摘要
热成形模实际生产过程中成形的制件容易出现缺陷问题,分析了制件缺陷的产生机理,从镶件材质选择和镶件表面处理2个方面找到了合理的解决方案,为热成形制件的缺陷问题提供了解决思路及方法。
The galling problem of hot forming die was easily to occur in the actual production process, the mechanism of galling problems was analyzed. A reasonable solution was put forward in the aspect of the material selection and surface treatment of insert, which povided a thinking way and method to solve the galling problems of hot forming parts.
引文
[1]孙胜伟.轿车车身覆盖件冲压缺陷问题分析及对策[J].汽车工艺与材料,2011(12):1-4.
[2]侯英岢,张卫刚,于忠奇,等.模具硬度对高强度钢板缺陷缺陷的影响规律研究[J].塑性工程学报,2008(6):43-47.
[3]梁科,张松奇.模具硬度对缺陷缺陷的影响[J].机械工程师,2016(5):262.
[4]鲜光斌,罗琳,王业红,等.高强度钢板汽车纵梁缺陷常见原因分析及处理措施[J].模具工业,2013,39(6):41-44.
[5]周朝政,孔德军,袁锋严,等.冷作模具钢表面TD处理强化技术[J].模具工业,2010,36(4):63-67.