缸体压铸模缸套卡滞问题解决

详细信息    查看全文 | 推荐本文 |

英文篇名：Corrections for Locked Cylinder Liner on Die-Casting Die of Cylinder Block 作者：侯华明 ; 杜磊 ; 谢晓亮 英文作者：Hou Huaming;Du Lei;Xie Xiaoliang; 关键词：缸体 ; 压铸模 ; 缸套 ; 缸套柱 ; 变形 英文关键词：cylinder block;;die-casting die;;cylinder liner;;cylinder liner pillar;;deformation 中文刊名：MJZZ 英文刊名：Die & Mould Manufacture 机构：长城汽车股份有限公司技术中心河北省汽车工程技术研究中心; 出版日期：2019-05-08 出版单位：模具制造 年：2019 期：v.19;No.214 语种：中文; 页：MJZZ201905024 页数：3 CN：05 ISSN：44-1542/TH 分类号：68-70

摘要

针对缸体压铸模生产过程中缸套卡滞问题进行分析,通过对缸套、缸套柱制造精度及配合间隙等数据进行分析、研讨,并对压铸件变形情况进行检测,明确缸套卡滞问题原因,制定相应对策,保证缸体压铸模连续生产,提高生产效率。
        This paper will have an analysis of cylinder liner being locked in the cylinder liner pillar in the course of die-casting die of cylinder block manufacturing, analyzing and discussing the data of cylinder liner and its pillar about their precision and tolerance clearance. This paper also has a detailed introduction to the detection results of products deformation. Through the approaches above, this paper will explicate the concrete reasons for the stuck issue and take corresponding measurements. By doing these, die-casting die of cylinder block can be manufactured smoothly to promote the production efficiency.

引文

[1]王鹏驹,殷国富.压铸模具设计师手册[M].北京:机械工业出版,2008.