摘要
弯管形状复杂,采用常用的单一计算机软件难以生成满足数控切割机要求的下料工程图。通过不同软件的交互使用,可以快速生成弯管的下料工程图。以等径不同平面Y形三通管和异径圆口连接管为例,对这一过程进行了介绍与分析。
The shape of the elbow is complicated, and it is difficult to generate a blanking drawing that meets the requirements of the NC cutting machine by a single computer software in common use. Through the interactive use of different software, the blanking drawing of the elbow can be quickly generated. Taking Y-shaped pipe with same diameters in different planes and round pipe with different diameters as examples,the processes were introduced and analyzed.
引文
[1]JGJ 52-2006普通混凝土用砂、石质量及检验方法标准[S].
[2]李仪钰,周恩浦,李健成.矿山机械(选矿机械部分)[M]北京:冶金工业出版社,1981.
[3]成大先.机械设计手册[M].6版.北京:化学工业出版社,2016.
[4]陈祝年.焊接工程师手册[M].北京:机械工业出版社,2002.
[5]范思冲.画法几何及机械制图[M].2版.北京:机械工业出版社,2014.
[6]江宇,周雄,刘志华.基于SolidWorks软件二次开发的通用零件库[J].机械制造,2018,56(8):50-53.
[7]龙马工作室.AutoCAD 2010中文版完全自学手册[M].北京:人民邮电出版社,2010.
[8]詹迪优.UG NX 8.0快速入门教程(典藏版)[M].北京:机械工业出版社,2015.
[9]北航CAXA教育培训中心.CAXA实体设计三维动画与多媒体制作实例教程[M].北京:北京航空航天大学出版社,2006.
[10]马德成.钣金展开图及工艺基础[M].北京:化学工业出版社,2014.