立式铣床与测力仪连接法兰研究与设计
|
摘要
为了能够进行基于Kislter9272测力仪的切削力测量,设计了一种用于连接K11-130三爪卡盘和Kislter9272测力仪的法兰。首先利用三维建模软件对三爪卡盘和Kistler9272测力仪分别建模;然后设计了连接法兰的结构,并进行了虚拟装配;最后进行了验证性实验,验证了该连接法兰的有效性和准确性。
In order to measure cutting force based on Kislter 9272 dynamometer, a flange structure for connecting K11-130 three-jaw chuck and Kislter 9272 dynamometer is designed. Firstly, three-jaw chuck and Kistler 9272 dynamometer are modeled by 3D modeling software. Then, the structure of connecting flange is designed and virtual assembly is carried out. Finally, the validity and accuracy of the connecting flange are verified by the experimental results.
In order to measure cutting force based on Kislter 9272 dynamometer, a flange structure for connecting K11-130 three-jaw chuck and Kislter 9272 dynamometer is designed. Firstly, three-jaw chuck and Kistler 9272 dynamometer are modeled by 3D modeling software. Then, the structure of connecting flange is designed and virtual assembly is carried out. Finally, the validity and accuracy of the connecting flange are verified by the experimental results.
引文
[1] 朱坚民,王健,张统超,等.基于刀具振动位移的动态铣削力测量方法[J].仪器仪表学报,2014,35(12):2772-2782.
[2] PARK S S,ALTINTAS Y.Dynamic compensation of spindle integrated force sensors with kalman filter[J].Journal of Dynamic Systems,Measurement and Control,2004,126(3):443-452.
[3] 周晓辉,姚俭,吴天魁.基于梯形直觉模糊数的TOPSIS多属性决策方法[J].上海理工大学学报,2014,36(3):281-286.
[4] 刘晓龙.基于驱动电流的铣削力高精度实时估计方法研究[D].武汉:华中科技大学,2013.
[5] 王素娟,陈新度,李克天.PSD在超精密加工实验数据分析的应用[J].实验技术与管理,2015,32(5):75-81.
[6] 柳青,王进峰,赵久兰,等.车削SiCp/Al复合材料切削力预测模型研究[J].中国工程机械学报,2018,16(3):24-28.
[7] 刘刚,张恒,王亚飞,周兰,等.碳纤维增强复合材料螺旋铣孔切削力及加工质量研究[J].复合材料学报,2014,31(5):1292-1299.
[8] 王进峰,储开宇,赵久兰,等.SiC_p/Al复合材料切削仿真及实验研究[J].人工晶体学报,2016,45(7):1756-1764.
[9] 任凤章,张旦闻,吴锐,等.材料加工性能评价中的切削力测量问题的实验研究[J].材料热处理学报,2014,35(增刊1):72-76.
[10] 王进峰,权凯军,刘欢,等.用于高速车床刀塔和切削力测力仪的实验装置[J].实验技术与管理,2018,35(8):101-104.
[11] 徐旭松,刘战锋,朱林,等.一种深孔钻削切削力测量装置[J].组合机床与自动化加工技术,2014(12):113-114,118.
[12] 赵玉龙,李莹雪,费继友,等.固定式三向铣削测力仪的研究[J].振动.测试与诊断,2017,37(4):641-647,835.
[2] PARK S S,ALTINTAS Y.Dynamic compensation of spindle integrated force sensors with kalman filter[J].Journal of Dynamic Systems,Measurement and Control,2004,126(3):443-452.
[3] 周晓辉,姚俭,吴天魁.基于梯形直觉模糊数的TOPSIS多属性决策方法[J].上海理工大学学报,2014,36(3):281-286.
[4] 刘晓龙.基于驱动电流的铣削力高精度实时估计方法研究[D].武汉:华中科技大学,2013.
[5] 王素娟,陈新度,李克天.PSD在超精密加工实验数据分析的应用[J].实验技术与管理,2015,32(5):75-81.
[6] 柳青,王进峰,赵久兰,等.车削SiCp/Al复合材料切削力预测模型研究[J].中国工程机械学报,2018,16(3):24-28.
[7] 刘刚,张恒,王亚飞,周兰,等.碳纤维增强复合材料螺旋铣孔切削力及加工质量研究[J].复合材料学报,2014,31(5):1292-1299.
[8] 王进峰,储开宇,赵久兰,等.SiC_p/Al复合材料切削仿真及实验研究[J].人工晶体学报,2016,45(7):1756-1764.
[9] 任凤章,张旦闻,吴锐,等.材料加工性能评价中的切削力测量问题的实验研究[J].材料热处理学报,2014,35(增刊1):72-76.
[10] 王进峰,权凯军,刘欢,等.用于高速车床刀塔和切削力测力仪的实验装置[J].实验技术与管理,2018,35(8):101-104.
[11] 徐旭松,刘战锋,朱林,等.一种深孔钻削切削力测量装置[J].组合机床与自动化加工技术,2014(12):113-114,118.
[12] 赵玉龙,李莹雪,费继友,等.固定式三向铣削测力仪的研究[J].振动.测试与诊断,2017,37(4):641-647,835.