高瓦斯煤层切顶卸压无煤柱自成巷技术应用研究
|
摘要
针对传统的沿空留巷技术多是采用靠采空区一侧巷旁充填等方法进行护巷,存在成本较高、施工工艺复杂、施工进度较慢等问题,以杜儿坪煤矿高瓦斯煤层62711工作面为研究对象,研究了切顶卸压无煤柱自成巷技术,从预裂切缝关键参数设计、留巷补强加固支护、采空区挡矸支护、瓦斯安全管理方法等方面详细分析了切顶卸压无煤柱自成巷工艺流程,并在工作面进行了矿压监测分析。分析结果表明,杜儿坪煤矿采用切顶卸压无煤柱自成巷技术实现了对采场的卸压作用,成功保留了62711工作面轨道运输巷作为下一邻近工作面的胶带运输巷使用,明显提高了煤炭回采率,缓解了煤矿采掘衔接紧张,避免了残留煤柱导致的相关矿山灾害;"Y"型通风方式的使用有效地解决了工作面上隅角瓦斯积聚问题。
In view of problems of high cost,complex construction technology and slow construction progress existed in traditional gob-side entry retaining technology which mostly adopts method of filling at the side of goaf to protect the roadway,the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release in high gas coal seam was studied taking 62711 working face in high gas coal seam of Duerping Coal Mine as research object.The technical process of the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release was analyzed in detail from the aspects of key parameters design of pre-splitting and cutting joints,entry retaining reinforcement and support,gangue retaining support in goaf,gas safety management method,and rock pressure monitoring was carried out on the working face.The analysis results show that application of the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release in Duerping Coal Mine realizes pressure release effect on the stope,and successfully keep track transportation roadway of 62711 working face as the next adjacent working face belt transportation roadway,which obviously improves coal recovery rate,relieve the tension between coal mining and tunneling,and avoids mine disasters caused by residual coal pillars.In addition,the use of " Y" type ventilation mode effectively solves the problem of gas accumulation in the upper corner of the working face.
In view of problems of high cost,complex construction technology and slow construction progress existed in traditional gob-side entry retaining technology which mostly adopts method of filling at the side of goaf to protect the roadway,the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release in high gas coal seam was studied taking 62711 working face in high gas coal seam of Duerping Coal Mine as research object.The technical process of the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release was analyzed in detail from the aspects of key parameters design of pre-splitting and cutting joints,entry retaining reinforcement and support,gangue retaining support in goaf,gas safety management method,and rock pressure monitoring was carried out on the working face.The analysis results show that application of the technology of non-pillar gob-side entry retaining formed by roof cutting and pressure release in Duerping Coal Mine realizes pressure release effect on the stope,and successfully keep track transportation roadway of 62711 working face as the next adjacent working face belt transportation roadway,which obviously improves coal recovery rate,relieve the tension between coal mining and tunneling,and avoids mine disasters caused by residual coal pillars.In addition,the use of " Y" type ventilation mode effectively solves the problem of gas accumulation in the upper corner of the working face.
引文
[1]宋振骐,崔增娣,夏洪春,等.无煤柱矸石充填绿色安全高效开采模式及其工程理论基础研究[J].煤炭学报,2010,35(5):705-710.SONG Zhenqi,CUI Zengdi,XIA Hongchun,et al.The fundemental theoretial and engineering research on the green safe no coal pillar mining model by mainly using coal gangue backfill[J].Journal of China Coal Society,2010,35(5):705-710.
[2]秦永祥,许少东,杨张杰.深井沿空掘巷煤柱合理宽度确定及支护参数优化[J].煤炭科学技术,2010,38(2):15-18.QIN Yongxiang,XU Shaodong,YANG Zhangjie.Rational coal pillar width determined and support parameter optimized for gateway driving along goaf in deep mine[J].Coal Science and Technology,2010,38(2):15-18.
[3]杜计平,孟宪锐.采矿学[M].徐州:中国矿业大学出版社,2009.
[4]张农,韩昌良,阚甲广,等.沿空留巷围岩控制理论与实践[J].煤炭学报,2014,39(8):1635-1641.ZHANG Nong,HAN Changliang,KAN Jiaguang,et al.Theory and practice of surrounding rock control for pillarless gob-side entry retaining[J].Journal of China Coal Society,2014,39(8):1635-1641.
[5]蔡峰.坚硬顶板切顶卸压无煤柱开采技术研究[J].矿业安全与环保,2017,44(5):1-5.CAI Feng.Research on pillarless mining techenique by top-cut pressure relief of hard roof[J].Mining Safety &Environmental Protection,2017,44(5):1-5.
[6]HE Manchao, ZHU Guolong, GUO Zhibiao.Longwall mining"cutting cantilever beam theory"and110mining method in China—the third mining science innovation[J].Journal of Rock Mechanics and Geotechnical Engineering,2015,7(5):483-492.
[7]何满潮,朱国龙.“十三五”矿业工程发展战略研究[J].煤炭工程,2016,48(1):1-6.HE Manchao, ZHU Guolong. Research on development strategy of mining engineering in the Thirteenth Five-Year Plan[J].Coal Engineering,2016,48(1):1-6.
[8]何满潮,宋振骐,王安,等.长壁开采切顶短壁梁理论及其110工法——第三次矿业科学技术变革[J].煤炭科技,2017,45(1):1-9.HE Manchao,SONG Zhenqi,WANG An.Theory of longwall mining by using roof cuting shortwall team and 110 method—the third mining science and technology reform[J].Coal Science and Technology Magazine,2017,45(1):1-9.
[9]郭志飚,王将,曹天培,等.薄煤层切顶卸压自动成巷关键参数研究[J].中国矿业大学学报,2016,45(5):879-885.GUO Zhibiao,WANG Jiang,CAO Tianpei,et al.Research on key parameters of gob-side entry retaining automatically formed by roof cutting and pressure release in thin coal seam mining[J].Journal of China University of Mining &Technology,2016,45(5):879-885.
[10]张斌.均压通风防灭火技术的应用实践[J].煤矿安全,2011,42(2):96-98.ZHANG Bin.Application practice of pressurebalanced ventilation fire prevention and extinguishing technology[J].Safety in Coal Mines,2011,42(2):96-98.
[2]秦永祥,许少东,杨张杰.深井沿空掘巷煤柱合理宽度确定及支护参数优化[J].煤炭科学技术,2010,38(2):15-18.QIN Yongxiang,XU Shaodong,YANG Zhangjie.Rational coal pillar width determined and support parameter optimized for gateway driving along goaf in deep mine[J].Coal Science and Technology,2010,38(2):15-18.
[3]杜计平,孟宪锐.采矿学[M].徐州:中国矿业大学出版社,2009.
[4]张农,韩昌良,阚甲广,等.沿空留巷围岩控制理论与实践[J].煤炭学报,2014,39(8):1635-1641.ZHANG Nong,HAN Changliang,KAN Jiaguang,et al.Theory and practice of surrounding rock control for pillarless gob-side entry retaining[J].Journal of China Coal Society,2014,39(8):1635-1641.
[5]蔡峰.坚硬顶板切顶卸压无煤柱开采技术研究[J].矿业安全与环保,2017,44(5):1-5.CAI Feng.Research on pillarless mining techenique by top-cut pressure relief of hard roof[J].Mining Safety &Environmental Protection,2017,44(5):1-5.
[6]HE Manchao, ZHU Guolong, GUO Zhibiao.Longwall mining"cutting cantilever beam theory"and110mining method in China—the third mining science innovation[J].Journal of Rock Mechanics and Geotechnical Engineering,2015,7(5):483-492.
[7]何满潮,朱国龙.“十三五”矿业工程发展战略研究[J].煤炭工程,2016,48(1):1-6.HE Manchao, ZHU Guolong. Research on development strategy of mining engineering in the Thirteenth Five-Year Plan[J].Coal Engineering,2016,48(1):1-6.
[8]何满潮,宋振骐,王安,等.长壁开采切顶短壁梁理论及其110工法——第三次矿业科学技术变革[J].煤炭科技,2017,45(1):1-9.HE Manchao,SONG Zhenqi,WANG An.Theory of longwall mining by using roof cuting shortwall team and 110 method—the third mining science and technology reform[J].Coal Science and Technology Magazine,2017,45(1):1-9.
[9]郭志飚,王将,曹天培,等.薄煤层切顶卸压自动成巷关键参数研究[J].中国矿业大学学报,2016,45(5):879-885.GUO Zhibiao,WANG Jiang,CAO Tianpei,et al.Research on key parameters of gob-side entry retaining automatically formed by roof cutting and pressure release in thin coal seam mining[J].Journal of China University of Mining &Technology,2016,45(5):879-885.
[10]张斌.均压通风防灭火技术的应用实践[J].煤矿安全,2011,42(2):96-98.ZHANG Bin.Application practice of pressurebalanced ventilation fire prevention and extinguishing technology[J].Safety in Coal Mines,2011,42(2):96-98.