摘要
分析了实际工况下控制阀固有流量特性发生畸变的原因,给出了按工作流量特性设计控制阀阀瓣的方法,提高了控制系统稳定性。
The inherent flow characteristic is changed w hen used in real process,and the properties of the control system may be pool in stability. The design method of the control valve according to the installed flow characteristic is discussed in the paper,and it can effectively improve the control system stability.
引文
[1]何衍庆,邱宣振,杨洁,等.控制阀工程设计与应用[M].北京:化学工业出版社,2005.
[2]中国石化集团上海工程有限公司.化工工艺设计手册(上)[M].北京:化学工业出版社,2009.
[3]邱宣振.工程自动化设计应用手册[M].北京:国际科教文出版社,2004.
[4]Emerson Process Management.Control Valve Handbook.3th Ed.Fisher Controls International,Inc,2001.
[5]陆培文.调节阀实用技术[M].北京:机械工业出版社,2006.
[6]陈兵.等百分比流量特性调节阀阀瓣型线的研究[D].甘肃工业大学硕士学位论文,1999.
[7]GB/T 17213.2-2005,工业过程控制阀第2-1部分流通能力安装条件下流体流量的计算公式[S].
[8]Nesbitt B.张清双,等译.阀门和驱动装置技术手册[M].北京:化学工业出版社,2010.