大口径舰炮反后坐装置快速设计模块开发
|
摘要
为了提高大口径舰炮反后坐装置的设计效率,对其进行了快速设计模块开发研究。基于装配体三维模板的参数化程序设计思路,将设计知识和经验嵌入了功能模块并用设计流程的形式表述,形成了界面化的程序计算、后坐规律图形输出和参数驱动一体的设计方法。通过自顶向下参数化建模、VC与Matlab混合编程、MFC界面设计,实现了大口径舰炮反后坐装置快速设计模块的开发。以某大口径舰炮反后坐装置为设计实例验证了该模块的可行性和有效性。该模块开发方法为火炮工程设计提供了参考。
In order to improve the design efficiency of a large caliber naval gun recoil mechanism,a development method of rapid design module was proposed. In accordance with the theory of 3D assembly model parametric design by means of program control,design knowledge and experience are embedded in a functional module,which is enunciated in the form of design process. As a result,a design method integrating program calculation,graphic output of the recoil curve and parameter driving comes into being. The rapid design module of a large caliber naval gun was set up through the use of top-down parameter modeling method,the mixed programming between VCand Matlab,and the design of MFC interface. Finally,the feasibility and availability of the rapid design module were verified with a large caliber naval gun recoil mechanism experimental set-up. This module development method offers a reference for artillery engineering design.
In order to improve the design efficiency of a large caliber naval gun recoil mechanism,a development method of rapid design module was proposed. In accordance with the theory of 3D assembly model parametric design by means of program control,design knowledge and experience are embedded in a functional module,which is enunciated in the form of design process. As a result,a design method integrating program calculation,graphic output of the recoil curve and parameter driving comes into being. The rapid design module of a large caliber naval gun was set up through the use of top-down parameter modeling method,the mixed programming between VCand Matlab,and the design of MFC interface. Finally,the feasibility and availability of the rapid design module were verified with a large caliber naval gun recoil mechanism experimental set-up. This module development method offers a reference for artillery engineering design.
引文
[1]谈乐斌,张相炎,郑建国,等.火炮概论[M].北京:北京理工大学出版社,2014:97-102.TAN Lebin,ZHANG Xiangyan,ZHENG Jianguo,et al.Introduction to artillery[M].Beijing:Beijing Institute of Technology Press,2014:97-102.(in Chinese)
[2]高树滋,陈运生,张月林,等.火炮反后坐装置设计[M].北京:兵器工业出版社,1995.GAO Shuzi,CHEN Yunsheng,ZHANG Yuelin,et al.Design of recoil system for guns[M].Beijing:The Publishing House of Ordnance Industry,1995.(in Chinese)
[3]曹广群,姚红云,刘树华,等.基于二次开发的液体气压式复进机参数化设计[J].中北大学学报:自然科学版,2009,30(1):46-49.CAO Guangqun,YAO Hongyun,LIU Shuhua,et al.Parametric design of hydropneumatic recuperator based on the redevelopment[J].Journal of North University of China:Natural Science Edition,2009,30(1):46-49.(in Chinese)
[4]狄长春,陈永才,王兴贵,等.火炮总体结构参数化设计研究[J].机械,2002,29(2):17-18.DI Changchun,CHEN Yongcai,WANG Xinggui,et al.Study on artillery whole structure parametric design[J].Mechinery,2002,29(2):17-18.(in Chinese)
[5]刘启航,徐亚栋,羊柳.节制杆式制退机参数化设计及优化[J].火炮发射与控制学报,2013(4):49-53.LIU Qihang,XU Yadong,YANG Liu.Parameterization design and optimization of throttling bar recoil mechanism[J].Jouranal of Gun Launch&Control,2013(4):49-53.(in Chinese)
[6]刘启航,徐亚栋.火炮反后坐装置参数化设计及优化[D].南京:南京理工大学,2014.LIU Qihang,XU Yadong.Parameterization design and optimization of recoil mechanism[D].Nanjing:Nanjing University of Science&Technology,2014.(in Chinese)
[7]北京兆迪科技有限公司.UG NX 8.5宝典[M].北京:中国水利水电出版社,2013:474-502.Beijing Zalldy Technology Limited Company.UG NX 8.5Collection[M].Beijing:China Water Power Press,2013:474-502.(in Chinese)
[8]张开运,田怀文.基于UG的产品级三维参数化设计研究[J].机械,2011,38(2):36-40.ZHANG Kaiyun,TIAN Huaiwen.Research of productlevel three-dimensional parametric design based on UG[J].Machinery,2011,38(2):36-40.(in Chinese)
[9]史丽媛,祝锡晶,马继召.基于UG参数化设计系统的研究[J].图学学报,2013,34(2):108-112.SHI Liyuan,ZHU Xijing,MA Jizhao.A UG-based parametric design system[J].Journal of Graphics,2013,34(2):108-112.(in Chinese)
[10]刘冰,张林,蒋贵全,等.Visual C++2010程序设计案例教程[M].北京:机械工业出版社,2013:14-22.LIU Bing,ZHANG Lin,JIANG Guiquan,et al.Visual C2010 program design cases tutorial[M].Beijing:China Machine Press,2013:14-22.(in Chiese)
[2]高树滋,陈运生,张月林,等.火炮反后坐装置设计[M].北京:兵器工业出版社,1995.GAO Shuzi,CHEN Yunsheng,ZHANG Yuelin,et al.Design of recoil system for guns[M].Beijing:The Publishing House of Ordnance Industry,1995.(in Chinese)
[3]曹广群,姚红云,刘树华,等.基于二次开发的液体气压式复进机参数化设计[J].中北大学学报:自然科学版,2009,30(1):46-49.CAO Guangqun,YAO Hongyun,LIU Shuhua,et al.Parametric design of hydropneumatic recuperator based on the redevelopment[J].Journal of North University of China:Natural Science Edition,2009,30(1):46-49.(in Chinese)
[4]狄长春,陈永才,王兴贵,等.火炮总体结构参数化设计研究[J].机械,2002,29(2):17-18.DI Changchun,CHEN Yongcai,WANG Xinggui,et al.Study on artillery whole structure parametric design[J].Mechinery,2002,29(2):17-18.(in Chinese)
[5]刘启航,徐亚栋,羊柳.节制杆式制退机参数化设计及优化[J].火炮发射与控制学报,2013(4):49-53.LIU Qihang,XU Yadong,YANG Liu.Parameterization design and optimization of throttling bar recoil mechanism[J].Jouranal of Gun Launch&Control,2013(4):49-53.(in Chinese)
[6]刘启航,徐亚栋.火炮反后坐装置参数化设计及优化[D].南京:南京理工大学,2014.LIU Qihang,XU Yadong.Parameterization design and optimization of recoil mechanism[D].Nanjing:Nanjing University of Science&Technology,2014.(in Chinese)
[7]北京兆迪科技有限公司.UG NX 8.5宝典[M].北京:中国水利水电出版社,2013:474-502.Beijing Zalldy Technology Limited Company.UG NX 8.5Collection[M].Beijing:China Water Power Press,2013:474-502.(in Chinese)
[8]张开运,田怀文.基于UG的产品级三维参数化设计研究[J].机械,2011,38(2):36-40.ZHANG Kaiyun,TIAN Huaiwen.Research of productlevel three-dimensional parametric design based on UG[J].Machinery,2011,38(2):36-40.(in Chinese)
[9]史丽媛,祝锡晶,马继召.基于UG参数化设计系统的研究[J].图学学报,2013,34(2):108-112.SHI Liyuan,ZHU Xijing,MA Jizhao.A UG-based parametric design system[J].Journal of Graphics,2013,34(2):108-112.(in Chinese)
[10]刘冰,张林,蒋贵全,等.Visual C++2010程序设计案例教程[M].北京:机械工业出版社,2013:14-22.LIU Bing,ZHANG Lin,JIANG Guiquan,et al.Visual C2010 program design cases tutorial[M].Beijing:China Machine Press,2013:14-22.(in Chiese)