摘要
本文首先介绍了利用Matlab软件中的FDAtool界面来设计数字低通滤波器,其次介绍了采用脉冲响应不变法以及用编程的方法设计数字低通滤波器,最后还进行了Simulink的仿真,结果达到要求。
This article firstly introduces to how to design a digital low-pass filter with the FDA TOOL interface of Matlab software. Secondly it discusses how to design a digital low-pass filter with pulse response invariant method and programmming. Finally the Simulink simulation is carried out and the results meet the requirements.
引文
[1] 吴大正.信号与系统[M].4版.北京:高等教育出版社,2005.
[2] 高西全,丁玉美.数字信号处理 [M].4版.西安:西安电子科技大学出版社,2016:122.
[3] 李茂,任学恒.基于Matlab/Simulink的数字滤波器设计与仿真[D].成都:电子科技大学,2007.
[4] 刘舒帆,费诺,陆辉.数字信号处理实验[M].西安:西安电子科技大学出版社,2008:67.
[5] 王正林.Matlab/Simulink与控制系统仿真 [M].4版.北京:电子工业出版社,2017:25.