摘要
以最大倾斜角度为6.5°、最高行驶速度为50 km/h的悬挂式单轨车辆为例,对悬挂式单轨交通线路的技术标准进行了研究。首先分析了悬挂式单轨车辆区别于传统钢轮钢轨车辆的受力特性,在此基础上,以悬挂式单轨车辆最大倾斜角度、最高行驶速度、允许的未被平衡离心加速度为参数,提出了悬挂式单轨交通线路最小圆曲线半径的计算方法,计算了不同速度条件下的最小圆曲线半径;提出了基于列车倾斜时变率和未被平衡离心加速度时变率的缓和曲线长度分段计算理论和方法,计算了不同曲线半径、不同行驶速度下的最小缓和曲线长度;提出了悬挂式单轨交通线路的最大坡度、竖曲线半径和最小坡段长度等控制指标。
Taken the suspended monorail vehicle whose maximumtile angle is 6. 5° and maximumspeed is 50 km/h as an example,the technical standards for suspended monorail line were studied in this paper. The force characteristics of suspended monorail vehicle different fromtraditional rail transit vehicle were analyzed firstly.O n this basis,the results as follows were obtained. With the maximumtitle angle,maximumspeed and allowed unbalanced centrifugal acceleration of the train as parameters,the calculation method of the minimumcurve radius was proposed and the minimumcurve radiuses under different speeds were calculated. Based on the time-changing rate of train' s title angle and train's unbalanced centrifugal acceleration,the segmented calculation theory and method of transition curve length were proposed,and the mininumtransition curve length under different curve radiuses and speeds were calculated using the same method.The maximumslope angle,radius of vertical curve and minimumslope length of the suspended monorail line were proposed.
引文
[1]肖云霞,王月明,杨东晓,等.悬挂式单轨直线轨道梁结构优化设计探讨[J].钢结构,2015,30(4):68-69.
[2]蒋咏志,王月明,谢倩.一种悬挂式单轨转向架结构方案及分析[J].机车电传动,2015(6):56-59.
[3]胡燚斌,肖杰灵,林红松,等.悬挂式单轨交通系统曲线段合理轨距研究[J].铁道建筑,2016,56(12):86-89.
[4]潘西湘.悬挂式单轨系统轨道梁结构优化设计研究[D].成都:西南交通大学,2014.
[5]李天一.具有一系悬挂的悬挂式单轨车辆悬挂参数分析及优化[D].成都:西南交通大学,2015.
[6]中华人民共和国住房和城乡建设部,中华人民共和国国家质量监督检验检疫总局.GB 50157—2013地铁设计规范[S].北京:中国建筑工业出版社,2013.
[7]中华人民共和国国家质量监督检验检疫总局,中华人民共和国建设部.GB 50090—2006铁路线路设计规范[S].北京:中国计划出版社,2006.
[8]中华人民共和国住房和城乡建设部,中华人民共和国国家质量监督检验检疫总局.GB 50458—2008跨座式单轨交通设计规范[S].北京:中国建筑工业出版社,2008.