基于ANSYS摆线齿轮设计研究与UG制造分析
|
摘要
以摆线齿轮(内转子和外转子)为研究对象,利用Pro/e软件参数化建模功能,对摆线齿轮的内转子轮廓方程进行参数化编程建模,得出摆线齿轮内转子三维模型;绘制摆线齿轮的外转子三维模型,将摆线齿轮(内、外转子)进行啮合装配并导入ANASYS workbench软件,对摆线齿轮的啮合进行有限元分析,得出摆线齿轮啮合处的应力云图、应变云图;利用UG软件的数控加工仿真功能对其进行自动编程设置,得出铣削摆线齿轮外形的铣削NC程序。
Taking cycloidal gear( inner rotor and outer rotor) as the research object,using Pro/e software parametric modeling capabilities,inner rotor of cycloidal gear profile equation was modeled and parametric programming cycloidal gear inside the rotor 3 d model was obtained. The outer rotor three-dimensional model of cycloid gear was drawn and the cycloidal gear mesh( internal and external rotor)was assembled and input into the ANASYS workbench software to do finite element analysis of the cycloidal gear so that the stress of contours and strain contours of the cycloidal gear meshing were obtained; Using UG software functions for NC machining simulation to do automatic programming,the milling cycloidal gear contour milling NC program was obtained.
Taking cycloidal gear( inner rotor and outer rotor) as the research object,using Pro/e software parametric modeling capabilities,inner rotor of cycloidal gear profile equation was modeled and parametric programming cycloidal gear inside the rotor 3 d model was obtained. The outer rotor three-dimensional model of cycloid gear was drawn and the cycloidal gear mesh( internal and external rotor)was assembled and input into the ANASYS workbench software to do finite element analysis of the cycloidal gear so that the stress of contours and strain contours of the cycloidal gear meshing were obtained; Using UG software functions for NC machining simulation to do automatic programming,the milling cycloidal gear contour milling NC program was obtained.
引文
[1]徐义华,陈为国,韩守磊.摆线泵内转子理论型线参数方程及内外转子的建模[J].机床与液压,2008,36(1):107-116.
[2]徐学忠.摆线泵基本参数的优化设计[J].液压与气动,2003(12):6-7.
[3]张品湘,胡海梁,张岷.摆线齿轮有限元分析[J].传动技术,1997(3).
[4]陈英,李伟,等.基于Pro/E的CAD/CAM技术[M].北京:机械工业出版社,2008.
[5]陈艳霞,陈磊,等.ANSYS Workbench工程应用案例精通[M].北京:电子工业出版社,2012.
[6]张宝玉,苏进展,方宗德,等.基于滚齿加工的摆线齿线圆柱齿轮精确建模及有限元分析[J].机械传动,2014(2).
[7]张炜.内啮合摆线转子齿轮泵的优化设计及加工工艺分析[D].福州:福州大学,2006.
[8]刘建壮.新型泛摆线齿轮齿形设计的研究[D].哈尔滨:哈尔滨工业大学,2013.
[9]徐学忠.内啮合摆线齿轮泵的理论研究与仿真[D].南京:东南大学,2005.
[10]许洪基,雷光.现代机械传动手册[M].北京:机械工业出版社,2002.
[11]温秉权.金属材料手册[M].北京:电子工业出版社,2009.
[2]徐学忠.摆线泵基本参数的优化设计[J].液压与气动,2003(12):6-7.
[3]张品湘,胡海梁,张岷.摆线齿轮有限元分析[J].传动技术,1997(3).
[4]陈英,李伟,等.基于Pro/E的CAD/CAM技术[M].北京:机械工业出版社,2008.
[5]陈艳霞,陈磊,等.ANSYS Workbench工程应用案例精通[M].北京:电子工业出版社,2012.
[6]张宝玉,苏进展,方宗德,等.基于滚齿加工的摆线齿线圆柱齿轮精确建模及有限元分析[J].机械传动,2014(2).
[7]张炜.内啮合摆线转子齿轮泵的优化设计及加工工艺分析[D].福州:福州大学,2006.
[8]刘建壮.新型泛摆线齿轮齿形设计的研究[D].哈尔滨:哈尔滨工业大学,2013.
[9]徐学忠.内啮合摆线齿轮泵的理论研究与仿真[D].南京:东南大学,2005.
[10]许洪基,雷光.现代机械传动手册[M].北京:机械工业出版社,2002.
[11]温秉权.金属材料手册[M].北京:电子工业出版社,2009.