摘要
以某2 MW水平轴风力发电机组为计算模型,分别采用GH Bladed软件和日本《风力发电设备塔架结构设计指南及解说》对该风电机组塔架的极限风载荷进行计算,并研究在正常发电工况和暴风工况下2种计算方法的差异。结果表明,由2种计算方法得到的正常发电工况下的极限风载荷均大于暴风工况,由GH Bladed软件得到的极限风载荷计算结果偏大。造成极限风载荷差异的主要原因是2种计算方法的风况条件、工况种类及理论基础不同造成的。对于风力发电机塔架这种典型的"高鸡腿哑铃式"高耸结构因其塔顶部位受风轮、机舱的影响较大,采用GH Bladed软件计算结果更精确。
In the 2 MW horizontal axis wind turbine simulation model,using GH Bladed and the Japanese " Guidelines for Design and Explanation of Wind Power Generation Equipment Tower Structure " to calculate the ultimate wind load of the wind turbine tower respectively,and studied the difference in normal power conditions and storm conditions of two kinds of calculation methods. The results showed that the limit wind load in the normal power generation condition is higher than that of the storm condition by the two calculation methods. The results calculated by the Bladed GH are too large. The main reason of the difference of the limit wind load is two kinds of calculation methods,which are the condition of wind condition,the type of working condition and the different theoretical basis. For the wind turbine tower is a kind of typical "high leg dumbbell" high-rise structure,tower parts influence wind wheel,the cabin is relatively large,the calculation results using the GH Bladed software is more accurate.
引文
[1]马林静,刘军,王树军.风电机组载荷计算标准的对比研究[J].太阳能学报,2015,36(1):71—77.[1] Ma Linjing, Liu Jun, Wang Shujun. Comparison research of load calculation standard for wind turbines[J]. Acta Energiae Solaris Sinica,2015,36(1):71—77.
[2] Burton T,Sharpe D,Jenkins N,et al. Wind energy handbook[M]. New York:John Wiley&Sons,Ltd.,2001.
[3]李娟,刘江波,冯红岩.风况仿真设定对风机载荷计算的影响[J].机械设计与制造,2012,(5):194—196.[3] Li Juan,Liu Jiangbo,Feng Hongyan. The effect of wind condition setting simulated on load calculation of wind turbines[J]. Machinery Design&Manufacture,2012,(5):194—196.
[4]邓英,周峰,田德,等.不同风湍流模型的风电机组载荷计算研究[J].太阳能学报,2014,35(12):2395—2499.[4] Deng Ying,Zhou Feng,Tian De,et al. Research on load calculation of wind turbine for different wind turbulence model[J]. Acta Energiae Solaris Sinica,2014,35(12):2395—2499.
[5] IEC 61400-1. Wind Turbine-Part 1:Design requirement(3rd Ed.)[S]. 2005.
[6] Germanischer Lyoyd. Guideline for the certification of wind turbine[J]. Germanischer Lyoyd Industrical Service GmbH,2010.
[7]中国船级社,风力发电机组规范[S].北京:人民交通出版社,2008.[7] China Classification Society,National standard of wind turbines[S]. Beijing:China Communication Press,2008
[8]日本土木学会.风力发电设备塔架结构设计指南及解说[M].祝磊,许楠,高颖(译).北京:中国建筑工业出版社出版,2014.[8] Japan Socity of Civil Engineers. Guidelines for design and explanation of wind power generation equipment tower structure[M]. Translation by Zhu Lei,Xu Nan,Gao Ying. Beijing:China Architecture&Buiding Press,2014.
[9]夏雪莲.包头地区风和风能资源[J].内蒙古气象,2012,(1):31—33.[9] Xia Xuelian. Wind and wind energy resources of Baotou region[J]. Meteorolgy Journal of Inner Mongolia,2012,(1):31—33.