摘要
针对大功率充电车辆插座故障率日益增高的问题,分析故障来源及评估合理的解决方案和预防措施,并提出进一步改进的方向。
Aiming at the problem of the failure rate increasing for high power charging vehicle inlet,this paper analyzes the failure sources,evaluates the reasonable solutions and preventive measures,and puts forward the direction of further improvement.
引文
[1]全国汽车标准化委员会.电动汽车术语:GB/T 19596—2017[S].北京:中国标准出版社,2018:23.
[2]全国汽车标准化技术委员会.电动汽车传导充电用连接装置第2部分:交流充电接口:GB/T 20234.2—2015[S].北京:中国标准出版社,2016:1.
[3]全国汽车标准化技术委员会.电动汽车传导充电用连接装置第3部分:直流充电接口:GB/T 20234.3—2015[S].北京:中国标准出版社,2016:1.
[4]全国汽车标准化技术委员会.电动汽车传导充电用连接装置第1部分:通用要求:GB/T 20234.1—2015[S].北京:中国标准出版社,2016:9.
[5]全国汽车标准化技术委员会.电动汽车传导充电系统第1部分:通用要求:GB/T 18487.1—2015[S].北京:中国标准出版社,2016:13.
[6]李志萍.电动汽车传导式充电接口关键技术研究[D].成都:电子科技大学,2014.
[7]许军,李坤.电接触的接触电阻研究[J].电工材料,2011(1):10-13.
[8]黄健峰.线束端子压接工艺的研究与可靠性分析[D].北京:北京邮电大学,2016.
[9]IEC. SurfaceVehicle standard:J1772:SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler[S].SAE international,2017:89.
[10]WILLIAM H. ABBOTT. The Development and Performance Characteristics of Mixed Flowing Gas Test Environment[J].Hybrids and manufacturing technology,1988(1):22.
[11]陈笃廉.一种纯电动客车用弓式充电系统[J].研究与探索,2017(3):35-38.
[12]李忠东.瑞士ABB电动车快速充电[J].轻型汽车技术,2018(7):41-46.