丙烯酸泡棉压敏胶耐环境性能测试分析
|
摘要
汽车外饰件用压敏胶在选用过程中需要进行大量试验。为了优化筛选过程,分析了压敏胶粘附及失效的原理,采用涂漆钢板和ABS板模拟粘接对手件,比较了各种环境条件下压敏胶带经剥离强度和剪切强度试验后的性能,得出寒冷环境条件下压敏胶老化失效概率更高。此外,对压敏胶的考核也可从对接头的破坏形式方面进行分析。该方法可用于指导压敏胶筛选工作,提高筛选效率,减少试验工作量。
Pressure sensitive adhesives(PSAs) for automotive exterior trim parts need to undergo a large number of tests in the selection process. In order to optimize the screening process, the principle of adhesion and failure of PSAs was analyzed.Painted steel plate and ABS plate were used to simulate the parts that need to be bonded. The performances of PSAs tape after peel strength and shear strength tests under various environmental conditions were compared. It was concluded that the aging failure probability of PSAs was higher under cold environment conditions. In addition, the assessment of PSAs can also be analyzed from the damage form of the joint. The method can be used to guide the PSAs screening, improve screening efficiency and reduce test workload.
Pressure sensitive adhesives(PSAs) for automotive exterior trim parts need to undergo a large number of tests in the selection process. In order to optimize the screening process, the principle of adhesion and failure of PSAs was analyzed.Painted steel plate and ABS plate were used to simulate the parts that need to be bonded. The performances of PSAs tape after peel strength and shear strength tests under various environmental conditions were compared. It was concluded that the aging failure probability of PSAs was higher under cold environment conditions. In addition, the assessment of PSAs can also be analyzed from the damage form of the joint. The method can be used to guide the PSAs screening, improve screening efficiency and reduce test workload.
引文
[1]赵海龙.丙烯酸泡棉胶带在汽车上的应用[J].工艺与装备,2015(3):51.
[2]方潇勇.丙烯酸泡棉胶带在汽车结构优化方面的应用[J].汽车工程师,2011(2):55-57.
[3]杨玉昆,吕凤亭.压敏胶制品技术手册[M].北京:化学工业出版社,2004.
[4]邱瑾.极寒条件下压敏胶失效的原因及其解决方案[J].应用技术,2010(2):70.
[5]张向宇.胶黏剂分析与测试技术[M].北京:化学工业出版社,2004:11.
[2]方潇勇.丙烯酸泡棉胶带在汽车结构优化方面的应用[J].汽车工程师,2011(2):55-57.
[3]杨玉昆,吕凤亭.压敏胶制品技术手册[M].北京:化学工业出版社,2004.
[4]邱瑾.极寒条件下压敏胶失效的原因及其解决方案[J].应用技术,2010(2):70.
[5]张向宇.胶黏剂分析与测试技术[M].北京:化学工业出版社,2004:11.