CADI研究进展及展望
|
摘要
详细阐述了CADI近年来的研究进展,主要涉及Mn含量、Cr含量、B含量和高温预处理、热处理工艺对CADI微观组织和性能的影响及其磨损机理,最后提出CADI将来的发展趋势,耐磨机理、标准的制订、高效低成本等温淬火设备以及高效稳定的分级淬火工艺将是研究重点。
The research advances of CADI in recent years was introduced in details, which includes the influence of Mn,Cr and B contents, high temperature pretreatment process,heat treatment process on microstructure and properties of CADI and wear mechanism. In the end, we get the trends of CADI in the future, and the wear mechanisms, establishing the related standard, developing high-efficient and low-cost isothermal quenching equipment as well as efficient and stable stepped quenching processing will be the priority.
The research advances of CADI in recent years was introduced in details, which includes the influence of Mn,Cr and B contents, high temperature pretreatment process,heat treatment process on microstructure and properties of CADI and wear mechanism. In the end, we get the trends of CADI in the future, and the wear mechanisms, establishing the related standard, developing high-efficient and low-cost isothermal quenching equipment as well as efficient and stable stepped quenching processing will be the priority.
引文
[1]邹斯澄,朱振华.奥氏体一贝氏体球墨铸铁[J].现代铸铁,1990,(3):46-55.
[2]叶学贤,ADI的性能及国内的应用[J].中国铸造装备与技术,2007,(5):49-60.
[3]Hayrynen K L,Brandenberg K R.Carbidic austempered ductile iron(CADI)—the new wear material[J].AFS Trans,2003,(111):845-850.
[4]王怀林.CADI在农机犁桦上的应用[C].第四届全国等温淬火球铁技术研讨会论文集,苏州,2006.12.
[5]刘金海,叶学贤,张会友,等.ADI和CADI在冶金矿山等行业中的应用及前景[J].现代铸铁,2008,(4):26-30.
[6]戚元霞.挖掘机斗齿CADI新材料试制研究实验[D].南宁:广西大学,2012:1-54.
[7]Jinhai Liu,Guolu Li,Xuebo Zhao,et al.Effect of austempering temperature on microstructure and properties of carbidic austempered ductile iron[J].Advanced materials research,2011,(284):1085-1 088.
[8]A.A.Nofal,L.Jekova.Novel processing techniques and applications of austempered ductile iron(review)[J].Journal of the University of Chemical Technology and Metallurgy,2009,44(3):213-228.
[9]李路,锰对含碳化物等温淬火球墨铸铁组织及性能的影响[D].郑州:郑州大学,2013:1-56.
[10]胡勇,饶丽,陈国香.Mn、Cu对球墨铸铁组织性能的影响[J].兵器材料与科学,2012,35(4):1-3.
[11]公永建,张智源,孙玉福.锰对CADI组织及性能的影响[J].铸造技术,2015,36:1739-1741.
[12]徐杨,施焕儒,简建明,刘俊友,抗磨贝氏体球墨铸铁的研究与应用[J].材料热处理学报,2008,29(4):131-134.
[13]赵伯播,严有为.高锰奥贝球铁的生产试验[J].铸造,1994,(7):22-25
[14]张婷,孙玉福,赵靖宇,等.铬对CADI组织及性能的影响[J].2009,58(11):1154-1157.
[15]S.Laino,J.A.Sikora,R.C.Dommarco,Development of wear resistant carbidic austempered ductile iron(CADI)[J].Wear,2008,265(1-2):1–7
[16]S.Laino,J.A.Sikora,R.C.Dommarco,Influence of Chemnical Composition and Solidification Rate on the Abration and Impact Properties of CADI[J].ISIJ International,2009,49(8):1239-1245.
[17]S.Laino,J.A.Sikora,R.C.Dommarco.Wear Behavior of CADI Operating Under Different Tribosystems[J].ISIJ International,2010,50(3):418-424.
[18]公永建,邓想,孙玉福.硼对C AD I组织及性能的影响[J].铸造,2014,63(12):1208-1211.
[19]孙玉福,汤文博.硼对贝-马抗磨球铁组织及性能的影响[J].现代铸铁,2002,(3):18-21
[20]彭云成,刘金海,李国禄等.硼对等温淬火球墨铸铁组织和性能的影响[C].天津市铸造学会成立50周年庆典暨铸造技术交流会,2011年9月,天津.
[21]Yun-Cheng Peng,Hui-Jin Jin,Jin-Hai Liu.Effect of boron on the microstructure and mechanical properties of carbidic austempered ductile iron[J].Materials Science and Engineering:A,2011,529:321-325.
[22]陈传胜,刘建升,祖方遒.高温预处理及等温淬火工艺对含碳球墨铸铁力学性能的影响[J].金属热处理,2016,41(4):161-164.
[23]张其飞,含碳化物等温淬火球铁(CADI)热处理工艺及组织和性能的研究[D].合肥:合肥工业大学,2012:1-47.
[24]曾艺成.等温淬火球墨铸铁(ADI)现状及发展前景[J].中国铸造装备与技术,2007,(4):60-66.
[25]胡小锋,闫德胜,戎利建,CADI材料的热处理优化及其对耐磨性能的影响[J].材料热处理学报,2013,34:108-113.
[26]Ajay Likhite,Prashant Parhad,Effect of Austenitization Temperature on Wear Behavior of Carbidic Austempered Ductile Iron(CADI)[J].International Scholarly and Scientific Research&Innovation,2014,8(6):510-512.
[27]刘建升,热处理工艺对含碳化物等温淬火球铁性能的影响[D].合肥:合肥工业大学,2012.
[28]孙玉福,张婷,赵靖宇,等温淬火温度对CADI组织及性能的影响[J].铸造,2011,60(1):28-31.
[29]李继林,李莉平,高萌.等温淬火时间对贝氏体球铁组织和性能的影响[J].铸造技术,2014,35(5):920-923.
[30]徐杨,周世康,分级淬火奥贝球铁的组织与性能[J].中国农业大学学报,1997,2(2):28-31.
[31]刘金海,吕翠花,王昆军,等.热处理工艺对球铁磨球性能的影响[A].2013中国铸造活动周论文集[C].沈阳:全国铸造学会,2013:329-332.
[32]李国禄,郝晓燕,刘金海,等.含碳化物等温淬火球铁腐蚀磨损特性的研究[C].2013中国铸造活动周论文集,2013.
[33]刘金海,王昆军,李国禄,等.国内外CADI的发展现状与趋势[J].现代铸铁,2015,6:40-45.
[2]叶学贤,ADI的性能及国内的应用[J].中国铸造装备与技术,2007,(5):49-60.
[3]Hayrynen K L,Brandenberg K R.Carbidic austempered ductile iron(CADI)—the new wear material[J].AFS Trans,2003,(111):845-850.
[4]王怀林.CADI在农机犁桦上的应用[C].第四届全国等温淬火球铁技术研讨会论文集,苏州,2006.12.
[5]刘金海,叶学贤,张会友,等.ADI和CADI在冶金矿山等行业中的应用及前景[J].现代铸铁,2008,(4):26-30.
[6]戚元霞.挖掘机斗齿CADI新材料试制研究实验[D].南宁:广西大学,2012:1-54.
[7]Jinhai Liu,Guolu Li,Xuebo Zhao,et al.Effect of austempering temperature on microstructure and properties of carbidic austempered ductile iron[J].Advanced materials research,2011,(284):1085-1 088.
[8]A.A.Nofal,L.Jekova.Novel processing techniques and applications of austempered ductile iron(review)[J].Journal of the University of Chemical Technology and Metallurgy,2009,44(3):213-228.
[9]李路,锰对含碳化物等温淬火球墨铸铁组织及性能的影响[D].郑州:郑州大学,2013:1-56.
[10]胡勇,饶丽,陈国香.Mn、Cu对球墨铸铁组织性能的影响[J].兵器材料与科学,2012,35(4):1-3.
[11]公永建,张智源,孙玉福.锰对CADI组织及性能的影响[J].铸造技术,2015,36:1739-1741.
[12]徐杨,施焕儒,简建明,刘俊友,抗磨贝氏体球墨铸铁的研究与应用[J].材料热处理学报,2008,29(4):131-134.
[13]赵伯播,严有为.高锰奥贝球铁的生产试验[J].铸造,1994,(7):22-25
[14]张婷,孙玉福,赵靖宇,等.铬对CADI组织及性能的影响[J].2009,58(11):1154-1157.
[15]S.Laino,J.A.Sikora,R.C.Dommarco,Development of wear resistant carbidic austempered ductile iron(CADI)[J].Wear,2008,265(1-2):1–7
[16]S.Laino,J.A.Sikora,R.C.Dommarco,Influence of Chemnical Composition and Solidification Rate on the Abration and Impact Properties of CADI[J].ISIJ International,2009,49(8):1239-1245.
[17]S.Laino,J.A.Sikora,R.C.Dommarco.Wear Behavior of CADI Operating Under Different Tribosystems[J].ISIJ International,2010,50(3):418-424.
[18]公永建,邓想,孙玉福.硼对C AD I组织及性能的影响[J].铸造,2014,63(12):1208-1211.
[19]孙玉福,汤文博.硼对贝-马抗磨球铁组织及性能的影响[J].现代铸铁,2002,(3):18-21
[20]彭云成,刘金海,李国禄等.硼对等温淬火球墨铸铁组织和性能的影响[C].天津市铸造学会成立50周年庆典暨铸造技术交流会,2011年9月,天津.
[21]Yun-Cheng Peng,Hui-Jin Jin,Jin-Hai Liu.Effect of boron on the microstructure and mechanical properties of carbidic austempered ductile iron[J].Materials Science and Engineering:A,2011,529:321-325.
[22]陈传胜,刘建升,祖方遒.高温预处理及等温淬火工艺对含碳球墨铸铁力学性能的影响[J].金属热处理,2016,41(4):161-164.
[23]张其飞,含碳化物等温淬火球铁(CADI)热处理工艺及组织和性能的研究[D].合肥:合肥工业大学,2012:1-47.
[24]曾艺成.等温淬火球墨铸铁(ADI)现状及发展前景[J].中国铸造装备与技术,2007,(4):60-66.
[25]胡小锋,闫德胜,戎利建,CADI材料的热处理优化及其对耐磨性能的影响[J].材料热处理学报,2013,34:108-113.
[26]Ajay Likhite,Prashant Parhad,Effect of Austenitization Temperature on Wear Behavior of Carbidic Austempered Ductile Iron(CADI)[J].International Scholarly and Scientific Research&Innovation,2014,8(6):510-512.
[27]刘建升,热处理工艺对含碳化物等温淬火球铁性能的影响[D].合肥:合肥工业大学,2012.
[28]孙玉福,张婷,赵靖宇,等温淬火温度对CADI组织及性能的影响[J].铸造,2011,60(1):28-31.
[29]李继林,李莉平,高萌.等温淬火时间对贝氏体球铁组织和性能的影响[J].铸造技术,2014,35(5):920-923.
[30]徐杨,周世康,分级淬火奥贝球铁的组织与性能[J].中国农业大学学报,1997,2(2):28-31.
[31]刘金海,吕翠花,王昆军,等.热处理工艺对球铁磨球性能的影响[A].2013中国铸造活动周论文集[C].沈阳:全国铸造学会,2013:329-332.
[32]李国禄,郝晓燕,刘金海,等.含碳化物等温淬火球铁腐蚀磨损特性的研究[C].2013中国铸造活动周论文集,2013.
[33]刘金海,王昆军,李国禄,等.国内外CADI的发展现状与趋势[J].现代铸铁,2015,6:40-45.