摘要
铝合金轮毂在旋压工艺制造过程中,旋压机的滚轮轴承会出现故障,为了诊断滚轮轴承故障,提出将小波和希尔伯特变换相结合的方法。通过分析采集信号,可准确地把滚轮轴承故障诊断出来,分析效果不受铝合金轮毂旋压毛坯厚度、粗糙度等其他因素影响。
In the spinning manufacturing process of the aluminum alloy wheel hub, faults would happen to the roller bearing of spinning machine. In order to diagnose roller bearing fault, the method by combining wavelet and Hilbert transformation has been put forward. Through analysis of the acquired signal, the fault has been accurately diagnosed. The analysis effect has not been affected by the spinning blank thickness, the roughness and the other factors of the aluminum alloy wheel hub.
引文
[1]席鹏翀,王强,张治民.LC4超高强度铝合金轮毂的成形工艺研究[J].锻压装备与制造技术,2007,42(5):70-72.
[2]孙爱军,任秋,吕金旗.锻造铝合金轮毂缺陷及检测方法的研究[J].锻压装备与制造技术,2013,48(1):69-71.
[3]张予宁,等.小波-包络分析在齿轮故障诊断中的应用[J].重型机械,2013,11(6):78-80.
[4]明安波,褚福磊,张炜.99滚动轴承故障特征提取的频谱自相关方法[J].机械工程学报,2012,10(19):65-70.
[5]冯华林.滑动轴承发热原因和解决方法的探讨,锻压装备与制造技术,2010.3:39-42.
[6]CHRYSAFIS C,ORTEGA A.Line based reduced memory wavelet image compression[J],IEEE Transactions on Image Processing,2000,9(3):378-389.
[7]Nikolaou N G,Antoniadis I A.Demodulation of vibration signals generated by defects in rolling element bearings using complex shifted Morlet wavelets[J],Mechanical Systems and Signal Processing,2002,16(4):677-694.
[8]孙良环.基于希尔伯特变换的扭振测量方法及其在齿轮故障诊断中的应用[D].太原市:太原理工大学,2005:763-788.