高聚合物树脂复合钢板材料的力学性能研究与分析
|
摘要
基于树脂复合钢板在汽车前围板上的开发应用,文章针对高聚物树脂复合钢板的基础性能进行试验研究、并测试复合钢板材料的力学性能以及两表层钢板之间的剪切粘结强度与法向黏结强度,得到材料的理化性能以及两表层之间的结合强度。从而为复合减振钢板材料的产品设计提供依据,同时也为改进复合减振钢板的生产工艺以适应其产品的生产要求提供参考。
Based on development and application on dash panel using resin composite steel, In this paper, the basic properties of high polymer resin composite damping steel plate are tested, and the mechanical properties of the composite steel plate and the shear bond strength and the normal bonding strength between the two surface steel plates are tested. The physical and chemical properties of the material and the bonding strength between the two surfaces were obtained. It provides the basis for the product design of the composite damping steel plate material, and also provides a reference for improving the production process of the composite damping steel plate in order to meet the production requirements of its products.
Based on development and application on dash panel using resin composite steel, In this paper, the basic properties of high polymer resin composite damping steel plate are tested, and the mechanical properties of the composite steel plate and the shear bond strength and the normal bonding strength between the two surface steel plates are tested. The physical and chemical properties of the material and the bonding strength between the two surfaces were obtained. It provides the basis for the product design of the composite damping steel plate material, and also provides a reference for improving the production process of the composite damping steel plate in order to meet the production requirements of its products.
引文
[1]吕成,张国梁,张立文等.高分子复合减振钢板的研究及其应用进展[J].机械工程材料,2005,29(3):4-6.
[2]徐涛.金属层状复合材料的发展与应用[J].轻合金加工技术,2012,40(6):7-10.
[3]Cheng H S,Cao J,Yao H,et al.Wrinkling behavior of laminated steel sheets[J].J Mater Process Tech,2004,151:133-140.
[4]陈劼实,陈军,黄元辰等.树脂复合减振钢板法向黏结强度与扩孔性能的试验研究[J].上海交通大学学报,2011,45(6):920-921.
[5]Fleck N A,Johnson K L,Towards a new theory of cold rolling thin foil[J].International Journal of Mechanical Sciences,1987,29(7):507-524.
[6]I Scheider,W Brocks.Application of interface elements for material separation to shell structures.2003 ABAQUS Users.Conference,2003,1-12.
[7]Li H B,Chen J,Yang J.Experimental and numerical investigation of laminated steel sheet in V-bending process considering nonlinear visco-elasticity of polymer layer[J].J Mater Process Tech,2012,212:36-45.
[2]徐涛.金属层状复合材料的发展与应用[J].轻合金加工技术,2012,40(6):7-10.
[3]Cheng H S,Cao J,Yao H,et al.Wrinkling behavior of laminated steel sheets[J].J Mater Process Tech,2004,151:133-140.
[4]陈劼实,陈军,黄元辰等.树脂复合减振钢板法向黏结强度与扩孔性能的试验研究[J].上海交通大学学报,2011,45(6):920-921.
[5]Fleck N A,Johnson K L,Towards a new theory of cold rolling thin foil[J].International Journal of Mechanical Sciences,1987,29(7):507-524.
[6]I Scheider,W Brocks.Application of interface elements for material separation to shell structures.2003 ABAQUS Users.Conference,2003,1-12.
[7]Li H B,Chen J,Yang J.Experimental and numerical investigation of laminated steel sheet in V-bending process considering nonlinear visco-elasticity of polymer layer[J].J Mater Process Tech,2012,212:36-45.