塑料异型材挤出定型模三维参数化设计方法
|
摘要
通过对塑料异型材挤出定型模二维设计的过程进行研究发现,定型模的结构设计和图纸审核花费大量的时间,对此,提出了塑料异型材挤出定型模的参数化设计方法。基于UG平台,以Visual Studio为开发工具,使用UG/Open和MFC技术开发出塑料异型材挤出定型模的参数化设计系统。用户可以通过参数化设计系统完成对定型模的三维设计,同时,参数化设计系统中加入干涉检查模块,对于定型模三维模型中干涉的部分,用户可以清楚地看出并进行修改,减少定型模图纸审核的时间。最后用户可以导出定型模的整切图和各个板块的结构图,减少定型模板块结构设计的时间。
The design of the calibrators of plastic profile extrusion and drawing review were found to waste a lot of time by researching the design process of the calibrators of plastic profile extrusion. So,the parametric design method of the calibrators of plastic profile extrusion was proposed. Based on UG platform,using Visual Studio as development tool,UG/Open and MFC technologies were used to develop the parametric design system of the calibrators of plastic profile extrusion. The user can complete there-dimensional design of calibrators by the parametric system. At the same time,the parts of the interference in the 3 D model of calibrators can be found and modified to reduce the time of drawing review by adding interference check module to the parametric system. At last,the user can export whole cut drawing of calibrators and the structure drawing of each slab to reduce the time of the structural design of calibrators.
The design of the calibrators of plastic profile extrusion and drawing review were found to waste a lot of time by researching the design process of the calibrators of plastic profile extrusion. So,the parametric design method of the calibrators of plastic profile extrusion was proposed. Based on UG platform,using Visual Studio as development tool,UG/Open and MFC technologies were used to develop the parametric design system of the calibrators of plastic profile extrusion. The user can complete there-dimensional design of calibrators by the parametric system. At the same time,the parts of the interference in the 3 D model of calibrators can be found and modified to reduce the time of drawing review by adding interference check module to the parametric system. At last,the user can export whole cut drawing of calibrators and the structure drawing of each slab to reduce the time of the structural design of calibrators.
引文
[1]杨忠久.塑料异型材配方调试方向、依据及基准[J].门窗,2011(2):43–49.Yang Zhongjiu.Plastic profile compound debugging direction,basis and benchmark[J].Doors&Windows,2011(2):43–49.
[2]荆圻,杨继忠.塑料型材挤出模的设计与调试[J].模具工业,2011(5):52–60.Jing Qi,Yang Jizhong.Design and test technology of plastic profile extrusion die[J].Die&Mould Industry,2011(5):52–60.
[3]李厚佳,张晓岩.三维CAD技术在注塑模设计中的应用研究[J].塑料科技,2012(12):72–74.Li Houjia,Zhang Xiaoyan.Study on application of threedimensional CAD technology in injection mold design[J].Plastics Science and Technology,2012(12):72–74.
[4]张桂侠.基于UG的注塑模CAD系统的研发与应用[J].模具技术,2009(1):42–45.Zhang Guixia.The research and application of the injection mold CAD system based on UG[J].Die&Technology,2009(1):42–45.
[5]李庆,黄志高,代丽,等.基于CAD/CAE集成的注塑模结构分析[J].华中科技大学学报:自然科学版,2012(3):104–107.Li Qing,Huang Zhigao,Dai Li,et al.Analysis of injection mold structure based on CAD/CAE integration[J].Journal of Huazhong University of Science and Technology:Natural Science Edition,2012(3):104–107.
[6]黄浪,唐红涛,郭顺生,等.塑料异型材挤出定型模CAD系统[J].塑料,2015(2):108–112.Huang Lang,Tang Hongtao,Guo Shunsheng,et al.Calibrators CAD system for plastic profile extrusion[J].Plastic,2015(2):108–112.
[7]马丽华.塑料挤出模CAD系统的研究[J].塑料工业,2017,45(2):75–77.Ma Lihua.Research of plastic extrusion CAD system[J].China Plastic Industry,2017,45(2):75–77.
[8]李力,唐红涛,郭顺生,等.塑料异型材挤出模头模架CAD系统研究[J].塑料工业,2015,43(3):37–41.Li Li,Tang Hongtao,Guo Shunsheng,et al.Research of extrusion die set CAD system for plastic profile[J].China Plastics Industry,2015,43(4):37–41.
[9]朱圆圆,祁文军,易挺.塑料异型材挤出模具生产技术简介及其发展方向[J].塑料制造,2008(8):60–63.Zhu Yuanyuan,Qi Wenjun,Yi Ting.Development and introduction of process technique about plastic[J].Plastics Manufacture,2008(8):60–63.
[10]张建雨,冯刚,张朝阁,等.我国塑料异型材挤出技术研究概况[J].工程塑料应用,2014,42(5):125–129.Zhang Jianyu,Feng Gang,Zhang Zhaoge,et al.Research review of plastic proifle extrusion technology in China[J].Engineering Plastics Application,2014,42(5):125–129.
[11]张良,刘雪红,唐红涛,等.塑料挤出模头流道结构CAD系统研究与应用[J].工程塑料应用,2015,43(7):77–82.Zhang Liang,Liu Xuehong,Tang Hongtao,et al.The research and application of plastic extrusion die head flow structure CAD system[J].Engineering Plastics Application,2015,43(7):77–82.
[12]胡延平,程哲,魏聪,等.塑料挤出模头CAD系统研究[J].模具工业,2017(11):9–12.Hu Yanping,Cheng Zhe,Wei Cong,et al.Research on CAD system of extrusion die head for plastics[J].Die&Mould Industry,2017(11):9–12.
[13]罗易彬,刘雪红,郭顺生,等.塑料异型材挤出模模头工艺内腔结构CAD智能设计方法研究[J].模具工业,2016(3):10–15.Luo Yibin,Liu Xuehong,Guo Shunsheng,et al.Research on the method of CAD intelligent design system of inner cavity structure of extrusion die for plastic profile[J].Die&Mould Industry,2016(3):10–15.
[14]肖建华,高延峰.微孔薄膜挤出模计算机辅助设计[J].塑料工业,2016,44(4):39–41.Xiao Jianhua,Gao Yanfeng.Computer-aided design for microcapillary film extrusion die[J].China Plastic Industry,2016,44(4):39–41.
[15]杨勇辉,崔一.CAE/CAD技术在塑料模具设计中的应用[J].工程塑料应用,2017,45(2):124–127.Yang Yonghui,Cui Yi.Application of CAE/CAD technology in designing of plastic mould[J].Engineering Plastics Application,2017,45(2):124–127.
[2]荆圻,杨继忠.塑料型材挤出模的设计与调试[J].模具工业,2011(5):52–60.Jing Qi,Yang Jizhong.Design and test technology of plastic profile extrusion die[J].Die&Mould Industry,2011(5):52–60.
[3]李厚佳,张晓岩.三维CAD技术在注塑模设计中的应用研究[J].塑料科技,2012(12):72–74.Li Houjia,Zhang Xiaoyan.Study on application of threedimensional CAD technology in injection mold design[J].Plastics Science and Technology,2012(12):72–74.
[4]张桂侠.基于UG的注塑模CAD系统的研发与应用[J].模具技术,2009(1):42–45.Zhang Guixia.The research and application of the injection mold CAD system based on UG[J].Die&Technology,2009(1):42–45.
[5]李庆,黄志高,代丽,等.基于CAD/CAE集成的注塑模结构分析[J].华中科技大学学报:自然科学版,2012(3):104–107.Li Qing,Huang Zhigao,Dai Li,et al.Analysis of injection mold structure based on CAD/CAE integration[J].Journal of Huazhong University of Science and Technology:Natural Science Edition,2012(3):104–107.
[6]黄浪,唐红涛,郭顺生,等.塑料异型材挤出定型模CAD系统[J].塑料,2015(2):108–112.Huang Lang,Tang Hongtao,Guo Shunsheng,et al.Calibrators CAD system for plastic profile extrusion[J].Plastic,2015(2):108–112.
[7]马丽华.塑料挤出模CAD系统的研究[J].塑料工业,2017,45(2):75–77.Ma Lihua.Research of plastic extrusion CAD system[J].China Plastic Industry,2017,45(2):75–77.
[8]李力,唐红涛,郭顺生,等.塑料异型材挤出模头模架CAD系统研究[J].塑料工业,2015,43(3):37–41.Li Li,Tang Hongtao,Guo Shunsheng,et al.Research of extrusion die set CAD system for plastic profile[J].China Plastics Industry,2015,43(4):37–41.
[9]朱圆圆,祁文军,易挺.塑料异型材挤出模具生产技术简介及其发展方向[J].塑料制造,2008(8):60–63.Zhu Yuanyuan,Qi Wenjun,Yi Ting.Development and introduction of process technique about plastic[J].Plastics Manufacture,2008(8):60–63.
[10]张建雨,冯刚,张朝阁,等.我国塑料异型材挤出技术研究概况[J].工程塑料应用,2014,42(5):125–129.Zhang Jianyu,Feng Gang,Zhang Zhaoge,et al.Research review of plastic proifle extrusion technology in China[J].Engineering Plastics Application,2014,42(5):125–129.
[11]张良,刘雪红,唐红涛,等.塑料挤出模头流道结构CAD系统研究与应用[J].工程塑料应用,2015,43(7):77–82.Zhang Liang,Liu Xuehong,Tang Hongtao,et al.The research and application of plastic extrusion die head flow structure CAD system[J].Engineering Plastics Application,2015,43(7):77–82.
[12]胡延平,程哲,魏聪,等.塑料挤出模头CAD系统研究[J].模具工业,2017(11):9–12.Hu Yanping,Cheng Zhe,Wei Cong,et al.Research on CAD system of extrusion die head for plastics[J].Die&Mould Industry,2017(11):9–12.
[13]罗易彬,刘雪红,郭顺生,等.塑料异型材挤出模模头工艺内腔结构CAD智能设计方法研究[J].模具工业,2016(3):10–15.Luo Yibin,Liu Xuehong,Guo Shunsheng,et al.Research on the method of CAD intelligent design system of inner cavity structure of extrusion die for plastic profile[J].Die&Mould Industry,2016(3):10–15.
[14]肖建华,高延峰.微孔薄膜挤出模计算机辅助设计[J].塑料工业,2016,44(4):39–41.Xiao Jianhua,Gao Yanfeng.Computer-aided design for microcapillary film extrusion die[J].China Plastic Industry,2016,44(4):39–41.
[15]杨勇辉,崔一.CAE/CAD技术在塑料模具设计中的应用[J].工程塑料应用,2017,45(2):124–127.Yang Yonghui,Cui Yi.Application of CAE/CAD technology in designing of plastic mould[J].Engineering Plastics Application,2017,45(2):124–127.