工业炸药试爆罐自动泄压装置的研究
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Study on automatic venting device of industrial explosive test jar
  • 作者:唐炜 ; 孟祥良
  • 英文作者:Tang wei;Meng Xiang-liang;Jiangxi yifeng guotai chemical Co.,LTD.;
  • 关键词:工业炸药 ; 试爆罐 ; 自动 ; 泄压装置 ; 抽气结构
  • 英文关键词:industrial explosive;;test jar;;automation;;venting device;;pumping structure
  • 中文刊名:MKBP
  • 英文刊名:Coal Mine Blasting
  • 机构:江西宜丰国泰化工有限责任公司;
  • 出版日期:2017-08-25
  • 出版单位:煤矿爆破
  • 年:2017
  • 期:No.122
  • 基金:江西宜丰国泰化工有限责任公司2016年科研项目,项目名称:试爆罐自动化泄爆装置研发,项目编号:T-KYLX-2016-003
  • 语种:中文;
  • 页:MKBP201704002
  • 页数:2
  • CN:04
  • ISSN:34-1137/TD
  • 分类号:8-9
摘要
工业炸药成品性能检测一般采用试爆罐装置,在炸药试爆时,试爆罐上多有泄压装置,当爆炸压力增大时就会顶开泄压装置,但在此过程中,炸药产生的废气便会四处扩散,从而造成有毒气体的排散,因此很不安全。本文研究一种试爆罐自动泄压装置,该装置泄压非常迅速,同时利用抽气结构将泄压过程中产生的气体最大限度抽走,避免污染环境,提高本质安全。
        The performance of industrial explosive products is usually measured by test jar,when the explosive is tested,there are many explosion venting devices on the test jar. when the explosion pressure increases, it will open the venting device,but during this process,exhaust gas from explosives will spread everywhere,which is not safe. In this paper,an automatic venting device of test jar is studied,the device releases pressure very rapidly,at the same time, the pumping structure is used to draw the gas out of test jar during the venting process to the limit,avoiding pollution of the environment and improving the intrinsic safety level.
引文
1江西省国防工业设计院.改性铵油生产线试爆罐结构设计说明书[M].2008
    2王志荣,周超,师喜林,蒋军成.连通容器内预混气体泄爆过程[J].化工学报,2011(01)
    3陈志军,胡传顺,张迎利.安全泄压装置的设计[J].当代化工,2004(06)
    4胡洋勇,颜事龙,郭子如,刘锋.工业炸药爆炸后有毒气体含量的测定及结果分析[J].火工品,2013(04)

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700