添加第三组元对机械合金化纳米复合二元互不溶体系合金的影响研究进展
|
摘要
机械合金化制备的具有纳米复合结构的二元互不溶体系合金表现出与其微米尺度结构合金所不同的独特性能。为了进一步提高其综合性能,通常在二元互不溶体系合金中添加第三组元。综述了添加第三组元对机械合金化制备的具有纳米复合结构的二元互不溶体系合金的影响,着重介绍了添加第三组元对二元互不溶体系合金组织结构和性能的影响。
The binary immiscible system alloys with nano-composite structure prepared by mechanical alloying show the unique properties compared with micro-scale structure. The third component is generally added into binary immiscible system alloys to further improve their comprehensive properties. The effect of the third component addition on binary immiscible system alloys with nano-composite structure prepared by mechanical alloying was reviewed,with focus on the microstructure and properties.
The binary immiscible system alloys with nano-composite structure prepared by mechanical alloying show the unique properties compared with micro-scale structure. The third component is generally added into binary immiscible system alloys to further improve their comprehensive properties. The effect of the third component addition on binary immiscible system alloys with nano-composite structure prepared by mechanical alloying was reviewed,with focus on the microstructure and properties.
引文
[1]吴志方,刘超,周帆,等.二元互不溶体系合金机械合金化的热力学研究进展[J].粉末冶金工业,2016,26(2):58.
[2]Csanandy A,Sajo I,Labar J L,et al.Al-Pb nanocomposites made by mechanical alloying and consolidation[J].Current Applied Physics,2006,6(2):131.
[3]LIU X,ZENG M Q,MA Y,et al.Wear behavior of Al-Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering[J].Wear,2008,265(11/12):1857.
[4]刘玉红,史庆南.机械合金化制备Cu-Pb合金粉末的研究[J].昆明理工大学学报,2001,26(2):22.
[5]FANG Q,KANG Z X.An investigation on morphology and structure of Cu-Cr alloy powders prepared by mechanical milling and alloying[J].Powder Technology,2015,270(1):104.
[6]吴志方,周帆.Fe-Cu二元互不溶体系中纳米晶过饱和固溶体的机械合金化制备研究进展[J].粉末冶金工业,2015,25(2):52.
[7]吴志方,刘超.互不溶体系轴承合金的机械合金化研究进展[J].粉末冶金工业,2017,27(1):59.
[8]Ueda Y,Ikeda S,Mori Y,et al.Magnetoresistance and magnetism in Fe-Cu alloys produced by electrodeposition and mechanical alloying method[J].Materials Science and Engineering:A,1996,217(96):371.
[9]LIU X,ZENG M Q,MA Y,et al.Promoting the high loadcarrying capability of Al-20wt%Sn bearing alloys through creat-ing nanocomposite structure by mechanical alloying[J].Wear,2012,294/295(31):387.
[10]舒晓飞.添加Si对机械合金化Al-Sn系轴承合金的组织结构及性能影响[D].广州:华南理工大学,2012.
[11]WU Z F,ZENG M Q,OUYANG L Z,et al.Ostwald ripening of Pb nanocrystalline phase in mechanically milled Al-Pb alloys and the influence of Cu additive[J].Scripta Materialia,2005,53(5):529.
[12]马迎,刘辛,胡仁宗,等.Al-20%Sn-4.5%Cu合金在高能球磨和烧结中的组织[J].金属热处理,2009,34(6):59.
[13]叶新.高性能Al-12%Sn-x%Si轴瓦带材的制备及性能研究[D].广州:华南理工大学,2014.
[14]潘忠良.添加Mg对多尺度结构Al-12%Sn轴承合金组织结构与性能的影响[D].广州:华南理工大学,2013.
[15]曾美琴,张耀,欧阳柳章,等.机械合金化制备的Al-Pb-Cu合金结构与摩擦性能[J].金属学报,2002,38(8):814.
[16]ZHU M,OUYANG L Z,WU Z F,et al.The effect of Cu addition and milling contaminations on the microstructure evolution of ball milled Al-Pb alloy during sintering[J].Materials Science and Engineering:A,2006,434(1/2):352.
[17]马迎.添加Cu后Al-20%Sn系合金的机械合金化制备及其性能研究[D].广州:华南理工大学,2008.
[18]叶新,鲁忠臣,曾美琴,等.Si添加量对机械合金化Al-12%Sn合金组织与摩擦性能的影响[J].中国有色金属学报,2014,24(1):53.
[19]李增峰,汤慧萍,刘海彦,等.添加活化元素Ni对Mo-Cu合金性能的影响[J].稀有金属快报,2006,25(1):29.
[20]LU Z C,ZENG M Q,GAO Y,et al.Significant improvement of wear properties by creating micro/nano dual-scale structure in Al-Sn alloy[J].Wear,2012,296(1/2):469.
[21]LU Z C,GAO Y,ZENG M Q,et al.Improving wear performance of dual-scale Al-Sn alloys:the role of Mg addition in enhancing Sn distribution and tribolayer stability[J].Wear,2014,309(1/2):216.
[22]Bravo A E,Duran H A,Jacobo V H,et al.Towards new formulations for journal bearing alloys[J].Wear,2013,302(1/2):1528.
[23]ZHU M,ZENG M Q,GAO Y,et al.Microstructure and wear properties of Al-Pb-Cu alloys prepared by mechanical alloying[J].Wear,2002,253(7):832.
[24]罗守靖,李金平,牛玮,等.第三组元对爆炸压实Cu Cr合金性能的影响[J].兵器材料科学与工程,2001,24(5):43.
[2]Csanandy A,Sajo I,Labar J L,et al.Al-Pb nanocomposites made by mechanical alloying and consolidation[J].Current Applied Physics,2006,6(2):131.
[3]LIU X,ZENG M Q,MA Y,et al.Wear behavior of Al-Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering[J].Wear,2008,265(11/12):1857.
[4]刘玉红,史庆南.机械合金化制备Cu-Pb合金粉末的研究[J].昆明理工大学学报,2001,26(2):22.
[5]FANG Q,KANG Z X.An investigation on morphology and structure of Cu-Cr alloy powders prepared by mechanical milling and alloying[J].Powder Technology,2015,270(1):104.
[6]吴志方,周帆.Fe-Cu二元互不溶体系中纳米晶过饱和固溶体的机械合金化制备研究进展[J].粉末冶金工业,2015,25(2):52.
[7]吴志方,刘超.互不溶体系轴承合金的机械合金化研究进展[J].粉末冶金工业,2017,27(1):59.
[8]Ueda Y,Ikeda S,Mori Y,et al.Magnetoresistance and magnetism in Fe-Cu alloys produced by electrodeposition and mechanical alloying method[J].Materials Science and Engineering:A,1996,217(96):371.
[9]LIU X,ZENG M Q,MA Y,et al.Promoting the high loadcarrying capability of Al-20wt%Sn bearing alloys through creat-ing nanocomposite structure by mechanical alloying[J].Wear,2012,294/295(31):387.
[10]舒晓飞.添加Si对机械合金化Al-Sn系轴承合金的组织结构及性能影响[D].广州:华南理工大学,2012.
[11]WU Z F,ZENG M Q,OUYANG L Z,et al.Ostwald ripening of Pb nanocrystalline phase in mechanically milled Al-Pb alloys and the influence of Cu additive[J].Scripta Materialia,2005,53(5):529.
[12]马迎,刘辛,胡仁宗,等.Al-20%Sn-4.5%Cu合金在高能球磨和烧结中的组织[J].金属热处理,2009,34(6):59.
[13]叶新.高性能Al-12%Sn-x%Si轴瓦带材的制备及性能研究[D].广州:华南理工大学,2014.
[14]潘忠良.添加Mg对多尺度结构Al-12%Sn轴承合金组织结构与性能的影响[D].广州:华南理工大学,2013.
[15]曾美琴,张耀,欧阳柳章,等.机械合金化制备的Al-Pb-Cu合金结构与摩擦性能[J].金属学报,2002,38(8):814.
[16]ZHU M,OUYANG L Z,WU Z F,et al.The effect of Cu addition and milling contaminations on the microstructure evolution of ball milled Al-Pb alloy during sintering[J].Materials Science and Engineering:A,2006,434(1/2):352.
[17]马迎.添加Cu后Al-20%Sn系合金的机械合金化制备及其性能研究[D].广州:华南理工大学,2008.
[18]叶新,鲁忠臣,曾美琴,等.Si添加量对机械合金化Al-12%Sn合金组织与摩擦性能的影响[J].中国有色金属学报,2014,24(1):53.
[19]李增峰,汤慧萍,刘海彦,等.添加活化元素Ni对Mo-Cu合金性能的影响[J].稀有金属快报,2006,25(1):29.
[20]LU Z C,ZENG M Q,GAO Y,et al.Significant improvement of wear properties by creating micro/nano dual-scale structure in Al-Sn alloy[J].Wear,2012,296(1/2):469.
[21]LU Z C,GAO Y,ZENG M Q,et al.Improving wear performance of dual-scale Al-Sn alloys:the role of Mg addition in enhancing Sn distribution and tribolayer stability[J].Wear,2014,309(1/2):216.
[22]Bravo A E,Duran H A,Jacobo V H,et al.Towards new formulations for journal bearing alloys[J].Wear,2013,302(1/2):1528.
[23]ZHU M,ZENG M Q,GAO Y,et al.Microstructure and wear properties of Al-Pb-Cu alloys prepared by mechanical alloying[J].Wear,2002,253(7):832.
[24]罗守靖,李金平,牛玮,等.第三组元对爆炸压实Cu Cr合金性能的影响[J].兵器材料科学与工程,2001,24(5):43.