3D打印聚合物材料的研究进展
|
摘要
综述了市场使用较多的立体光固化成型(SLA)、熔融沉积成型(FDM)和选择性激光烧结(SLS)3种3D打印技术所使用的聚合物材料的研究进展。
The research progress of polymeric materials for 3D printing techniques of three most common used in market,including stereo lithography apparatus( SLA),fused deposition modeling( FDM),selective laser sintering( SLS)were reviewed.
The research progress of polymeric materials for 3D printing techniques of three most common used in market,including stereo lithography apparatus( SLA),fused deposition modeling( FDM),selective laser sintering( SLS)were reviewed.
引文
[1]萩原恒夫.3Dプリンタ材料の最新動向と今後の展望[J].日本画像学会誌,2015,54(4):293-300.
[2]闵玉勤,王浩仁,黄伟,等.适应3D打印技术的聚合物材料研究进展[J].粘接,2016,37(1):36-41.
[3]刘甜,胡晓玲,方淦,等.用于3D打印光固化树脂的制备和性能测试[J].工程塑料应用,2014,42(10):20-23.
[4]段玉岗,王学让,王素琴,等.一种用于激光固化快速成形的低翘曲光敏树脂的研究[J].西安交通大学学报,2001,35(11):1155-1158,1174.
[5]侯桂香,高俊刚,李波.甲基丙烯酸缩水甘油酯/环氧丙烯酸酯自由基-阳离子混杂光固化行为及膜层性能[J].材料保护,2015,48(5):9-12.
[6]Shofner M L,Lozano K,Rodriguez-Macias F J,et al.Nanofiberreinforced polymers prepared by fused deposition modeling[J].J.Appl.Polym.Sci.,2003,89(11):3081.
[7]方禄辉,孙东成,曹艳霞,等.SBS对3D打印ABS性能的影响[J].工程塑料应用,2015,43(9):54.
[8]邱军,肖湘莲,杨义浒,等.一种ABS合金材料及其制备方法:CN 104974461A[P].2015-10-14.
[9]陈庆,曾军堂,陈韦坤.3D打印塑料材料技术现状和发展趋势[J].新材料产业,2015(6):27-32.
[10]Jian-Yuan Lee,Jia An,Chee Kai Chua.Fundamentals and applications of 3D printing for novel materials[J].Applied Materials Today,2017,7(1):120-133.
[11]管国虎,李春成,朱文祥.一种3D打印芳香族聚酯材料及其制备方法:CN 103980675B[P].2014-08-13.
[12]Shemelya C M,Armando Rivera,Angel Torrado Perez,et al.Mechanical,electromagnetic,and X-ray shielding characterization of a 3D printable tungsten-polycarbonate polymer matrix composite for space-based applications[J],Journal of Electronic Materials,2015,44(8):2598-2607.
[13]Tomoya Tsuboi,Tadanori Yoshimura,Hiroki Sawada,et al.Development of polyester composite as water-soluble support material for 3D printer[J].NIP&Digital Fabrication Conference,2017(1):156-159.
[14]陈硕平,易和平,罗志虹,等.高分子3D打印材料和打印工艺[J].材料导报A:综述篇,2016,30(4):54-58.
[2]闵玉勤,王浩仁,黄伟,等.适应3D打印技术的聚合物材料研究进展[J].粘接,2016,37(1):36-41.
[3]刘甜,胡晓玲,方淦,等.用于3D打印光固化树脂的制备和性能测试[J].工程塑料应用,2014,42(10):20-23.
[4]段玉岗,王学让,王素琴,等.一种用于激光固化快速成形的低翘曲光敏树脂的研究[J].西安交通大学学报,2001,35(11):1155-1158,1174.
[5]侯桂香,高俊刚,李波.甲基丙烯酸缩水甘油酯/环氧丙烯酸酯自由基-阳离子混杂光固化行为及膜层性能[J].材料保护,2015,48(5):9-12.
[6]Shofner M L,Lozano K,Rodriguez-Macias F J,et al.Nanofiberreinforced polymers prepared by fused deposition modeling[J].J.Appl.Polym.Sci.,2003,89(11):3081.
[7]方禄辉,孙东成,曹艳霞,等.SBS对3D打印ABS性能的影响[J].工程塑料应用,2015,43(9):54.
[8]邱军,肖湘莲,杨义浒,等.一种ABS合金材料及其制备方法:CN 104974461A[P].2015-10-14.
[9]陈庆,曾军堂,陈韦坤.3D打印塑料材料技术现状和发展趋势[J].新材料产业,2015(6):27-32.
[10]Jian-Yuan Lee,Jia An,Chee Kai Chua.Fundamentals and applications of 3D printing for novel materials[J].Applied Materials Today,2017,7(1):120-133.
[11]管国虎,李春成,朱文祥.一种3D打印芳香族聚酯材料及其制备方法:CN 103980675B[P].2014-08-13.
[12]Shemelya C M,Armando Rivera,Angel Torrado Perez,et al.Mechanical,electromagnetic,and X-ray shielding characterization of a 3D printable tungsten-polycarbonate polymer matrix composite for space-based applications[J],Journal of Electronic Materials,2015,44(8):2598-2607.
[13]Tomoya Tsuboi,Tadanori Yoshimura,Hiroki Sawada,et al.Development of polyester composite as water-soluble support material for 3D printer[J].NIP&Digital Fabrication Conference,2017(1):156-159.
[14]陈硕平,易和平,罗志虹,等.高分子3D打印材料和打印工艺[J].材料导报A:综述篇,2016,30(4):54-58.