整体硬质合金立铣刀设计过程分层建模
|
摘要
结合整体硬质合金立铣刀设计特点,对设计过程模型提出要求,并建立整体硬质合金立铣刀的设计过程分层模型,从而清晰地呈现出整体硬质合金立铣刀的设计过程的全面性、协作性、层次性等特点,为提高整体硬质合金立铣刀的设计效率提供参考。
Combining with the characteristics of the graphic design process of solid carbide end mills,a layered model for the design process of solid carbide end mills is established to clearly present the design process of solid carbide end mills is comprehensive,collaborative,and hierarchical,which is laying the foundation for improving the design efficiency of solid carbide end mills.
Combining with the characteristics of the graphic design process of solid carbide end mills,a layered model for the design process of solid carbide end mills is established to clearly present the design process of solid carbide end mills is comprehensive,collaborative,and hierarchical,which is laying the foundation for improving the design efficiency of solid carbide end mills.
引文
[1]袁哲俊,刘华明.刀具设计手册[M].北京:机械工业出版社,1999.
[2]范忠仁,陈世忠.刀具工程师手册[M].哈尔滨:黑龙江科学技术出版社,1985.
[3]邵子东.高速整体硬质合金立铣刀结构设计及其性能研究[D].济南:山东大学,2007.
[4]Chen W Y,Chang P C,Liaw S D,et al. A study of design and manufacturing models for circular-arc ball-end milling cutters[J]. Journal of Materials Processing Technology,2005,161(3):467-477.
[5]Hsieh B,Jone Ming. A study on the design and machining characteristics of milling cutters[J]. Mechanical and Electro-mechanical Engineering,2003,21(6):456-476.
[6]高秀兰.数控立铣刀的设计[J].成飞科技,2002(3):8-10.
[7]李伟刚.复杂产品协同开发支撑环境的关键技术研究[D].西安:西北工业大学,2003.
[8]Kumagai S,Hasegawa A,Kawabata R,et al. Building workflow for collaboration task using muti-context map[J]. Journal of Integrated Design&Process Science,2000,4(3):49-62.
[9]崔卫华,李刚炎,王慧,等.复杂产品协同设计过程建模方法研究[J].武汉理工大学学报(交通科学与工程版),2005,29(4):620-623.
[2]范忠仁,陈世忠.刀具工程师手册[M].哈尔滨:黑龙江科学技术出版社,1985.
[3]邵子东.高速整体硬质合金立铣刀结构设计及其性能研究[D].济南:山东大学,2007.
[4]Chen W Y,Chang P C,Liaw S D,et al. A study of design and manufacturing models for circular-arc ball-end milling cutters[J]. Journal of Materials Processing Technology,2005,161(3):467-477.
[5]Hsieh B,Jone Ming. A study on the design and machining characteristics of milling cutters[J]. Mechanical and Electro-mechanical Engineering,2003,21(6):456-476.
[6]高秀兰.数控立铣刀的设计[J].成飞科技,2002(3):8-10.
[7]李伟刚.复杂产品协同开发支撑环境的关键技术研究[D].西安:西北工业大学,2003.
[8]Kumagai S,Hasegawa A,Kawabata R,et al. Building workflow for collaboration task using muti-context map[J]. Journal of Integrated Design&Process Science,2000,4(3):49-62.
[9]崔卫华,李刚炎,王慧,等.复杂产品协同设计过程建模方法研究[J].武汉理工大学学报(交通科学与工程版),2005,29(4):620-623.