摘要
通过对纤维测量仪采集的图像进行计算,得出纸浆纤维长度、卷曲度及细小纤维含量等形态参数,通过实验获取纸浆抄造性能。探究了纤维形态参数与纸浆抄造性能之间的关系,并对描述的可行性进行了分析和验证。
Through the calculation of the images collected by the fiber measuring instrument,the morphological parameters of the pulp including fiber length,curl and fines were obtained,at the same time the papermaking performance of the pulp was studied by experiment. The relationship between morphological parameters of the pulp and its papermaking performance was analyzed and verified.
引文
[1]王丹枫.纤维形态参数及测量[J].中国造纸,2000,19(1):36.
[2]马磊.基于机器视觉的纸浆纤维形态参数测量的研究[D].济南:山东轻工业学院,2009.
[3]沈阳耀,陶利.浅谈全木浆底层纸的抄造[J].江苏造纸,2001(3):19.
[4]陈礼辉,詹怀宇.混合竹材漂白硫酸盐浆湿纸幅强度和黏附特性[J].中国造纸学报,2003,18(2):94.
[5]何北海,卢谦和.非木纤维纸浆的抄造性能研究[J].华南理工大学学报,1998,26(7):99.
[6]李权,林金国,黄秋月,等.三年生花眉竹不同部位纤维形态特征的分析研究[J].中国造纸,2017,36(6):27.
[7]范玉敏,汤人望,胡晓东,等.聚乳酸纤维在湿法非织造材料生产中的抄造性能[J].中国造纸,2014,33(10):31.
[8]Seth R S,Page D H.Fiber properties and tearing resistance[J].TAPPI Journal,1988,71(2):103.
[9]Seth R S,Kingsland M A.The reinforcing properties of softwood kraft pulps[J].Pulp&Paper Canada,1990,91(7):T273.
[10]卫晓琳,李洪才.细小组分和纤维之间的相互作用及其对纸张性能的影响[J].国际造纸,2013,32(1):17.
[11]陈道义,张军营.胶结基本原理[M].北京:科学出版社,1992.
[12]陈礼辉,何北海,詹怀宇,等.纸浆抄造性能的评价方法[J].福建林学院学报,2001,21(2):116.