摘要
为了研究连铸坯表层夹杂物在轧制过程中的演变行为,对板坯表层线缺陷进行分析发现,缺陷距表层几十微米,宽度约为200μm,对其内物质进行能谱分析,发现有钠、钾元素,说明该缺陷可能是由于结晶器流场不合理等原因造成保护渣卷渣。通过建立连铸板坯表层夹杂物轧制过程有限元模型,对连铸坯头部、尾部不同位置夹杂物轧制过程中的演变行为进行了分析。结果表明,随着轧制道次的进行,夹杂物周边出现裂纹,并且随着轧制过程的进行,夹杂物周边的裂纹越来越大。轧件头部、尾部夹杂物逐渐向轧件表面移动,距离表层越近的夹杂物越容易迁移到轧件表面,而深度相同、水平位置不同的夹杂物,距轧件边缘距离越远,在轧制过程中越容易迁移到轧件表面。
In order to study the evolution behavior of slab surface inclusion during rolling process.By analysis of the line defect on the surface of the slab,it was found that the defect was about tens of microns away from the surface and the width was about 200μm.Energy spectrum analysis showed that Na and K elements were found in the inner material,indicating that the defect might be caused by slag entrapment due to the irrationality flow field of mold.The evolution behavior of inclusions at different positions of the head and trial slab in the rolling process was investigated by establishing the finite-element simulation of surface inclusion in the rolling process of continuous casting slab.Results showed that there were cracks around inclusion and these cracks grew with rolling pass.Inclusions in the head and trail slab migrated to the surface of the slab,and the closer the inclusions were to the surface,the easier they would migrate to the slab surface.With the same depth and different horizontal position,as the inclusions were farther away from the slab edge,they were more likely to migrate to the slab surface.
引文
[1]曾建华,李桂军,杨素波,等.低碱度高结晶率连铸保护渣的研究与应用[J].钢铁,2004,39(6):17.
[2]Fady M.Numerical study of steady turbulent flow through bifurcated nozzles in continuous casting[J].Metallurgical and Materials Transactions B,1995,26(1):749.
[3]Toshio T.Influence of casting conditions on molten steel flow in continuous casting mold at high speed casting of slabs[J].Iron and Steel,1993,79(5):576.
[4]万晓光.连铸板坯结晶器浸入式水口试验研究[J].钢铁,2000,35(9):20.
[5]陆巧彤,杨荣光,王新华,等.板坯连铸结晶器保护渣卷渣及其影响因素的研究[J].钢铁,2006,41(7):29.
[6]张宁,雷洪,刘承军,等.连铸结晶器内液面波动及卷渣行为的物理模型研究[J].连铸,2010(9):30.
[7]袁方明,王新华,刘秀梅,等.IF钢连铸板坯表面夹渣缺陷的研究[J].连铸,2004(6):32.
[8]吴晓燕,朱立光,梅国宏,等.钢板表面翘皮缺陷的特征与成因分析[J].热加工工艺,2017,46(11):238.
[9]单庆林,贾刘兵,彭国仲,等.超低碳钢热轧板卷渣缺陷研究[J].连铸,2016(4):54.
[10]张良进,王纪元.热轧过程中温度对MnO-Al2O3-SiO2夹杂物变形行为影响[J].中国冶金,2018,28(8):22.
[11]张宏亮,冯光宏.中厚板轧制过程夹杂物的有限元分析[J].材料热处理,2011,40(12):41.
[12]续飞飞,程树森.冷轧过程轧板内圆形夹杂物变形[J].中国冶金,2014,24(7):36.
[13]黄华贵,杜凤山,张芳.大型支承辊锻件内部夹杂性缺陷形成机理的FEM分析[J].中国机械工程,2009,20(4):477.
[14]熊伟,彭其春,范丹萍,等.低碳铝镇静钢连铸头坯夹杂物[J].中国冶金,2014,24(5):14.
[15]陈方,刘建华,王振,等.高级别船板钢轧制过程夹杂物的行为研究[J].钢铁研究学报,2013,25(7):42.
[16]YU Hai-liang,LIU Xiang-hua,LI Xin-wen.Analysis of inclusion deformation and crack generation during rolling with a super-thin layer by FEM[J].Materials Letters,2008,62(10/11):1595.