticly[J].Journal of Zhejiang University,2013,47(2):201-208.
[118]桑大群,苏伟,汪小霞.车身自冲铆接技术[J].汽车与配件,2016,41:78-79.SANG Daqun,SU Wei,WANG Xiaoxia.Automobile self-punching and riveting technology[J].Automobile&Parts,2016,41:78-79.
[119]DACOSTA S.Dassault adaptive cells[J].Industrial Robot,1996,23(1):34-40.
[120]XI F,YU L,TU X.Framework on robotic percussive riverting for aircraft assembly automation[J].Advanced Manufacturing,2013,(1):112-122.
[121]文科,杜福洲.大尺度产品数字化智能对接关键技术研究[J].计算机集成制造系统,2016,22(3):686-694.WEN Ke,DU Fuzhou.Key technologies for digital intelligent of large-scale components[J].Computer Integrated Manufacturing Systems,2016,22(3):686-694.
[122]WANG Q,ZISSLER N,HOLDEN R.Evaluate error sources and uncertainty in large scale measurement systems[J].Robotics and Computer-integrated Manufacturing,2013,29(1):1-11.
[123]郭志敏,蒋君侠,柯映林.一种精密三坐标POGO柱设计与精度研究[J].浙江大学学报(工学版),2009,43(9):1649-1654.GUO Zhimin,JIANG Junxia,KE Yinglin.Design and accuracy for POGO stick with three-axis[J].Journal of Zhejiang University(Engineering Science),2009,43(9):1649-1654.
[124]杜兆才,邹方.多机器人协调操作系统实现飞机大型部件对接的轨迹规划[J].航空制造技术,2009(24):88-91.DU Zhaocai,ZOU Fang.Trajectory planning of large part merging with a multi-robot coordinated manipulation system[J].Aeronautical Manufacturing Technology,2009(24):88-91.
[125]朱剑英.中国制造科学技术与制造产业发展问题的思考[J].数字制造科学,2006,4(1):43-50.ZHU Jianying.On the development of manufacturing science and technology and manufacturing industry in china[J].Digital Manufacture Science,2006,4(1):43-50.
[126]沈飞,徐德,唐永建,等.微操作/微装配中微力觉的测量与控制技术研究现状综述[J].自动化学报,2014,40(5):785-797.SHEN Fei,XU De,TANG Yongjian,et al.Review of measuring and control technology of microforce in micromanipulation and microassembly[J].Acta Automatica Sinica,2014,40(5):785-797.
[127]李庆祥,李玉和.微装配与微操作技术[M].北京:清华大学出版,LI Qingxiang,LI Yuhe.Basic technology on microassembly and micromanipulation[M].Beijing:Tsinghua University Press,2004.
[128]ROBERT B.Assembly of 3D micro-components:A review of recent research[J].Assembly Automation,2011,31(4):309-314.
[129]BOGUE R.Assembly of 3D micro-components:A review of recent research[J].Assembly Automation,2011,31(4):309-314.
[130]KARJALAINEN I,SANDELIN T,UUSITALO J,et al.Robotic assembly and joining of miniature and MEMS components using adhesive films-test environment and experiences[J].Assembly Automation,2004,24(1):58-62.
[131]黄心汉.微装配机器人系统研究与实现[J].华中科技大学学报,2011,82:418-423.HUANG Xinhan.Research and implementation on micro-assembly robotic system[J].Journal of Huazhong University of Science and Technology(Natural Science Edition),2011,82:418-423.
[132]朱萃.基于机器视觉的微小型组件精密测量与装配[D].大连:大连理工大学,2010.ZHU Cui.Machine vision based precise measurement and assembly for miniature components[D].Dalian:Dalian University of Technology,2010.
[133]CHANG H C,LIN A C.Five-axis automated measurement by coordinate measuring machine[J].International Journal of Advanced Manufacturing Technology,2011,55(5-8):657-673.
[134]EIKOTT D F,VELDHUIS S C.CAD-based sampling for CMM inspection of models with sculptured features[J].Engineering with Computers,2007,23(3):187-206.
[135]LI Y,GU P.Geometric estimation of 3D machined parts for internet based manufacturing system[J].Proc.CIRP Conf.Workshop,Hong Kong,May,2002.
[136]WOZNIAK A,MAYER J R R.A robust method for probe tip radius correction in coordinate metrology[J].Measurement Science&Technology,2012,23(2):25001-25008(8).
[137]BEAREE R,DIEULOT J Y,RABATE P.An innovative subdivision-ICP registration method for tool-path correction applied to deformed aircraft parts machining[J].International Journal of Advanced Manufacturing Technology,2011,53(5-8):463-471.
[138]YANG X,WU L,LI J,et al.A minimal kinematic model for serial robot calibration using POE formula[J].Robotics&Computer Integrated Manufacturing,2014,30(3):326-334.
[139]刘振宇,陈英林,曲道奎,等.机器人标定技术研究[J].机器人,2002,24(5):447-450.LIU Zhenyu,CHEN Yinglin,QU Daokui,et al.Research on robot calibration[J].Robot,2002,24(5):447-450.
[140]王学影,刘书桂,王斌,等.关节臂式柔性三坐标测量系统的数学模型及误差分析[J].纳米技术与精密工程,2005,3(4):262-267.WANG Xueying,LIU Shugui,WANG Bin,et al.Mathematical model and error analysis of the articulated arm flexible CMM[J].Nanotechnology and Precision Engineering,2005,3(4):262-267.
[141]郭辉.关节臂式柔性三坐标测量系统关键技术的研究[D].天津:天津大学,2005.GUO Hui.Study on the key technique of articulated arm flexible CMMs[D].Tianjin:Tianjin University,2005.
[142]MARR D.Vision:A computational investigation into the human representation and processing of visual information[M].Henry Holt and Co.,Inc.,1982,8(2):107-111.
[143]SHUPE D L,MOSHIR M.The SIP convention for representing distortion in FITS image headers[J].Astronomical Data Analysis Software&Systems XIV,2005,347:491.
[144]LOWE D G.Three-dimensional object recognition from single two-dimensional images[J].Artificial Intelligence,1987,37:355-395.
[145]黄风山,钱惠芬.光笔式单摄像机三维坐标视觉测量系统[J].光电工程,2007,34(4):69-72.HUANG Fengshan,QIAN Huifen.Single camera 3D coordinate vision measuring system using a light pen[J].Opto-Electronic Engineering,2007,34(4):69-72.
[146]闵新力,万德安,张剑.CCD双目视觉测量系统结构参数设置的理论研究[J].机械设计与制造,2001,25(3):53-56.MIN Xinli,WAN Dean,ZHANG Jian.Theoretical study on structural parameters setting of CCD binocular vision measurement system[J].Machinery Design&Manufacture,2001,25(3):53-56.
[147]KRIZHEVSKY A,SUTSKEVER I,HINTON G E.Image Net classification with deep convolutional neural networks[J].Advances in Neural Information Processing Systems,2012,25:1097-1105.
[148]GIRSHICK R,DONAHUE J,DARRELL T,et al.Rich feature hierarchies for accurate object detection and semantic segmentation.2014:580-587.
[149]FELZENSZWALB P F,GIRSHICK R B,MCALLESTER D,et al.Object detection with discriminatively trained part-based models[J].IEEE Transactions on Pattern Analysis&Machine Intelligence,2010,32(9):1627-1645.
[150]GIRSHICK R,DONAHUE J,DARRELL T,et al.Rich feature hierarchies for accurate object detection and semantic segmentation[J].2014:580-587.
[151]HE K,ZHANG X,REN S,et al.Spatial pyramid pooling in deep convolutional networks for visual recognition[J].IEEE Transactions on Pattern Analysis&Machine Intelligence,2014,37(9):1904-1916.
[152]ZHANG L,KE W,YE Q,et al.A novel laser vision sensor for weld line detection on wall-climbing robot[J].Optics&Laser Technology,2014,60:69-70.
[153]LIU Z,SUN J,WANG H,et al.Simple and fast rail wear measurement method based on structured light[J].Optics and Lasers in Engineering,2011,49(11):1343-1351.
[154]XU J,XI N,ZHANG C,et al.Rapid 3D surface profile measurement of industrial parts using two-level structured light patterns[J].Optics and Lasers in Engineering,2011,49(7):907-914.
[155]BOUCHAIR A,AVERSENG J,ABIDELAH A.Analysis of the behavior of stainless steel bolted connections[J].Journal of Constructional Steel Research,2008(64):1264-1274.
[156]张俊.基于声弹性原理的超声波螺栓紧固力测量技术研究[D].浙江:浙江大学,2005.ZHANG Jun.Research on the ultrasonic measurement technology of bolt tension based on the sono-elasticity principle[D].Zhejiang:Zhejiang University,2005.
[157]MCCARTHY M A,MCCARTHY C T,LAWLOR V P,et al.Three-dimensional finite element analysis of single-bolt,single-lap composite bolted joints:part I—model development and validation[J].Composite Structures,2005,71(2):140-158.
[158]MARSHALL M B,LEWIS R,HOWARD T,et al.Ultrasonic measurement of self-loosening in bolted joints[J].ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996(vols 203-210),2012,226:1869-1884.
[159]WALSH M R,WALSH M E,RAMSEY C A.Perchlorate contamination from the detonation of insensitive high-explosive rounds[J].Journal of Hazardous Materials,2013,262(22):228-233.
[160]程耀瑜.工业射线实时成像检测技术研究及高性能数字成像系统研制[D].南京:南京理工大学,2003.CHENG Yaoyu.Study on industrial radiation real-time lmaging testing technology and development of high performance digital radiography system[D].Nanjing:Nanjing University of Science and Technology,2003.
[161]韩跃平,韩焱,王黎明,等.复杂产品内部结构装配正确性X射线自动检测系统的研究.兵工学报,2012,33:881-885.HAN Yueping,HAN Yan,WANG Liming,et al.Development of X-ray digital radiography automatic inspection system for testing the interior structure of complex product[J].Acta Armamentarii,2012,33:881-885.
[162]黄学文.制造执行系统(MES)的研究和应用[D].大连:大连理工大学,2003.HUANG Xuewen.Research and application of manufacturing execution system(MES)[D].Dalian:Dalian University of Technology,2003.
[163]MESA International.MES functionalities&MRP to MES data flow possibilities[M].Pittsburgh:White Paper Number2,1997.
[164]柴天佑,郑秉霖,胡毅,等.制造执行系统的研究现状和发展趋势[J].控制工程,2005,12(6):505-510.CHAI Tianyou,ZHENG Binglin,HU Yi,et al.Current research situation and development of manufacturing execution systems[J].Control Engineering of China,2005,12(6):505-510.
[165]朱传军,饶运清,张超勇,等.基于CORBA的可重构制造执行系统研究[J].中国机械工程,2004,15(23):2097-2101.ZHU Chuanjun,RAO Yunqing,ZHANG Chaoyong,et al.Research on reconfigurable manufacturing executive system based on CORBA[J].China Mechanical Engineering,2004,15(23):2097-2101.
[166]ZHANG Y,ZHANG G,WANG J,et al.Real-time information capturing and integration framework of the internet of manufacturing things[J].International Journal of Computer Integrated Manufacturing,2015,28(8):811-822.
[167]ZHOU G,XIAO Z,JIANG P,et al.A radio frequency identification based optimal material delivery method for digital plant production[J].International Journal of Computer Integrated Manufacturing,24(5):493-505.
[168]QU T,YANG H D,HUANG G Q,et al.A case of implementing RFID-based real-time shop-floor material management for household electrical appliance manufacturers[J].Journal of Intelligent Manufacturing,2012,23:2343–2356.
[169]DELICE Y,AYDO?AN E K,?ZCAN U,et al.A modified particle swarm optimization algorithm to mixed-model two-sided assembly line balancing[J].Journal of Intelligent Manufacturing,2017,28(1):23-36.
[170]刘检华,白书清,段华,等.面向手工装配的计算机辅助装配过程控制方法[J].计算机集成制造系统,2009,15(12):2391-2398.LIU Jianhua,BAI Shuqing,DUAN Hua,et al.Computer aided assembly process control method for manual assembly[J].Computer Integrated Manufacturing Systems,2009,15(12):2391-2398.
[171]万峰,刘检华,宁汝新,等.面向复杂产品离散装配过程的数据采集和管理方法[J].计算机集成制造系统,2012,18(8):1819-1828.WAN Feng,LIU Jianhua,NING Ruxin,et al.A data collection&management method for discrete assembly process of complex product[J].Computer Integrated Manufacturing Systems,2012,18(8):1819-1828.
[172]庄存波,刘检华,熊辉,等.复杂产品装配现场动态实时可视化监控系统[J].计算机集成制造系统,2017,23(6):1264-1276.ZHUANG Cunbo,LIU Jianhua,XIONG Hui,et al.Assembly shop floor dynamic and real-time visual monitoring system for complex product[J].Computer Integrated Manufacturing Systems,2017,23(6):1264-1276.
[173]万峰,刘检华,宁汝新,等.面向航天产品装配过程的可视化生产调度技术[J].计算机集成制造系统,2013,19(4):755-765.WAN Feng,LIU Jianhua,NING Ruxin,et al.Visual production scheduling technology for the complex product assembly process[J].Computer Integrated Manufacturing Systems,2013,19(4):755-765.
[174]庄存波,刘检华,唐承统,等.航天产品离散装配过程中的物料动态跟踪与管理技术[J].计算机集成制造系统,2015,21(1):108-122.ZHUANG Cunbo,LIU Jianhua,TANG Chengtong,et al.Material dynamic tracking and management technology for discrete assembly process of complex product[J].Computer Integrated Manufacturing Systems,2015,21(1):108-122.
[175]周子岩,刘检华,唐承统,等.航天产品研制中的实做装配工艺技术[J].计算机集成制造系统,2014,20(8):1859-1869.ZHOU Ziyan,LIU Jianhua,TANG Chengtong,et al.Implemented assembly process technology for complex product’s development[J].Computer Integrated Manufacturing Systems,2014,20(8):1859-1869.
[176]朱海平,苟坤,何非,等.飞机装配制造执行系统关键技术研究及系统实现[J].航空制造技术,2012,411(15):26-29.ZHU Haiping,GOU Kun,HE Fei,et al.Key technology of aircraft assembly manufacturing execution system and its implementation[J].Aeronautical Manufacturing Technology,2012,411(15):26-29.
[177]GE Y,WANG A.Spatial scheduling strategy for irregular curved blocks based on the modified genetic ant colony algorithm(MGACA)in shipbuilding[J].International Journal of Production Research,2017(3):1-17.
[178]陶飞,张萌,程江峰,等.数字孪生车间:一种未来车间运行新模式[J].计算机集成制造系统,2017,23(1):1-9.TAO Fei,ZHANG Meng,CHENG Jiangfeng,et al.Digital twin workshop:A new paradigm for future workshop[J].Computer Integrated Manufacturing Systems,2017,23(1):1-9.
[179]庄存波,刘检华,熊辉,等.产品数字孪生体的内涵、体系结构及其发展趋势[J].计算机集成制造系统,2017,23(4):753-768.ZHUANG Cunbo,LIU Jianhua,XIONG Hui,et al.Connotation,architecture and trends of product digital twin[J].Computer Integrated Manufacturing Systems,2017,23(4):753-768.
[180]ZHUANG C,LIU J,XIONG H.Digital twin-based smart production management and control framework for the complex product assembly shop-floor[J].The International Journal of Advanced Manufacturing Technology,2018,96(1-4):1149-1163.
[181]BOOTHROYD G.Assembly automation and product design[M].New York:Marcel Dekker,1992.
[182]布斯劳G,德赫斯特P,耐特W.面向制造与装配的产品设计[M].北京:机械工业出版社,1999.BOOTHROYD G,DEWHURST P,KNIGHT W.Product design for manufacture and assembly[M].Beijing:China Machine Press,1999.
[183]张林鍹,童秉枢.并行工程中的装配仿真系统及其关键技术研究[J].计算机辅助设计与图形学学报,1999,11(2):163-167.ZHANG Linxuan,TONG Bingshu.Study on an assembly simulation system in CE and its key technologies[J].Journal of Computer Aided Design&Computer Graphics,1999,11(2):163-167.
[184]MENCIASSI A,EISINBERG A,IZZO I,et al.From“macro”to"micro" manipulation:Models and experiments[J].IEEE/ASME Transactions on Mechatronics,2004,9(2):311-320.