SLHT连续液相加氢技术的工业应用
|
摘要
中海油东方石化有限责任公司采用SLHT连续液相加氢技术,新建1套600kt/a柴油加氢装置。该技术采用配套新型柴油超深度加氢脱硫催化剂RS-2000、上流式反应器,并将热高压分离器整合进反应器,取消循环氢系统,使得工艺流程简化,投资省、占地少、耗能低。装置以直馏柴油和少量催化裂解柴油为混合原料,生产硫质量分数不大于10μg/g、氮质量分数不大于5μg/g、十六烷值60左右的满足国Ⅴ排放标准要求的超低硫柴油产品,装置能耗相比滴流床工艺降低25%,具有良好的经济效益。
A new-built 0.6 Mt/a of diesel hydrotreating unit in CNOOC Dongfang Petrochemical Co.,Ltd.adopted the continuous liquid phase hydrotreating technology SLHT jointly developed by SEI and RIPP.The technology used an ultra-deep hydrodesulfurization catalyst RS-2000 and adopted up-flow reactor and hot high pressure separator integrated into the reactor.The recycle hydrogen system was cut out.The new process scheme is simple,lower in investment and energy consumption,less land occupied.The ultra-low sulfur product with sulfur 10μg/g,nitrogen 5μg/g and cetane number about 60 is successfully produced using mixed feedstock of straight-run diesel and FCC diesel.The energy consumption of the unit is 25% less than the trickle bed,giving very good economic benefit.
A new-built 0.6 Mt/a of diesel hydrotreating unit in CNOOC Dongfang Petrochemical Co.,Ltd.adopted the continuous liquid phase hydrotreating technology SLHT jointly developed by SEI and RIPP.The technology used an ultra-deep hydrodesulfurization catalyst RS-2000 and adopted up-flow reactor and hot high pressure separator integrated into the reactor.The recycle hydrogen system was cut out.The new process scheme is simple,lower in investment and energy consumption,less land occupied.The ultra-low sulfur product with sulfur 10μg/g,nitrogen 5μg/g and cetane number about 60 is successfully produced using mixed feedstock of straight-run diesel and FCC diesel.The energy consumption of the unit is 25% less than the trickle bed,giving very good economic benefit.
引文
[1]修振东.海南炼化柴油质量升级的研究与实践[J].石油炼制与化工,2016,47(11):41-47
[2]穆海涛.适应柴油质量升级的催化剂运行分析及对策[J].石油炼制与化工,2015,46(9):31-37
[3]李大东.炼油工业:市场的变化与技术对策[J].石油学报(石油加工),2015,31(2):208-217
[4]孙明立.柴油加氢装置产品质量升级的措施[J].石油炼制与化工,2016,47(6):28-31
[5]高磊.催化裂化柴油加工路线选择及优化[J].石油炼制与化工,2017,48(7):64-69
[6]谢海群,冯忠伟.液相加氢技术应用现状分析[J].炼油与化工,2015,26(5):5-7
[7]刘凯祥,阮宇红,李浩.连续液相加氢技术在柴油加氢精制装置的应用[J].石油化工设计,2012,29(2):26-29
[2]穆海涛.适应柴油质量升级的催化剂运行分析及对策[J].石油炼制与化工,2015,46(9):31-37
[3]李大东.炼油工业:市场的变化与技术对策[J].石油学报(石油加工),2015,31(2):208-217
[4]孙明立.柴油加氢装置产品质量升级的措施[J].石油炼制与化工,2016,47(6):28-31
[5]高磊.催化裂化柴油加工路线选择及优化[J].石油炼制与化工,2017,48(7):64-69
[6]谢海群,冯忠伟.液相加氢技术应用现状分析[J].炼油与化工,2015,26(5):5-7
[7]刘凯祥,阮宇红,李浩.连续液相加氢技术在柴油加氢精制装置的应用[J].石油化工设计,2012,29(2):26-29