摘要
通过分析射频识别设备的特征,结合电力线能传输电力载波信号的特点,设计一种信号传输的方式.该信号传输方式能将射频识别的信号,通过单片机系统进行转换,调制成电力载波信号,传输至电力线中.利用电力线,将数据传输至接收端.接收端对信号进行解调后,将数据传输到计算机监控中心.通过此方式可以对重大型设备进行实时监控,因而节约了设备维护监控成本.
through the analysis of the characteristics of the radio frequency identification device,and combined with the characteristics of the power line capable of transmitting the power line carrier signal,a good signal transmission mode was designed.The signal transmission mode,converted by the microcontroller system,can modulate radio frequency identification signals into the power line carrier signal and transmit them to the power line.Using the power line,it can transfer the data to the reception side.The receiving end demodulates the signal,data transmission to computer monitoring center.This real-time monitoring of the major type of equipment can save equipment maintenance monitoring costs.
引文
[1]彭灿明.基于传感器和电力载波通讯的煤矿生产监控系统设计[J].煤炭工程,2012(12):132-134.
[2]詹圣红.电力线载波技术在设施监测系统中的应用[D].上海:上海交通大学,2008(22):58-61.
[3]刘明周,王强,葛茂根,等.基于射频识别的装配过程监控体系研究[J].合肥工业大学学报(自然科学版),2012(9):45-47.
[4]吴丽萍.面向无线射频识别技术的中量级加密通信协议[J].杭州电子科技大学学报,2012(1):57-60.
[5]魏国珩,张焕国.AES的轻量优化及其在射频识别标签中的应用[J].武汉大学学报(理学版),2012(6):78-81.
[6]张兢,李成勇,王猛.基于射频识别技术的多目标识别防碰撞算法[J].重庆理工大学学报(自然科学),2012(9):58-61.