缓坡副斜井错车硐室设置方式及间距研究
|
摘要
为有效提高缓坡副斜井井筒内无轨胶轮车的通行能力,防止运输安全事故的发生,降低工程建设投资,结合矿井实际运输量及井筒断面尺寸,选择合理的错车硐室形式。通过理论计算与分析,合理确定错车硐室的断面宽度、错车硐室有效长度和错车硐室的设置间距,降低了井巷工程量及建设投资,有效发挥了错车硐室的交会错让功能,为其他类似条件下错车硐室的设置提供了参考、应用价值。
In order to effectively improve the traffic capacity of the trackless rubber wheel in the gentle slope auxiliary inclined shaft,avoid transportation safety accidents and reduce the investment of engineering construction,in this paper,combined with the actual mine transportation quantity and shaft section size,the reasonable form of the passing chamber was selected,and through the theoretical calculation and analysis,a reasonable section width,passing chamber effective length and spacing were was determined,so as to reduce the roadway engineering quantity and construction investment,and realize the traffic function of the passing chamber. The study can provide reference and application value for the passing chambers under similar conditions.
In order to effectively improve the traffic capacity of the trackless rubber wheel in the gentle slope auxiliary inclined shaft,avoid transportation safety accidents and reduce the investment of engineering construction,in this paper,combined with the actual mine transportation quantity and shaft section size,the reasonable form of the passing chamber was selected,and through the theoretical calculation and analysis,a reasonable section width,passing chamber effective length and spacing were was determined,so as to reduce the roadway engineering quantity and construction investment,and realize the traffic function of the passing chamber. The study can provide reference and application value for the passing chambers under similar conditions.
引文
[1]梁生芳.浅谈无轨胶轮车辅助运输[J].煤炭工程,2003,35(10):9-11.
[2]王利欣,陈云,贾彦楠.无轨胶轮车巷道避险车道设置方法研究[J].煤炭工程,2016,48(8):15-17.
[3]张忠文.缓坡副斜井避险硐室设置研究[J].煤炭工程,2017,49(1):4-6.
[4] GB 50533—2009,煤矿井下辅助运输设计规范[S].
[5] GB 50415—2017,煤矿斜井井筒及硐室设计规范[S].
[6] JTGD20—2006,公路路线设计规范[S].
[7]刘国旺,郭志东,田磊,等.乡村公路错车道设置技术研究[J].湖南交通科技,2015,41(2):206-209.
[8]黄勇,项乔君,陆键.单车道农村公路错车道设置方法研究[J].交通运输工程与信息学,2011,9(3):69-74.
[9] GB 50215—2005,煤炭工业矿井设计规范[S].
[10]王锋,张金喜,蓝晓琴.农村单车道公路错车道设置参数研究[J].武汉理工大学学报,2011,35(5):940-944.
[11]国家安全生产监督管理局,国家煤矿安全监察局.煤矿安全规程[M].北京:煤炭工业出版社,2016.
[2]王利欣,陈云,贾彦楠.无轨胶轮车巷道避险车道设置方法研究[J].煤炭工程,2016,48(8):15-17.
[3]张忠文.缓坡副斜井避险硐室设置研究[J].煤炭工程,2017,49(1):4-6.
[4] GB 50533—2009,煤矿井下辅助运输设计规范[S].
[5] GB 50415—2017,煤矿斜井井筒及硐室设计规范[S].
[6] JTGD20—2006,公路路线设计规范[S].
[7]刘国旺,郭志东,田磊,等.乡村公路错车道设置技术研究[J].湖南交通科技,2015,41(2):206-209.
[8]黄勇,项乔君,陆键.单车道农村公路错车道设置方法研究[J].交通运输工程与信息学,2011,9(3):69-74.
[9] GB 50215—2005,煤炭工业矿井设计规范[S].
[10]王锋,张金喜,蓝晓琴.农村单车道公路错车道设置参数研究[J].武汉理工大学学报,2011,35(5):940-944.
[11]国家安全生产监督管理局,国家煤矿安全监察局.煤矿安全规程[M].北京:煤炭工业出版社,2016.