摘要
通过分析固定轴式和行星齿轮式机电耦合系统,提出一种新型动力耦合装置动力传动结构,确定齿轮啮合参数。运用UG NX8.0进行参数化建模、装配,并导入ADAMS中进行运动学仿真。将仿真结果与理论计算值进行对比,结果表明误差在合理范围内,验证了动力耦合装置设计的合理性与虚拟样机模型的可信性。
By analyzing the fixed shaft and planetary gear electromechanical coupling systems, a new power transmission scheme of dynamic coupling device is put forward to determine gear meshing parameters. The parameterized modeling and assembly are completed by UG NX8.0, then the model is introduced into ADAMS for kinematics simulation. The simulation results are compared with the theoretical values, and the results show that the error is within a reasonable range. The results verify the rationality of the design of dynamic coupling device and credibility of virtual prototype model.
引文
[1]杨伟斌,陈全世,田光宇,等.插电式混合动力汽车换挡规律及转矩分配策略[J].机械工程学报,2013,49(14):91-98.
[2]牛冠男,鲁聪达,吴建华.基于ADAMS的变速箱传动系统动力学分析研究[J].制造业自动化,2013,35(22):7-9.
[3]邹乃威,王庆年,刘金刚,等.混合动力汽车行星机构动力耦合装置控制研究[J].中国机械工程,2010,21(23):2847-2851.
[4]彭志远,秦大同,段志辉,等.新型混合动力汽车工作模式分析与参数匹配设计[J].中国机械工程,2012,23(9):1122-1128.
[5]崔亚辉,刘晓琳,马朝锋,等.混合动力车用单行星排的动力学分析[J].机械设计,2008(9):45-47.
[6]黄宝磊.PHEV行星齿轮传动系统设计及仿真[J].机械设计与制造,2012(2):1-3.
[7]饶振纲.行星传动机构设计[M].北京:国防工业出版社,1994.
[8]李建,郑立斌,石长华,等.基于UG及ADAMS行星齿轮机构的建模及运动仿真[J].景德镇学院学报,2016,31(6):9-12.
[9]吴留华,陈辛波.基于ADAMS的等角速RRERR空间五杆机构特性分析[J].机械设计与制造,2011(1):221-222.
[10]赵宁,孙向轩,蔺彦虎,等.直齿圆柱齿轮差速器运动学与动力学分析仿真[J].计算机仿真,2012,29(8):344-348.