摘要
针对水量电动连续调节阀在管网中的动态调节特性描述不准确等问题,基于调节阀前后压降关于流量及阀门流阻系数的数学模型,提出了调节阀导纳的定义。通过测量不同开度下调节阀前后压差及流量,建立了调节阀导纳关于开度的数学回归方程。基于该方程对其理想流量特性及工作流量特性进行了量化描述。
In view of the inaccurate description problem of dynamic regulation characteristics of electric water consecutive regulating valves in pipeline network,based on the flow rate and valve resistance coefficient mathematical model of the pressure drop before and after regulating valves,puts forward a definition of the regulating valve admittance.Tests the differential pressure before and after regulating valves and flow rate at different opening,and establishes the opening mathematical regression equation of the valve admittance.Based on the equation,quantitatively presents the ideal flow characteristics and working flow characteristics.
引文
[1] 龚飞鹰, 刘传君, 何衍庆. 控制阀实用手册[M]. 北京: 化学工业出版社, 2015:101- 134
[2] ELLDAKLI F, SOLIMAN M. Optimum design for new gas lift valveseat[J]. Journal of Petroleum Science and Engineering, 2017, 149: 456- 464
[3] SONG X G, WANG L, BAEK S H, et al. Multidisciplinary optimization of a butterflyvalve[G]//ISA Transactions, 2009, 48(3): 370- 377
[4] 徐得涛. 基于 CFD 的蝶阀结构优化与多场耦合分析[D]. 沈阳: 东北大学, 2011:13- 15
[5] 潘康. 控制蝶阀调节特性的研究[D]. 杭州: 浙江大学, 2008:56- 61
[6] 曹文斌. 调节阀流量特性及动态性能研究[D]. 兰州: 兰州理工大学, 2013:34- 45
[7] 杨丽. 基于 CFD 技术的调节阀流动特性的研究[D]. 北京: 北方工业大学, 2009:12- 16
[8] LISOWSKI E, FILO G. Analysis of a proportional control valve flow coefficient with the usage of a CFD method[J]. Flow Measurement and Instrumentation, 2017,53:269- 278
[9] WU D, LI S, WU P. CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system[J]. Energy Conversion and Management, 2015, 101: 658- 665
[10] 张伟政. 调节阀内部流场的数值模拟及优化分析[D]. 兰州: 兰州理工大学, 2007:23- 25