摘要
针对机车油箱漏油在机务段维修补焊难题,通过分析造成油箱漏油的缺陷及现场情况,制定了合理的焊接工艺并实施,总结了一套焊补油箱的工艺操作方法。结果表明:选择正确的焊接参数、坡口形式和焊条电弧焊断弧焊的焊接工艺补焊油箱,完全能够满足油箱结构的设计及使用要求。
This paper aims at the difficult problem of repairing and welding the oil leakage of locomotive oil tank in the locomotive depot,through the analysis of the defects which cause oil leakage of the oil tank and the site situation,we develop a reasonable welding process and implement it,then summarize a set of welding operation method for oil tank. The results show that the selection of the correct welding parameters,groove form,and the welding process of manual arc breaking arc welding repair welding oil tank can completely meet the requirements of tank structure design and operating.
引文
[1]刘云龙.焊工技师手册[M].北京:机械工业出版社,2004.
[2]梁贤福.油箱破损带压不换动火焊补可靠性和实用性[J].汽车与配件,1995(5):23-24.
[3]蔡新华,周青.油浸式变压器带油补焊效果分析[J].现代工业经济与信息化,2015,5(10):34-35.
[4]齐卫平.论野外快速焊油箱方法[J].现代焊接,2007,56(8):47-48.
[5]王竹林,刘广喜.燃油箱的安全补焊[J].江苏农机与农艺,1999(4):23-24.