油气井杆管柱力学研究进展与争论
|
摘要
油气井杆管柱是石油钻采作业的脊梁和中枢神经。在石油与天然气工程学科中,油气井杆管柱力学是一门重要的应用基础科学。先介绍了油气井杆管柱力学的相关专著、从事油气井杆管柱力学研究学者、研究油气井杆管柱力学的方法并澄清了一些基本概念;进一步重点介绍了油气井杆管柱力学基本原理、油气井杆管柱的运动状态、油气井杆管柱动力学基本方程、油气井杆管柱的稳定性、油气井杆管柱的稳态拉力扭矩、下部钻具三维力学分析、钻柱动力学、套管柱力学分析、测试管柱力学分析、压裂注水注汽管柱力学分析、有杆泵抽油系统诊断和参数优选与节能、采气管柱的振动、管柱的冲击震动、膨胀筛(套)管力学分析、隔水管柱力学分析、振动波信号在管柱中的传播、管柱的磨损和腐蚀与冲蚀、管柱的剩余强度和疲劳强度预测等方向的进展与争论;展望了油气井杆管柱力学的重点研究方向。
Tubular strings are considered as the backbone and central nervous system for oil drilling and production operations in oil and gas wells.Tubular mechanics in oil and gas wells is the most important basic and applied science in petroleum and natural gas engineering.In this study,the monographs on tubular mechanics,the scholars engaged in this field and relevant research methods were introduced and some basic concepts were clarified firstly.Then,this study focuses on the research advances and debates on the fundamental principles and basic equations of tubular mechanics,the motion states,stability and steady state tension-torque of tubular strings,the3 D mechanical analysis of bottom hole assembly,the dynamic analyses of drill strings,the mechanical analyses,casing strings,testing strings and fracturing water injection/steam injection tubular strings,the diagnosis,parameter optimization and energy saving of rod pumping system,the vibration of gas production tubular strings,the impact vibration of strings,the mechanical analyses of swelling screen pipe/casing and riser strings,the propagation of vibration wave signals in strings,as well as string wear,corrosion and erosion,and the residual strength and fatigue strength forecast of strings.Finally,the key directions for future research are prospected.
Tubular strings are considered as the backbone and central nervous system for oil drilling and production operations in oil and gas wells.Tubular mechanics in oil and gas wells is the most important basic and applied science in petroleum and natural gas engineering.In this study,the monographs on tubular mechanics,the scholars engaged in this field and relevant research methods were introduced and some basic concepts were clarified firstly.Then,this study focuses on the research advances and debates on the fundamental principles and basic equations of tubular mechanics,the motion states,stability and steady state tension-torque of tubular strings,the3 D mechanical analysis of bottom hole assembly,the dynamic analyses of drill strings,the mechanical analyses,casing strings,testing strings and fracturing water injection/steam injection tubular strings,the diagnosis,parameter optimization and energy saving of rod pumping system,the vibration of gas production tubular strings,the impact vibration of strings,the mechanical analyses of swelling screen pipe/casing and riser strings,the propagation of vibration wave signals in strings,as well as string wear,corrosion and erosion,and the residual strength and fatigue strength forecast of strings.Finally,the key directions for future research are prospected.
引文
[1]沃兹德维任斯基.钻井力学[M].杨惠民,译.北京:石油工业出版社,1958:1-486.Vozdvizhenski B H.Drilling mechanics[M].Yang Huimin,trans.Beijing:Petroleum Industry Press,1958:1-486.
[2]Lubinski A.Developments in petroleum engineering(Volume I)[M].Houston,Texas:Gulf Publishing Co.,1987.
[3]Lubinski A.Developments in petroleum engineering(Volume II)[M].Houston,Texas:Gulf Publishing Co.,1988.
[4]鲁宾斯基A.钻井工程进展(第一册)[M].黎孔昭,严世才,朱千里,等译.北京:石油工业出版社,1994:1-297.Lubinski A.Developments in petroleum engineering(Volume I)[M].Li Kongzhao,Yan Shicai,Zhu Qianli,et al,trans.Beijing:Petroleum Industry Press,1994:1-297.
[5]鲁宾斯基A.钻井工程进展(第二册)[M].鲍有光,梅江,译.北京:石油工业出版社,1993:1-238.Lubinski A.Developments in petroleum engineering(Volume II)[M].Bao Youguang,Mei Jiang,trans.Beijing:Petroleum Industry Press,1993:1-238.
[6]赵国珍,龚伟安.钻井力学基础[M].北京:石油工业出版社,1988:1-372.Zhao Guozhen,Gong Wei'an.Foundation of drilling mechanics[M].Beijing:Petroleum Industry Press,1988:1-372.
[7]白家祉,苏义脑.井斜控制理论与实践[M].北京:石油工业出版社,1990:1-401.Bai Jiazhi,Su Yinao.Deviation control theory and practice[M].Beijing:Petroleum Industry Press,1990:1-401.
[8]苏义脑.水平井井眼轨道控制[M].北京:石油工业出版社,2000:1-250.Su Yinao.Horizontal well trajectory control[M].Beijing:Petroleum Industry Press,2000:1-250.
[9]苏义脑.油气直井防斜打快技术——理论与实践[M].北京:石油工业出版社,2003:1-87.Su Yinao.Deviation control and fast drilling technology of oilgas vertical wells:theory and practice[M].Beijing:Petroleum Industry Press,2003:1-87.
[10]高德利,刘希圣,徐秉业.井眼轨迹控制[M].东营:石油大学出版社,1994:1-259.Gao Deli,Liu Xisheng,Xu Bingye.Prediction and control of wellbore trajectory[M].Dongying:China University of Petroleum Press,1994:1-259.
[11]高德利.油气钻井工程力学进展-刘希圣教授70寿辰暨执教45周年纪念文集[M].东营:石油大学出版社,1996:1-226.Gao Deli.Advances in oil-gas wells drilling engineering mechanics-Professor Liu Xisheng 70 birthday cum coached 45 anniver-sary anthology[M].Dongying:China University of Petroleum Press,1996:1-226.
[12]高德利.油气井管柱力学与工程[M].东营:中国石油大学出版社,2006:1-316.Gao Deli.Down-hole tubular mechanics and its applications[M].Dongying:China University of Petroleum Press,2006:1-316.
[13]李子丰.油气井杆管柱力学[M].北京:石油工业出版社,1996:1-145.Li Zifeng.Tubular mechanics in oil-gas wells[M].Beijing:Petroleum Industry Press,1996:1-145.
[14]李子丰.油气井杆管柱力学及应用[M].北京:石油工业出版社,2008:1-224.Li Zifeng.Tubular mechanics in oil-gas wells and its applications[M].Beijing:Petroleum Industry Press,2008:1-224.
[15]李鹤林.石油管工程[M].北京:石油工业出版社,1999:1-125.Li Helin.Oil pipe engineering[M].Beijing:Petroleum Industry Press,1999:1-125.
[16]李鹤林,李平全,冯耀荣.石油钻柱失效分析及预防[M].北京:石油工业出版社,1999:1-297.Li Helin,Li Pingquan,Feng Yaorong.Failure analysis and precaution of petroluem drill string[M].Beijing:Petroluem Industry Press,1999:1-297.
[17]董世民.抽油机井动态参数计算机仿真与系统优化[M].北京:石油工业出版社,2003:1-156.Dong Shimin.Computer simulation of dyanmic parameters of rodpumping system and system optimization[M].Beijing:Petroleum Industry Press,2003:1-156.
[18]姜伟.海洋石油钻井工程力学研究与实践[M].北京:石油工业出版社,2008:1-214.Jiang Wei.Study and practice in engineering mechanics of offshore petroleum drillilng[M].Beijing:Petroleum Industry Press,2008:1-214.
[19]刘清友,孟庆华,庞东晓.钻井系统动力学仿真研究及应用[M].北京:科学出版社,2009:1-202.Liu Qingyou,Meng Qinghua,Pang Dongxiao.Drilling system dynamics simulation and application[M].Beijing:Science Press,2009:1-202.
[20]刘清友,何玉发.深井注入管柱力学行为及应用[M].北京:科学出版社,2013:1-179.Liu Qingyou,He Yufa.Deep well injection tubular mechanical behavior and application[M].Beijing:Science Press,2013:1-179.
[21]韩志勇.液压环境下的油井管柱力学[M].北京:石油工业出版社,2011:1-308.Han Zhiyong.Tubular mechanics in oil wells under hydraulic environment[M].Beijing:Petroleum Industry Press,2011:1-308.
[22]刘巨保,岳欠杯.石油钻采管柱力学[M].北京:石油工业出版社,2011:1-279.Liu Jubao,Yue Qianbei.Oil drilling&production pipe string mechanics[M].Beijing:Petroleum Industry Press,2011:1-279.
[23]刘巨保.石油钻采管柱力学[M].哈尔滨:黑龙江大学出版社,2012:1-433.Liu Jubao.Oil drilling&production pipe string mechanics[M].Harbin:Heilongjiang University Press,2012:1-433.
[24]Gibbs S G.Rod pumping:modern methods of design,diagnosis and surveillance[M].La Habra,Califoria:Theta Oilfield Services,Inc.,2012:1-660.
[25]郝俊芳,龚伟安.套管强度计算与设计[M].北京:石油工业出版社,1987:1-264.Hao Junfang,Gong Wei'an.Casing strength compuation and design[M].Beijing:Petroleum Industry Press,1987:1-264.
[26]于永南.钻柱力学分析的有限单元法[M].北京:石油大学出版社,1998:1-132.Yu Yongnan.Finite element method for drill string mechanical analysis[M].Beijing:China University of Petroleum Press,1998:1-132.
[27]章扬烈.钻柱运动学与动力学[M].北京:石油工业出版社,2001:1-121.Zhang Yanglie.Drillstring kinematics and dynamics[M].Beijing:Petroleum Industry Press,2001:1-121.
[28]李志明,殷有泉.油水井套管外挤力计算及其力学基础[M].北京:石油工业出版社,2006:1-153.Li Zhiming,Yin Youquan.Oil and water well casing external pressure computation and its mechanics foundation[M].Beijing:Petoleum Industry Press,2006:1-153.
[29]练章华.地应力与套管损害机理[M].北京:石油工业出版社,2009:1-197.Lian Zhanghua.In-situ stress and casing damage mechanism[M].Beijing:Petroleum Industry Press,2009:1-197.
[30]Samuel G R.Formulas and calculations for drilling operations[M].Hoboken:Scrivener,2010:205-252.
[31]吕苗荣.石油工程管柱力学[M].北京:中国石化出版社,2012:1-181.LüMiaorong.Tubular mechanics in petroleum engineering[M].Beijing:China Petrochemical Press,2012:1-181.
[32]黄桢,李鹭光,胡桂川.天然气井油管柱疲劳寿命预测[M].重庆:重庆大学出版社,2012:1-246.Huang Zhen,Li Luguang,Hu Guichuan.Gas well tubing string fatigue life prediction[M].Chongqing:Chongqing University Press,2012:1-246.
[33]徐秉业.弹性与塑性力学-例题和习题[M].北京:机械工业出版社,1981:1-632.Xu Bingye.Elastic-plastic mechanics-examples and exercises[M].Beijing:China Machine Press,1981:1-632.
[34]狄勤丰.旋转导向井下闭环钻井技术[M].西安:陕西科学技术出版社,1999.Di Qinfeng.Rotary closed-loop drilling technology[M].Xi'an:Shannxi Science and Technology Press,1999.
[35]李子丰,梁尔国.钻柱力学研究现状及进展[J].石油钻采工艺,2008,30(2):1-9.Li Zifeng,Liang Erguo.Research and development of drill string mechanics[J].Oil Drilling&Production Technology,2008,30(2):1-9.
[36]李子丰,蔡雨田,李冬梅,等.地层测试管柱力学分析[J].石油学报,2011,32(4):709-716.Li Zifeng,Cai Yutian,Li Dongmei,et al.Mechanical analysis ofpipe string in formation testing[J].Acta Petrolei Sinica,2011,32(4):709-716.
[37]李子丰.油气井杆管柱的稳定性与纵横弯曲[J].西部探矿工程,1997,9(2):23-25.Li Zifeng.Stability and criss cross curving of pipe pile of oil gas well[J].West-China Exploration Engineering,1997,9(2):23-25.
[38]高德利,刘希圣,徐秉业.钻柱力学研究的若干基本问题[C]∥中国石油工程学会钻井基础理论研讨会.大庆:中国石油工程学会,1992.Gao Deli,Liu Xisheng,Xu Bingye.Some essential questions of drill string mechanics research[C]∥Chinese Society of Petroleum Engineering Drilling Theoretical Seminar.Daqing:Chinese Society of Petroleum Engineering,1992.
[39]李子丰,马兴瑞,黄文虎.油气井杆管柱动力学基本方程[J].力学与实践,1995,17(1):40-42.Li Zifeng,Ma Xingrui,Huang Wenhu.Fundamental equations for dynamical analysis to the pipe in an oil and gas well[J].Mechanics in Engineering,1995,17(1):40-42.
[40]李子丰,马兴瑞,黄文虎.钻柱力学基本方程及其应用[J].力学学报,1995,27(4):406-414.Li Zifeng,Ma Xingrui,Huang Wenhu.A general formulation of drill stem mechanics and its applications[J].Acta Mechanica Sinica,1995,27(4):406-414.
[41]李子丰,李敬元,马兴瑞,等.油气井杆管柱动力学基本方程及应用[J].石油学报,1999,20(3):87-90.Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells[J].Acta Petrolei Sinica,1999,20(3):87-90.
[42]Li Zifeng,Li Jingyuan.Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis[J].Journal of Canadian Petroleum Technology,2002,41(5):44-53.
[43]Lubinski A.A Study of the buckling of rotary drilling strings[R].New York:American Petroleum Institute,1950:178-214.
[44]Paslay P R,Bogy D B.The stability of a circular rod laterally constrained to be in contact with an inclined circular cylinder[J].Journal of Applied Mechanics,1964,31(4):605-610.
[45]Dawson R.Drill pipe buckling in inclined holes[J].Journal of Petroleum Technology,1984,36(10):1734-1738.
[46]Mitchell R F.Buckling behavior of well tubing:the packer effect[J].Society of Petroleum Engineers Journal,1982,22(5):616-624.
[47]Mitchell R F.New concepts for helical buckling[J].SPE Drilling Engineering,1988,3(3):303-310.
[48]Mitchell R F.Simple frictional analysis of helical buckling of tubing[J].SPE Drilling Engineering,1986,1(6):457-465.
[49]Chen Yuche,Lin Y H,Cheatham J B.Tubing and casing buckling in horizontal wells(includes associated papers 21257 and21308)[J].Journal of Petroleum Technology,1990,42(2):140-191.
[50]李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的线性弯曲[J].哈尔滨工业大学学报,1994,26(1):96-100.Li Zifeng,Ma Xingrui,Huang Wenhu.The buckling of a circular rod or pipe laterally constrained to be contact with a horizontal circular cylinder[J].Journal of Harbin Institute of Technology,1994,26(1):96-100.
[51]李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的几何非线性弯曲[J].力学与实践,1994,16(3):16-18.Li Zifeng,Ma Xingrui,Huang Wenhu.Geometrically nonlinear bending of slender bar(tube)under compression torsion loading in a horizontal pipe[J].Mechanics in Engineering,1994,16(3):16-18.
[52]李子丰,马兴瑞,黄文虎.油气井杆管柱的静力稳定性[J].工程力学,1997,14(1):17-25.Li Zifeng,Ma Xingrui,Huang Wenhu.Static stability of pipe string in oil and gas wells[J].Engineering Mechanics,1997,14(1):17-25.
[53]Li Zifeng.Static buckling of rod and pipe string in oil and gas wells[R].SPE57013,1999.
[54]Gao Deli,Liu Fengwu.The post-buckling behavior of a tubular string in an inclined wellbore[J].Computer Modeling in Engineering&Sciences,2013,90(1):17-36.
[55]Huang Wenjun,Gao Deli.Sinusoidal buckling of a thin rod with connectors constrained in a cylinder[J].Journal of Natural Gas Science and Engineering,2014,18:237-246.
[56]Huang Wenjun,Gao Deli,Wei Shaolei,et al.Boundary conditions:a key factor in tubular-string buckling[J].SPE Journal,2015,20(6):1409-1420.
[57]Huang Wenjun,Gao Deli,Liu,Fengwu.Buckling analysis of tubular strings in horizontal wells[J].SPE Journal,2015,20(2):405-416.
[58]Huang Wenjun,Gao Deli.Helical buckling of a thin rod with connectors constrained in a torus[J].International Journal of Mechanical Sciences,2015,98:14-28.
[59]刘峰,王鑫伟.等曲率井中有重钻柱屈曲的非线性有限元分析[J].力学学报,2005,37(5):593-599.Liu Feng,Wang Xinwei.Nonlinear finite element buckling analysis of tubing with weight in constant-curvature wells[J].Chinese Journal of Theoretical and Applied Mechanics,2005,37(5):593-599.
[60]刘峰,王鑫伟,甘立飞.基于有限元分析的直井中钻柱螺旋屈曲临界载荷定义[J].工程力学,2007,24(1):173-177.Liu Feng,Wang Xinwei,Gan Lifei.The definition of helical buckling critical load of tubing in straight wells based on the finite element analysis[J].Engineering Mechanics,2007,24(1):173-177.
[61]袁张贤,王鑫伟.斜直圆筒内基于Euler-Rodrigues参数的细长杆螺旋屈曲研究[J].计算物理,2012,29(4):549-556.Yuan Zhangxian,Wang Xinwei.Helix buckling of a slender rod in inclined cylinder:analysis with Euler-Rodrigues parameters[J].Chinese Journal of Computational Physics,2012,29(4):549-556.
[62]龚伟安.压不弯杆件的室内模拟试验及其应用前景[J].力学与实践,1996,18(2):43-46.Gong Wei’an.Indoor simulation experiment of unbending drillcollar and application prospect[J].Mechanics in Engineering,1996,18(2):43-46.
[63]龚伟安.压不弯钻铤装置的理论探索[J].石油学报,1997,18(3):115-118.Gong Wei’an.Theoretical analysis and simulating test of unben-ding drill-collar[J].Acta Petrolei Sinica,1997,18(3):115-118.
[64]龚伟安,拓佰民,沈亚鹏,等.不弯曲钻铤的室内试验及现场试验的效果分析[J].石油钻采工艺,1999,21(3):1-9.Gong Wei’an,Tuo Baimin,Shen Yapeng,et al.Analysis on lab and on-site testing results for unbending drill collar[J].Oil Drilling&Production Technology,1999,21(3):1-9.
[65]李子丰.“压不弯钻铤”缺乏理论基础[J].石油学报,1999,20(5):82-83.Li Zifeng.Unbending drill-collar lack of theoretical basis[J].Acta Petrolei Sinica,1999,20(5):82-83.
[66]焦永树,蔡宗熙,严宗达.铅垂井段钻柱的浑沌运动[J].振动工程学报,2000,13(2):314-318.Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of a drillstring in vertical section[J].Journal of Vibration Engineering,2000,13(2):314-318.
[67]焦永树,蔡宗熙,严宗达.铅垂井段钻柱的动力分岔研究[J].石油学报,2000,21(5):86-90.Jiao Yongshu,Cai Zongxi,Yan Zongda.Dynamic bifurcation of the drillstring in vertical section[J].Acta Petrolei Sinica,2000,21(5):86-90.
[68]王正湖,孟祥玉,曹锡玲,等.垂直井中旋转钻柱受拉段分岔研究[J].石油大学学报:自然科学版,2001,25(2):13-15.Wang Zhenghu,Meng Xiangyu,Cao Xiling,et al.Study on bifurcation for tensile-rotating drillstring in vertical section of well[J].Journal of the University of Petroleum,China:Edition of Natural Science,2001,25(2):13-15.
[69]焦永树,蔡宗熙,严宗达.井孔约束下水平井段钻柱的浑沌运动[J].固体力学学报,2001,22(1):64-68.Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of the drillstring constrained by borehole in horizontal section[J].Acta Mechanica Solida Sinica,2001,22(1):64-68.
[70]李子丰.近期国内钻柱静动力分岔研究及存在问题[J].石油机械,2004,32(6):68-70.Li Zifeng.Some problems in the recent research of drillstring bifurcation[J].China Petroleum Machinery,2004,32(6):68-70.
[71]宋执武,高德利.受拉钻铤结构及其防斜减振原理[J].西部探矿工程,2007,19(7):64-65.Song Zhiwu,Gao Deli.The configuration of tensioned collar and its function of deviation control and vibration diminish[J].West-China Exploration Engineering,2007,19(7):64-65.
[72]李子丰.内外压力对油井管柱等效轴向力及稳定性的影响[J].中国石油大学学报:自然科学版,2011,35(1):65-67.Li Zifeng.Influence of internal and external pressure on equivalent axis force and stability of pipe string in oil wells[J].Journal of China University of Petroleum:Edition of Natural Science,2011,35(1):65-67.
[73]Li Zifeng.Using the fictitious force to judge the stability of pipe string is wrong[J].The Open Petroleum Engineering Journal,2013,6(1):57-60.
[74]韩志勇.关于内外压力对油井管柱轴向力和稳定性影响问题的讨论[J].石油钻探技术,2013,41(6):12-18.Han Zhiyong.Discussion on effects of internal and external pressure on axial force and stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2013,41(6):12-18.
[75]韩志勇.关于内外压力对油井管柱稳定性影响问题的再讨论[J].石油钻探技术,2014,42(4):14-20.Han Zhiyong.Re-discussion on effects of internal and external pressures on stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2014,42(4):14-20.
[76]Sun Youhong,Yu Yongping,Liu Baochang.A simple and accurate numeric solution procedure for nonlinear buckling model of drill string with frictional effect[J].Journal of Petroleum Science and Engineering,2015,128:44-52.
[77]Sun Youhong,Yu Yongping,Liu Baochang.Closed form solutions for predicting static and dynamic buckling behaviors of a drillstring in a horizontal well[J].European Journal of Mechanics-A/Solids,2015,49:362-372.
[78]Katz S,Givli S.The post-buckling behavior of a beam constrained by springy walls[J].Journal of the Mechanics and Physics of Solids,2015,78:443-466.
[79]Johancsik C A,Friesen D B,Dawson R.Torque and drag in directional wells-prediction and measurement[R].SPE 11380,1984.
[80]Sheppard M C,Wick C,Burgess T.Designing well paths to reduce drag and torque[R].SPE15463,1987.
[81]Ho H S.An improved modeling program for computing the torque and drag in directional and deep wells[R].SPE18047,1988.
[82]李子丰,刘希圣.水平井钻柱稳态拉力—扭矩模型及其应用[J].石油钻探技术,1992,20(4):1-6.Li Zifeng,Liu Xisheng.Steady tension-torque model for drillstring in horizontal wells and its application[J].Petroleum Drilling Techniques,1992,20(4):1-6.
[83]Li Zifeng,Liu Xisheng,Zhou Daqian,et al.A steady tensiontorque model for drillstring in horizontal wells[R].SPE26295,1993.
[84]李子丰,李相方,单志刚.海底大位移井井眼净化程度和卡钻可能性监测[J].石油钻探技术,2000,28(5):4-6.Li Zifeng,Li Xiangfang,Shan Zhigang.Monitoring wellbore cleaning degree and sticking possibility in offshore extended wells[J].Petroleum Drilling Techniques,2000,28(5):4-6.
[85]李子丰,李敬媛,孔凡君.钻柱拉力—扭矩模型述评[J].石油机械,1993,21(8):43-46.Li Zifeng.Li Jingyuan,Kong Fanjun.Comment on tensiontorque model of drillstrings[J].China Petroleum Machinery,1993,21(8):43-46.
[86]李子丰,蒋恕,阳鑫军.油气井杆管柱力学研究现状和发展方向[J].石油机械,2002,30(12):30-33.Li Zifeng,Jiangshu,Yang Xinjun.Current status and developing trend of mechanical study of rod and pipe strings in oil and gas wells[J].China Petroleum Machinery,2002,30(12):30-33.
[87]Tikhonov V,Valiullin K,Nurgaleev A,et al.Dynamic model for stiff-string torque and drag(see associated supplementary discussion)[J].SPE Drilling&Completion,2014,29(3):279-294.
[88]Li Zifeng.Comments on“dynamic model for stiff-string torque and drag”[published by Tikhonov,Vadim;Valiullin,Khaydar;Nurgaleev,Albert;Ring,Lev;Gandikota,Raju;Chaguine,Pavel;Cheatham,Curtis,SPE Drill.Compl.29(3)279-294][J].Journal of Petroleum Science and Engineering,2015,133:824-825.
[89]杨勇,邵兵,王风锐,等.复杂结构井管柱力学模型及动态三维数字井筒[J].石油学报,2015,36(3):385-394.Yang Yong,Shao Bing,Wang Fengrui,et al.String mechanical model for complex-structure wells and dynamic 3D digital shaft[J].Acta Petrolei Sinica,2015,36(3):385-394.
[90]张学鸿,陈抡元,刘巨保.整体钻柱力学接触有限元分析[J].石油学报,1992,13(3):102-108.Zhang Xuehong,Chen Lunyuan,Liu Jubao.Finite element analysis of the contact and friction of a whole drillpipe string[J].Acta Petrolei Sinica,1992,13(3):102-108.
[91]帅健,吕英民,蔡强康.全井中钻柱的有限元模型及应用[J].石油学报,1995,16(1):118-126.Shuai Jian,LüYingmin,Cai Qiangkang.Finite element model of the drill string in a whole well bore and its application[J].Acta Petrolei Sinica,1995,16(1):118-126.
[92]郭永峰,金晓剑,谭树人.非线性有限元法预测近海水平井钻进摩阻[J].中国造船,2003,44(2):61-66.Guo Yongfeng,Jin Xiaojian,Tan Shuren.Prediction of drilling drag and torque in horizontal wells of offshore oilfield by nonlinear FEM[J].Ship Building of China,2003,44(2):61-66.
[93]付建红,龚龙祥,胡顺渠,等.基于ANSYS的水平井下套管摩阻分析计算[J].石油钻采工艺,2007,29(4):32-35.Fu Jianhong,Gong Longxiang,Hu Shunqu,et al.Calculation of frictional drag of casing running in horizontal well based on ANSYS[J].Oil Drilling&Production Technology,2007,29(4):32-35.
[94]祝效华,童华,刘清友,等.基于钻柱系统动力学的摩阻扭矩计算新方法[J].系统仿真学报,2007,19(21):4853-4856.Zhu Xiaohua,Tong Hua,Liu Qingyou,et al.New method on calculation of torque and drag based on drilling string system dynamics[J].Journal of System Simulation,2007,19(21):4853-4856.
[95]付加胜,李根生,史怀忠,等.井下振动减摩技术研究进展[J].石油机械,2012,40(10):6-10.Fu Jiasheng,Li Gensheng,Shi Huaizhong,et al.Research progress of the downhole vibration antifriction technology[J].China Petroleum Machinery,2012,40(10):6-10.
[96]张云飞,贺会群,都亚男,等.连续管井下减阻器研究进展[J].石油机械,2015,43(7):36-41.Zhang Yunfei,He Huiqun,Du Ya’nan,et al.The development of downhole drag reduction device for coiled tubing[J].China Petroleum Machinery,2015,43(7):36-41.
[97]王鹏,倪红坚,王瑞和,等.基于微凸体接触的钻柱纵向振动减摩阻[J].中国石油大学学报:自然科学版,2015,39(1):88-94.Wang Peng,Ni Hongjian,Wang Ruihe,et al.Friction reduction research of drill-string longitudinal vibration based on asperity contact[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(1):88-94.
[98]李子丰,杨海滨,许春田,等.定向井滑动钻进送钻原理与技术[J].天然气工业,2013,33(12):94-98.Li Zifeng,Yang Haibin,Xu Chuntian,et al.Bit feed principles and technologies in slide-drilling directional wells[J].Natural Gas Industry,2013,33(12):94-98.
[99]Walker B H,Friedman M B.Three-dimensional force and deflection analysis of a variable cross section drill string[J].Journal of Pressure Vessel Technology,1977,99(2):367-373.
[100]Millheim K K,Apostal M C.The effect of bottomhole assembly dynamics on the trajectory of a bit[J].Journal of Petroleum Technology,1981,33(12):2323-2338.
[101]Ho H S.General formulation of drillstring under large deformation and its use in BHA analysis[R].SPE15562,1986.
[102]白家祉.应用纵横弯曲连续梁理论求解钻具组合的受力与变形[C]∥北京国际石油工程会议论文集.北京:北京国际石油工程,1982:67-69.Bai Jiazhi.Bottom hole assembly problems solved by beam-column theory[C]∥Beijing International Petroleum Engineering Conference Proceedings.Beijing:Beijing International Petroleum Engineering,1982:67-69.
[103]白家祉,林小敏.纵横弯曲法对钻具组合的二维分析[J].石油学报,1985,6(3):75-84.Bai Jiazhi,Lin Xiaomin.Two-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1985,6(3):75-84.
[104]白家祉,黄惠泽,刘玉石.纵横弯曲法对钻具组合的三维分析[J].石油学报,1989,10(2):60-66.Bai Jiazhi,Huang Huize,Liu Yushi.Three-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1989,10(2):60-66.
[105]苏义脑,白家祉.用纵横弯曲法对弯接头——井下动力钻具组合的三维分析[J].石油学报,1991,12(3):110-120.Su Yi'nao,Bai Jiazhi.Three-dimensional analysis of down hole motor with bent sub using beam-column theory[J].Acta Petrolei Sinica,1991,12(3):110-120.
[106]苏义脑,唐雪平,陈祖锡.初弯曲纵横弯曲梁的等效载荷法及其应用[J].力学与实践,2004,26(1):42-44.Su Yi’nao,Tang Xueping,Chen Zuxi.Equivalent loading method for solving beam-column with initial bending and its application in drilling engineering[J].Mechanics in Engineering,2004,26(1):42-44.
[107]刘希圣,高德利,崔孝秉.底部钻具组合三维静力分析的权余法[J].石油大学学报:自然科学版,1988,12(3):58-67.Liu Xisheng,Gao Deli,Cui Xiaobing.Weighted residuals method for Three-dimension static analysis of bottom hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1988,12(3):58-67.
[108]高德利.钻头与地层相互作用研究、BHA权余法分析及井眼轨迹控制技术[D].北京:石油大学,1990.Gao Deli.Research on rock-bit interaction,BHA weighted residuals method analysis and well path control[D].Beijing:University of Petroleum,China,1990.
[109]高德利,徐秉业.石油钻井底部钻具组合大挠度三维分析[J].应用力学学报,1995,12(1):53-62.Gao Deli,Xu Bingye.Three-dimensional analysis of the static behavior of BHA under large deflection[J].Chinese Journal of Applied Mechanics,1995,12(1):53-62.
[110]高德利.井眼轨迹控制问题的力学分析方法[J].石油学报,1996,17(1):115-121.Gao Deli.A mechanical model for prediction and control of the wellbore trajectory[J].Acta Petrolei Sinica,1996,17(1):115-121.
[111]郭宗禄,高德利,杨文强,等.下部钻具组合上切点的位置确定方法[J].石油钻探技术,2014,42(2):46-51.Guo Zonglu,Gao Deli,Yang Wenqiang,et al.A method for determining upper tangential point at bottomhole assembly[J].Petroleum Drilling Techniques,2014,42(2):46-51.
[112]李子丰.定向水平井钻柱拉力-扭矩模型、导向钻具大小挠度力学分析及轨迹控制理论[D].北京:石油大学,1992.Li Zifeng.A study drillstring tension and torque model in directional/horizontal wells,analysis of the steerable downhole motor assembly under large and small deflections,theory of drilling trajectory control[D].Beijing:University of Petroleum,China,1992.
[113]李子丰,刘希圣.导向钻具组合三维小挠度力学分析[J].石油钻探技术,1993,21(2):1-6.Li Zifeng,Liu Xisheng.3D mechanical analysis method of steering BHA under small defection[J].Petroleum Drilling Techniques,1993,21(2):1-6.
[114]李子丰,刘希圣.下部钻具三维大挠度静力分析[J].石油大学学报:自然科学版,1994,18(4):37-42.Li Zifeng,Liu Xisheng.Static behavior of bottom hole assembly under large defection in 3-D curved borehole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1994,18(4):37-42.
[115]李子丰,孙玉学,刘希圣.井眼轨迹预测的数学模型[J].大庆石油学院学报,1995,19(2):6-9.Li Zifeng,Sun Yuxue,Liu Xisheng.Mathematical model for predicting well bore trajectory[J].Journal of Daqing Petroleum Institute,1995,19(2):6-9.
[116]李子丰.井眼轨道控制理论[M].北京:石油工业出版社,1996:1-93.Li Zifeng.Theory of wellbore trajectory control[M].Beijing:Petroleum Industry Press,1996:1-93.
[117]Li Zifeng,Ma Xingrui,Huang Wenhu,et al.A3D analysis of a bottomhole assembly under large deflection[J].SPE Drilling&Completion,1996,11(2):104-110.
[118]李子丰,赵新瑞,赵德云.通用下部钻具三维小挠度静力分析的数学模型及应用[J].工程力学,2000,17(6):121-129.Li Zifeng,Zhao Xinrui,Zhao Deyun.A methematical model for 3D analysis of general bottomhole assembly under small deflection and its application[J].Engineering Mechanics,2000,17(6):121-129.
[119]赵金海,李子丰,张桂林,等.对不同轴式下部钻具组合动态特性的初探与思考[J].岩土力学,2003,24(S):392-394.Zhao Jinhai,Li Zifeng,Zhang Guilin,et al.A preliminary study on dynamic influencing factors for bottom-hole assembly with bending angle or bias axis[J].Rock and Soil Mechanics,2003,24(S):392-394.
[120]李子丰,赵金海,李敬元.旋转导向钻具三维小挠度稳态分析的数学模型[J].石油学报,2004,25(1):84-88.Li Zifeng,Zhao Jinhai,Li Jingyuan.Mathematical models for 3D analysis of rotary steering bottom hole assembly with small deflection[J].Acta Petrolei Sinica,2004,25(1):84-88.
[121]Li Zifeng,Li Jingyuan.Mathematical models for 3D analysis of rotary steering BHA under small deflection[J].Journal of Energy Resources Technology,2008,130(1):013101.
[122]李子丰,李敬媛.三维钻速方程及其反演模型[J].西部探矿工程,1994,6(2):8-11.Li Zifeng,Li Jingyuan.Three dimensional drilling yelocity equation and its reverse evolution model[J].West-China Exploration Engineering,1994,6(2):8-11.
[123]李敬元,李子丰.井眼轨道预测的实现[J].天然气工业,2005,25(5):62-64.Li Jingyuan,Li Zifeng.Realization of well path prediction[J].Natural Gas Industry,2005,25(5):62-64.
[124]李子丰.钻柱力学研究中几个值得探讨的问题[J].石油机械,1996,24(8):32-35.Li Zifeng.Some problems with study of drillstem mechanics[J].China Petroleum Machinery,1996,24(8):32-35.
[125]蒋恕,李子丰.钻头处的边界条件研究[J].石油钻采工艺,2001,23(4):34-35.Jiang Shu,Li Zifeng.Study on the bit boundary condition[J].Oil Drilling&Production Technology,2001,23(4):34-35.
[126]李子丰,李同林.传统底部钻具组合上切点边界条件的正确性[J].石油钻采工艺,2002,24(1):31-32.Li Zifeng,Li Tonglin.Accuracy of the boundary conditions at the upper tangent of the conventional BHA[J].Oil Drilling&Production Technology,2002,24(1):31-32.
[127]宋执武,高德利.不倒翁式偏心防斜钻具的设计[J].石油机械,2006,34(8):19-20.Song Zhiwu,Gao Deli.Design of a tumbler eccentric and deviation-controlled drilling tool[J].China Petroleum Machinery,2006,34(8):19-20.
[128]宋执武,高德利.自动防斜钻井钻具设计[J].钻采工艺,2007,30(3):1-2.Song Zhiwu,Gao Deli.Design of a drilling tool for vertical drilling automatically[J].Drilling&Production Technology,2007,30(3):1-2.
[129]帅健,蔡强康,吕英民.弯曲井眼中下部钻具组合的有限元分析[J].石油学报,1990,11(4):95-105.Shuai Jian,Cai Qiangkang,LüYingmin.Finite element analysis of BHA in a curved directional well[J].Acta Petrolei Sinica,1990,11(4):95-105.
[130]署恒木,吕英民,蔡强康.有限元法在底部钻具组合动态分析中的应用[J].石油大学学报:自然科学版,1990,14(6):54-61.Shu Hengmu,LüYingmin,Cai Qiangkang.Application of finite element method to dynamic analysis of bottom-hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1990,14(6):54-61.
[131]刘巨保,张学鸿,孙超,等.水平井BHA控制井斜与方位机理及影响因素分析[J].大庆石油学院学报,1997,21(4):68-72.Liu Jubao,Zhang Xuehong,Sun Chao,et al.Analysis of the theory and influence factors for the BHA to control inclination and azimuth in horizontal well[J].Journal of Daqing Petroleum Institute,1997,21(4):68-72.
[132]狄勤丰,王文昌,胡以宝,等.钻柱动力学研究及应用进展[J].天然气工业,2006,26(4):57-59.Di Qinfeng,Wang Wenchang,Hu Yibao,et al.Study and application of drilling string dynamics[J].Natural Gas Industry,2006,26(4):57-59.
[133]胡以宝,狄勤丰,邹海洋,等.钻柱动力学研究及监控技术新进展[J].石油钻探技术,2006,34(6):7-10.Hu Yibao,Di Qinfeng,Zou Haiyang,et al.The new developments of monitoring technology and researches on drill string dynamics[J].Petroleum Drilling Techniques,2006,34(6):7-10.
[134]Wolf S F,Zacksenhouse M,Arian A.Field measurements of downhole drillstring vibrations[R].SPE14330,1985.
[135]Dunayevsky V A,Abbassian F,Judzis A.Dynamic stability of drillstrings under fluctuating weight on bit[R].SPE 14329,1993.
[136]Rey-Fabret I,Mabile M C,Oudin N.Detecting whirling behaviour of the drill string from surface measurements[R].SPE38587,1997.
[137]Jansen J D.Whirl and chaotic motion of stabilized drill collars[R].SPE20930,1992.
[138]章扬烈,肖载阳,端木纲.旋转钻柱运动原理的研究[J].石油矿场机械,1988,17(2):1-7.Zhang Yanglie,Xiao Zaiyang,Duanmu Gang.Research on rotary drill string movement principle[J].Oil Field Equipment,1988,17(2):1-7.
[139]张广清,陈勉,路永明.斜直井段旋转钻柱稳定性试验研究[J].石油钻采工艺,2001,23(1):23-25.Zhang Guangqing,Chen Mian,Lu Yongming.Test study on drilling stem stability of rotary drilling in the slant hole[J].Oil Drilling&Production Technology,2001,23(1):23-25.
[140]管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2003,24(6):102-106.Guan Zhichuan,Jin Yanxin,Wang Yifa.Experimental research on motion behavior of bottom drill string in straight hole[J].Acta Petrolei Sinica,2003,24(6):102-106.
[141]史玉才,王军,朱江,等.下部钻柱反向涡动机理研究[J].石油钻探技术,2007,35(5):43-45.Shi Yucai,Wang Jun,Zhu Jiang,et al.Research on backward whirling mechanism of bottom drillstring[J].Petroleum Drilling Techniques,2007,35(5):43-45.
[142]管志川,邵冬冬,温欣,等.水平井眼中旋转钻柱运动特性的实验研究[J].工程力学,2013,30(5):340-345.Guan Zhichuan,Shao Dongdong,Wen Xin,et al.Experimental research on motion states of bottom drilling string in horizontal well[J].Engineering Mechanics,2013,30(5):340-345.
[143]邵冬冬,管志川,温欣,等.水平旋转钻柱横向振动特性试验[J].中国石油大学学报:自然科学版,2013,37(4):100-103.Shao Dongdong,Guan Zhichuan,Wen Xin,et al.Experiment on lateral vibration characteristics of horizontal rotary drilling string[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(4):100-103.
[144]李子丰,王兆运,阳鑫军,等.钻柱涡动分析及防涡稳定器设计[J].石油钻采工艺,2008,30(3):124-127.Li Zifeng,Wang Zhaoyun,Yang Xinjun,et al.Swirling analysis of drilling strings and anti-whirl stabilizers design[J].Oil Drilling&Production Technology,2008,30(3):124-127.
[145]高岩.三牙轮钻头钻进时钻柱轴向振动的特征[J].石油学报,2000,21(6):93-96.Gao Yan.Axial vibration performance of drill string when drilling with three-cone bit[J].Acta Petrolei Sinica,2000,21(6):93-96.
[146]王珍应,徐铭陶.钻柱纵向受迫振动的广义传递矩阵法[J].石油学报,1990,11(3):107-114.Wang Zhenying,Xu Mingtao.Computing forced longitudinal vibration of drill string by generalized transfer matrix method[J].Acta Petrolei Sinica,1990,11(3):107-114.
[147]刘清友,马德坤,汤小文.钻柱纵向振动模型的建立及求解方法[J].西南石油学院学报,1998,20(4):55-58.Liu Qingyou,Ma Dekun,Tang Xiaowen.The method of solution and establishment for axial vibration model of drilling string[J].Journal of Southwest Petroleum Institute,1998,20(4):55-58.
[148]刘清友,马德坤,钟青.钻柱扭转振动模型的建立及求解[J].石油学报,2000,21(2):78-82.Liu Qingyou,Ma Dekun,Zhong Qing.A drilling string torsional vibration model and its solution[J].Acta Petrolei Sinica,2000,21(2):78-82.
[149]吴泽兵,马德坤,况雨春.钻柱纵向振动仿真分析[J].石油学报,2000,21(3):73-76.Wu Zebing,Ma Dekun,Kuang Yuchun.Simulation of drill string’s longitudinal vibration[J].Acta Petrolei Sinica,2000,21(3):73-76.
[150]李子丰,于成金,李敬元.钻柱耦合振动[J].石油钻探技术,1992,20(2):16-17.Li Zifeng,Yu Chengjin,Li Jingyuan.Drillstring coupled vibration[J].Petroleum Drilling Techniques,1992,20(2):16-17.
[151]李子丰,李志刚.钻柱纵向振动分析[J].天然气工业,2004,24(6):70-73.Li Zifeng,Li Zhigang.Analysis of longitudinal vibration of drillstring[J].Natural Gas Industry,2004,24(6):70-73.
[152]李子丰,张永贵,侯绪田,等.钻柱纵向和扭转振动分析[J].工程力学,2004,21(6):203-210.Li Zifeng,Zhang Yonggui,Hou Xutian,et al.Analysis of longitudinal and torsion vibration of drillstring[J].Engineering Mechanics,2004,21(6):203-210.
[153]Li Zifeng,Guo Boyun.Analysis of longitudinal vibration of drill string in air and gas drilling[R].SPE107697,2007.
[154]王文龙,李子丰.不同激振条件下减振器对钻柱纵向振动的影响[J].工程力学,2011,28(4):221-225.Wang Wenlong,Li Zifeng.Influence of shock absorber on longitudinal vibration of drill string under different vibration inducing conditions[J].Engineering Mechanics,2011,28(4):221-225.
[155]李子丰.对“钻柱纵向振动分析”一文的质疑[J].石油钻探技术,1989,17(1):62.Li Zifeng.Comments on“drill string longitudinal vibration analysis”[J].Petroleum Drilling Techniques,1989,17(1):62.
[156]王文龙,胡群爱,刘化伟,等.钻柱纵向振动分析与应用[J].振动与冲击,2011,30(6):229-233.Wang Wenlong,Hu Qun’ai,Liu Huawei,et al.Analysis on longitudinal vibration of drill string and the corresponding application[J].Journal of Vibration and Shock,2011,30(6):229-233.
[157]Liu Xianbo,Vlajic N,Long Xinhua,et al.Nonlinear motions of a flexible rotor with a drill bit:stick-slip and delay effects[J].Nonlinear Dynamics,2013,72(1/2):61-77.
[158]Liu Xianbo,Vlajic N,Long Xinhua,et al.Coupled axial-torsional dynamics in rotary drilling with state-dependent delay:stability and control[J].Nonlinear Dynamics,2014,78(3):1891-1906.
[159]Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(10):051008.
[160]Burgess T M,McDaniel G L,Das P K.Improving BHA tool reliability with drillstring vibration models:field experience and limitations[R].SPE16109,1987.
[161]Dykstra M W,Chen D C K,Warren T M,et al.Drillstring component mass imbalance:a major source of downhole vibrations[R].SPE29350,1996.
[162]Dykstra M W,Chen D C K,Warren T M.Experimental evaluations of drill bit and drill string dynamics[R].SPE28323,1994.
[163]Heisig G,Neubert M.Lateral drillstring vibrations in extendedreach wells[R].SPE59235,2000.
[164]Liao C M,Balachandran B,Karkoub M,et al.Drill-string dynamics:reduced-order models and experimental studies[J].Journal of Vibration and Acoustics,2011,133(4):041008.
[165]Liao C M,Vlajic N,Karki H,et al.Parametric studies on drillstring motions[J].International Journal of Mechanical Sciences,2012,54(1):260-268.
[166]Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-stringvibration[J].Journal of Sound and Vibration,2013,332(10):2575-2592.
[167]Vlajic N,Liao C M,Karki H,et al.Draft:stick-slip motions of a rotor-stator system[J].Journal of Vibration and Acoustics,2013,136(2):021005.
[168]Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(5):051008.
[169]Chatjigeorgiou I K.Numerical simulation of the chaotic lateral vibrations of long rotating beams[J].Applied Mathematics and Computation,2013,219(10):5592-5612.
[170]Thompson J M T,van der Heijden G H M.A graphical criterion for the instability of elastic equilibria under multiple loads:with applications to drill-strings[J].International Journal of Mechanical Sciences,2013,68:160-170.
[171]Vlajic N,Fitzgerald T,Nguyen V,et al.Geometrically exact planar beams with initial pre-stress and large curvature:static configurations,natural frequencies,and mode shapes[J].International Journal of Solids and Structures,2014,51(19/20):3361-3371.
[172]姚建林,狄勤丰,胡以宝,等.空气钻井斜直井眼中钻柱的动力学特性及失效机理[J].中国石油大学学报:自然科学版,2008,32(3):63-67.Yao Jianlin,Di Qinfeng,Hu Yibao,et al.Dynamic characteristics and failure mechanism of drill string in straight hole with air drilling[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):63-67.
[173]狄勤丰,朱卫平,姚建林,等.空气钻井钻具组合动力学特征及井斜机理研究[J].石油学报,2008,29(6):917-921.Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic features of bottom hole assembly and borehole deviation mechanism in air drilling[J].Acta Petrolei Sinica,2008,29(6):917-921.
[174]狄勤丰,王文昌,姚永汉,等.底部钻具组合动力学模型及涡动特性仿真[J].中国石油大学学报:自然科学版,2010,34(3):53-56.Di Qinfeng,Wang Wenchang,Yao Yonghan,et al.Dynamics model and whirl features’simulation of bottom hole assembly[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(3):53-56.
[175]胡以宝,狄勤丰,王文昌,等.斜直井眼中转速对钻柱动力学特性的影响[J].工程力学,2010,27(5):184-190.Hu Yibao,Di Qinfeng,Wang Wenchang,et al.Influence of rotary table speed on the dynamic characteristics of drillsting in inclined straight hole[J].Engineering Mechanics,2010,27(5):184-190.
[176]罗敏.管道内旋转细长梁固液耦合动力学分析[D].大庆:大庆石油学院,2009.Luo Min.Fluid-structure interaction dynamic analysis of rotary slender beam in pipe[D].Daqing:Daqing Petroleum Institute,2009.
[177]张强,刘巨保,罗敏,等.圆筒内旋转细长管与流体界面耦合的数值方法[J].计算力学学报,2011,28(4):601-606.Zhang Qiang,Liu Jubao,Luo Min,et al.Numerical simulation on interface coupling of rotary slender pipe and fluid in cylinder[J].Chinese Journal of Computational Mechanics,2011,28(4):601-606.
[178]刘巨保,罗敏,王琳,等.管道内旋转细长梁的固液耦合方法研究[J].工程力学,2011,28(4):251-256.Liu Jubao,Luo Min,Wang Lin,et al.Methodology of fluidstructure interaction of rotary slender beam in pipe[J].Engineering Mechanics,2011,28(4):251-256.
[179]祝效华,刘清友,童华.三维井眼全井钻柱系统动力学模型研究[J].石油学报,2008,29(2):288-291.Zhu Xiaohua,Liu Qingyou,Tong Hua.Research on dynamics model of full hole drilling-string system with three-dimensional trajectory[J].Acta Petrolei Sinica,2008,29(2):288-291.
[180]祝效华,贾彦杰,童华.气体钻井钻柱振动特性及控制措施[J].石油学报,2012,33(2):293-297.Zhu Xiaohua,Jia Yanjie,Tong Hua.Vibrating characteristics of drill string in gas drilling and its control measures[J].Acta Petrolei Sinica,2012,33(2):293-297.
[181]祝效华,胡志强.基于钻头破岩钻进的下部钻具横向振动特性研究[J].振动与冲击,2014,33(17):90-93.Zhu Xiaohua,Hu Zhiqiang.Lateral vibration characteristics analysis of a bottom hole assembly based on interaction between bit and rock[J].Journal of Vibration and Shock,2014,33(17):90-93.
[182]屈展,张绍槐.内含钻井液的钻柱涡动动力特性分析[J].天然气工业,1994,14(1):46-48.Qu Zhan,Zhang Shaohuai.Analysing dynamic characteristics of drilling string eddy of inside containing drill fluid[J].Natural Gas Industry,1994,14(1):46-48.
[183]屈展.钻井液流体力引起旋转石油钻柱涡动的理论分析[J].力学与实践,1994,16(3):49-51.Qu Zhan.Theoretical analysis of drilling fluid cause rotary drill string whirl[J].Mechanics in Engineering,1994,16(3):49-51.
[184]屈展,徐健学.内外钻井液作用下的旋转钻柱涡动分析[J].西安石油学院学报:自然科学版,1997,12(1):27-29.Qu Zhan,Xu Jianxue.Whirling analysis of the rotary drill string by the action of drilling fluid inside and outside the drill string[J].Journal of Xi'an Petroleum Institute:Natural Science Edition,1997,12(1):27-29.
[185]肖文生,张扬,钟毅芳.钻柱在钻井液和井壁摩阻共同作用下的涡动[J].中国机械工程,2004,15(4):334-338.Xiao Wensheng,Zhang Yang,Zhong Yifang.Annulus whirling motion analysis of the rotary drill string under the actions of rubs between well-walls and drilling fluids[J].China Mechanical Engineering,2004,15(4):334-338.
[186]李子丰,李敬元,马兴瑞,等.钻柱自转和公转诱发牛顿液体层流流动的数学模型[J].力学与实践,1995,17(5):51-52.Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Mathematical model of Newton liquid laminar flow induced by drillstring rotation and revolution[J].Mechanics in Engineering,1995,17(5):51-52.
[187]崔海清,刘希圣.幂律流体偏心环空螺旋流中的二次流问题[J].水动力学研究与进展,1995,10(6):610-620.Cui Haiqing,Liu Xisheng.On the secondary flow in the helical flow of the power-law fluids in eccentric annuli[J].Journal of Hydrodynamics,1995,10(6):610-620.
[188]崔海清,刘希圣.非牛顿流体偏心环形空间螺旋流的速度分布[J].石油学报,1996,17(2):76-83.Cui Haiqing,Liu Xisheng.Velocity distribution of helical flow of non-Newtonian fluid in eccentric annuli[J].Acta Petrolei Sinica,1996,17(2):76-83.
[189]崔海清,季海军,蔡萌,等.流体在内管做行星运动的环空中流动的二次流[J].大庆石油学院学报,2005,29(2):16-18.Cui Haiqing,Ji Haijun,Cai Meng,et al.The secondary flow in Newtonian fluid flow in annulus with the inner cylinder executing aplanetary motion[J].Journal of Daqing Petroleum Institute,2005,29(2):16-18.
[190]崔海清,裴晓含,蔡萌.幂律流体在内管做行星运动的环空中流动的二次流[J].石油学报,2007,28(1):134-138.Cui Haiqing,Pei Xiaohan,Cai Meng.Secondary flow of powerlaw fluid flow in annulus with inner cylinder executing aplanetary motion[J].Acta Petrolei Sinica,2007,28(1):134-138.
[191]崔海清,修德艳,裴晓含,等.幂律流体在内管做行星运动的环空中流动时的内管法向应力分布[J].中国石油大学学报:自然科学版,2007,31(1):67-71.Cui Haiqing,Xiu Deyan,Pei Xiaohan,et al.Normal stress distribution on the inner cylinder forced by power law fluid flowing in annulus with inner cylinder executing aplanetary motion[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):67-71.
[192]李子丰.钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合[J].石油学报,2013,34(3):607-610.Li Zifeng.An inevitable way in drill-string whirling research:Combination of drilling fluid power lubrication with drill string dynamics[J].Acta Petrolei Sinica,2013,34(3):607-610.
[193]Yigit A S,Christoforou A P.Coupled axial and transverse vibrations of oilwell drillstrings[J].Journal of Sound and Vibration,1996,195(4):617-627.
[194]Christoforou A P,Yigit A S.Active control of stick-slip vibrations:the role of fully coupled dynamics[R].SPE68093,2001.
[195]Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-string vibration[J].Journal of Sound and Vibration,2013,332:2575-2592.
[196]Nandakumar K,Wiercigroch M.Galerkin projections for statedependent delay differential equations with applications to drilling[J].Applied Mathematical Modeling,2013,37:1705-1722.
[197]Divenyi S,Savi MA,Wiercigroch M,et al.Drill-string vibration analysis using non-smooth dynamics approach[J].Nonlinear Dynamics,2012,70:1017-1035.
[198]Kapitaniak M,Hamaneh VV,Chávez JP,et al.Unveiling complexity of drill-string vibrations:Experiments and modeling[J].International Journal of Mechanical Sciences,2015,101-102:324-327.
[199]狄勤丰,吴玉禄,石向前.预弯曲动力学防斜打快技术初探[J].石油学报,2003,24(3):86-89.Di Qinfeng,Wu Yulu,Shi Xiangqian.Primary research on vertical and fast drilling technology with pre-bending dynamic method[J].Acta Petrolei Sinica,2003,24(3):86-89.
[200]狄勤丰,朱卫平,姚建林,等.预弯曲动力学防斜打快钻具组合动力学模型[J].石油学报,2007,28(6):118-121.Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic model of bottom hole assembly used in pre-bending dynamic vertical and fast drilling technology[J].Acta Petrolei Sinica,2007,28(6):118-121.
[201]李子丰,赵金海,蒋恕.公转下部钻具受力与轨道控制的初步分析[J].石油钻采工艺,2003,25(6):35-37.Li Zifeng,Zhao Jinhai,Jiang Shu.Preliminary study on influencing factors of the forces and trajectory control for bottom-hole assembly[J].Oil Drilling&Production Technology,2003,25(6):35-37.
[202]Ritto T G,Escalante M R,Sampaio R,et al.Drill-string horizontal dynamics with uncertainty on the frictional force[J].Journal of Sound and Vibration,2013,332(1):145-153.
[203]Ritto T G,Sampaio R.Measuring the efficiency of vertical drillstrings:a vibration perspective[J].Mechanics Research Communications,2013,52:32-39.
[204]Ritto T G.Bayesian approach to identify the bit-rock interaction parameters of a drill-string dynamical model[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2015,37(4):1173-1182.
[205]李茂华,徐守余,牛卫东.套管损坏建模方法简述[J].石油机械,2008,36(4):76-80.Li Maohua,Xu Shouyu,Niu Weidong.Modeling approach briefly of casing damage[J].China Petroleum Machinery,2008,36(4):76-80.
[206]房军,赵怀文,岳伯谦,等.非均匀地应力作用下套管与水泥环的受力分析[J].石油大学学报:自然科学版,1995,19(6):52-57.Fang Jun,Zhao Huaiwen,Yue Boqian,et al.Analysis of loading propekty of casing and cement sheath under nonuniform geologic stress[J].Journal of the University of Petroleum,China:Edition of Natural Science,1995,19(6):52-57.
[207]房军,岳伯谦,赵怀文,等.非均匀地应力作用下套管和水泥环表面受力特性分析[J].石油大学学报:自然科学版,1997,21(1):46-48.Fang Jun,Yue Boqian,Zhao Huaiwen,et al.Buckling critical load of drill string for vertical plane in inclined hole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1997,21(1):46-48.
[208]房军,谷玉洪,米丰珍.非均匀载荷作用下套管挤压失效数值分析[J].石油机械,1999,27(7):34-37.Fang Jun,Gu Yuhong,Mi Fengzhen.A numerical analysis of casing collapse under nonuniform load[J].China Petroleum Machinery,1999,27(7):34-37.
[209]李志明,张颜福,王计平,等.蠕变地层中套管的附加载荷[J].石油钻采工艺,1999,21(5):10-13.Li Zhiming,Zhang Yanfu,Wang Jiping,et al.Addtional load of casing used in creep formation[J].Oil Drilling&Production Technology,1999,21(5):10-13.
[210]殷有泉,李志明,张广清,等.蠕变地层套管载荷分析研究[J].岩石力学与工程学报,2004,23(14):2381-2384.Yin Youquan,Li Zhiming,Zhang Guangqing,et al.Study on casing loads in creep formations[J].Chinese Journal of Rock Mechanics and Engineering,2004,23(14):2381-2384.
[211]殷有泉,蔡永恩,陈朝伟,等.非均匀地应力场中套管载荷的理论解[J].石油学报,2006,27(4):133-138.Yin Youquan,Cai Yong’en,Chen Zhaowei,et al.Theoretical solution of casing loading in non-uniform ground stress field[J].Acta Petrolei Sinica,2006,27(4):133-138.
[212]殷有泉,陈朝伟,李平恩.套管-水泥环-地层应力分布的理论解[J].力学学报,2006,38(6):835-842.Yin Youquan,Chen Zhaowei,Li Ping’en.Theoretical solutions of stress distribution in casing-cement and stratum system[J].Chinese Journal of Theoretical and Applied Mechanics,2006,38(6):835-842.
[213]李平恩,殷有泉,苏先樾.流变地层地应力场中套管载荷的理论解[J].北京大学学报:自然科学版,2007,43(1):11-16.Li Ping’en,Yin Youquan,Su Xianyue.Theoretical solution of casing loads in rheological formation in tectonic stress field[J].Acta Scientiarum Naturalium Universitatis Pekinensis,2007,43(1):11-16.
[214]陈朝伟,殷有泉,蔡永恩,等.利用套管变形测井资料反演储层应力场[J].岩石力学与工程学报,2007,26(4):734-739.Chen Zhaowei,Yin Youquan,Cai Yong'en,et al.Back analysis of reservoir stress field with logging data of casing deformation[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(4):734-739.
[215]李子丰,杨敏嘉,李邦达.油井套管损坏的机理分析[J].石油钻采工艺,1985,7(4):47-53.Li Zifeng,Yang Minjia,Li Bangda.Analysis of mechanism on production casing failure[J].Oil Drilling&Production Technology,1985,7(4):47-53.
[216]李子丰,张永贵,阳鑫军.蠕变地层与油井套管相互作用力学模型[J].石油学报,2009,30(1):129-131.Li Zifeng,Zhang Yonggui,Yang Xinjun.Mechanics model for interaction between creep formation and oil well casing[J].Acta Petrolei Sinica,2009,30(1):129-131.
[217]尹虎,李黔,李建涛,等.利用套管变形量进行地应力反演[J].石油钻探技术,2012,40(3):54-57.Yin Hu,Li Qian,Li Jiantao,et al.Inversion of in-situ stress with the amount of casing deformation[J].Petroleum Drilling Techniques,2012,40(3):54-57.
[218]王力军,于永南,侯兴华,等.非均匀地应力下蠕变地层套管的载荷与变形关系[J].科学技术与工程,2013,13(5):1229-1233.Wang Lijun,Yu Yongnan,Hou Xinghua,et al.Study on casing loads and deformation with non-uniform in-situ stresses in creep stratum[J].Science Technology and Engineering,2013,13(5):1229-1233.
[219]李增亮,蔡俐娜,王木乐,等.地应力方向对椭圆套管强度的影响规律分析[J].石油机械,2013,41(11):14-16.Li Zengliang,Cai Lina,Wang Mule,et al.Analysis of the influence law of ground stress direction on elliptic casing strength[J].China Petroleum Machinery,2013,41(11):14-16.
[220]王宴滨,高德利,房军.套管-水泥环-地层多层组合系统受力特性分析[J].应用力学学报,2014,31(3):387-392.Wang Yanbin,Gao Deli,Fang Jun.Mechanical characteristics analysis of casing-cement ring-formation multilayer composite system[J].Chinese Journal of Applied Mechanics,2014,31(3):387-392.
[221]刘海龙,邓金根,赵军,等.非均匀地应力下水泥环完整性规律研究[J].科学技术与工程,2014,14(23):37-41.Liu Hailong,Deng Jingen,Zhao Jun,et al.Study on cement sheath integrity under non-uniform situ-stress[J].Science Technology and Engineering,2014,14(23):37-41.
[222]屈展,王小增,窦益华,等.非均匀载荷作用下偏心磨损套管稳定性准则[J].工程力学,2015,32(7):249-256.Qu Zhan,Wang Xiaozeng,Dou Yihua,et al.Stability criterion of eccentric worn casing under the nonuniform external loadings[J].Engineering Mechanics,2015,32(7):249-256.
[223]Yin Fei,Gao Deli.Mechanical analysis and design of casing in directional well under in-situ stresses[J].Journal of Natural Gas Science and Engineering,2014,20:285-291.
[224]陈朝伟.流变性地层套管等效外挤力[J].石油学报,2012,33(4):702-705.Chen Zhaowei.Equivalent external casing pressure in rheological strata[J].Acta Petrolei Sinica,2012,33(4):702-705.
[225]翟晓鹏,楼一珊,曹砚峰,等.蠕变岩层地层刚度和松弛时间对套管外挤力的影响[J].石油学报,2015,36(10):1299-1304.Zhai Xiaopeng,Lou Yishan,Cao Yanfeng,et al.Influences of stratum stiffness and relaxation time of creep layers on external squeeze pressure of casing[J].Acta Petrolei Sinica,2015,36(10):1299-1304.
[226]李子丰,杨海军,陈飞.蠕变性地层中套管有效外挤压力的计算方法探讨[J].石油钻探技术,2014,42(3):13-15.Li Zifeng,Yang Haijun,Chen Fei.The calculation of the effective external pressure on casing in creep formation[J].Petroleum Drilling Techniques,2014,42(3):13-15.
[227]宋吉水,张国亮,刘绍轩,等.射孔对套管抗挤强度影响[J].辽宁工程技术大学学报:自然科学版,2008,27(4):523-525.Song Jishui,Zhang Guoliang,Liu Shaoxuan,et al.Effect produced by perforation on counter-extrusion intensity of casing[J].Journal of Liaoning Technical University:Natural Science,2008,27(4):523-525.
[228]廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27(2):250-256.Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultradeep wells[J].Engineering Mechanics,2010,27(2):250-256.
[229]许志倩,闫相祯,杨秀娟.CO2腐蚀对套管强度动态影响分析[J].机械工程学报,2014,50(1):169-177.Xu Zhiqian,Yan Xiangzhen,Yang Xiujuan.Strength time varying analysis of casing with CO2 corrosion defects[J].Journal of Mechanical Engineering,2014,50(1):169-177.
[230]赵均海,李艳,张常光,等.基于统一强度理论的石油套管柱抗挤强度[J].石油学报,2013,34(5):969-976.Zhao Junhai,Li Yan,Zhang Changguang,et al.Collapsing strength for petroleum casing string based on unified strength theory[J].Acta Petrolei Sinica,2013,34(5):969-976.
[231]李艳,赵均海,李楠,等.基于统一强度理论的厚壁套管柱三轴抗拉强度[J].工程力学,2015,32(1):234-240.Li Yan,Zhao Junhai,Li Nan,et al.Tri-axial tension strength of thick-walled casing strings based on unified strength theory[J].Engineering Mechanics,2015,32(1):234-240.
[232]陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:261-262.Chen Tinggen,Guan Zhichuan.Theory and technology of drilling engineering[M].Dongying:China University of Petroleum Press,2000:261-262.
[233]赵怀文.关于管的抗挤计算的若干问题——答“试论套管挤压理论中的几个问题”[J].石油矿场机械,1981(2):17-31.Zhao Huaiwen.Some problems about pipe collapsing calculation-answer to“try to discuss about several problems of the theory of casing extrusion”[J].Oil Field Equipment,1981(2):17-31.
[234]龚伟安.再论不均壁厚圆管的弹性失稳问题[J].石油钻采工艺,1997,19(4):21-28.Gong Wei’an.Study second time on loss of stability of thick circular pipe of non-uniform wall thickness[J].Oil Drilling&Production Technology,1997,19(4):21-28.
[235]韩志勇.对双向应力椭圆理论的质疑[J].石油大学学报:自然科学版,2000,24(2):21-24.Han Zhiyong.Questions to the ellipse of plasticity[J].Journal of the University of Petroleum,China:Edition of Natural Science,2000,24(2):21-24.
[236]韩志勇.对我国《套管柱强度设计方法》标准的疑问[J].石油钻探技术,2004,32(5):1-5.Han Zhiyong.Discussion on the revised standard-design method for casing string strength[J].Petroleum Drilling Techniques,2004,32(5):1-5.
[237]韩志勇.关于套管柱三轴抗挤强度设计问题的讨论[J].石油大学学报:自然科学版,2004,28(5):43-48.Han Zhiyong.Discussion on the new design standard for tri-axial stress anti-collapse strength of casing string[J].Journal of the University of Petroleum,China:Edition of Natural Science,2004,28(5):43-48.
[238]韩志勇.对《套管柱井口悬挂载荷计算方法》的几点意见[J].石油钻探技术,2011,39(1):1-5.Han Zhiyong.Comments on industry standard“wellhead casing suspended load calculation method”[J].Petroleum Drilling Techniques,2011,39(1):1-5.
[239]韩志勇.关于“套管柱三轴抗拉强度公式”的讨论[J].中国石油大学学报:自然科学版,2011,35(4):77-80.Han Zhiyong.Discussing on formula of tri-axial tension strength of casing string[J].Journal of China university of Petroleum:Edition of Natural Science,2011,35(4):77-80.
[240]韩来聚,贾江鸿,闫振来.基于应变的热采井套管设计方法[J].中国石油大学学报:自然科学版,2014,38(3):68-72.Han Laiju,Jia Jianghong,Yan Zhenlai.A casing design method based on strain variations for wells in thermal recovery processes[J].Journal of China University of Petroleum:Edition of Natural Science,2014,38(3):68-72.
[241]李子丰,吴德华,黄跃芳,等.井筒—地层动态温度场数学模型[J].石油钻采工艺,1996,18(1):54-58.Li Zifeng,Wu Dehua,Huang Yuefang,et al.Mathematical model for temperature field of wellbore and formation[J].Oil Drilling&Production Technology,1996,18(1):54-58.
[242]李子丰,吴德华,黄跃芳,等.套管柱和注汽管柱热弹性力学分析[J].石油钻采工艺,1995,17(6):62-68.Li Zifeng,Wu Dehua,Huang Yuefang,et al.Thermoplastic mechanics analysis of casing string and tubing string during injecting steam[J].Oil Drilling&Production Technology,1995,17(6):62-68.
[243]李子丰,马兴瑞,黄文虎,等.热采井套管柱力学分析[J].工程力学,1998,15(2):19-26.Li Zifeng,Ma Xingrui,Huang Wenhu,et al.Mechanical analysis of casing in thermal recovery wells[J].Engineering Mechanics,1998,15(2):19-26.
[244]李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预压固井技术[J].工程力学,2008,25(6):219-224.Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.Casing cementing with internal prepressurization for thermal recovery wells[J].Engineering Mechanics,2008,25(6):219-224.
[245]Li Zifeng.Casing cementing with half warm-up for thermal recovery wells[J].Journal of Petroleum Science and Engineering,2008,61(2/4):94-98.
[246]Li Zifeng.Casing cementing with internal pre-pressurization for thermal recovery wells[J].Journal of Canadian Petroleum Technology,2008,47(12):44-49.
[247]李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预膨胀固井技术[J].固体力学学报,2009,30(2):162-169.Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.The pre-expansion technique to protect casing from thermal failure in thermal recovery wells[J].Chinese Journal of Solid Mechanics,2009,30(2):162-169.
[248]梁政,邓雄.高温高压深井测试管柱力学研究初探[J].天然气工业,1998,18(4):62-65.Liang Zheng,Deng Xiong.Primary discussion on the mechanical analysis of high temperature high pressure deep well testing pipe string[J].Natural Gas Industry,1998,18(4):62-65.
[249]邓雄,梁政,余孝林.高温高压深井测试管柱三维力学分析[J].天然气工业,2000,20(4):54-57.Deng Xiong,Liang Zheng,Yu Xiaolin.Three dimensional mechanic analysis of the testing string in deep well with high temperature and high pressure[J].Natural Gas Industry,2000,20(4):54-57.
[250]高宝奎,高德利.高温高压井测试管柱变形增量计算模型[J].天然气工业,2002,22(6):52-54.Gao Baokui,Gao Deli.Incremental calculation model of testing string deformation in a high-temperature and high-pressure well[J].Natural Gas Industry,2002,22(6):52-54.
[251]于振东,李艳.试油测试射孔管柱的间隙元分析[J].应用力学学报,2003,20(1):73-77.Yu Zhendong,Li Yan.Finite clearance element analysis of perforation tube string for testing for oil[J].Chinese Journal of Applied Mechanics,2003,20(1):73-77.
[252]Li Zifeng.Mechanical analysis of tubing string in well testing operation[J].Journal of Petroleum Science and Engineering,2012,90-91:61-69.
[253]李敬元,李子丰,马兴瑞,等.热采井注汽管柱力学分析[J].工程力学,1998,15(3):51-60.Li Jingyuan,Li Zifeng,Ma Xingrui,et al.Mechanics analysis of tubing in thermal recovery wells[J].Engineering Mechanics,1998,15(3):51-60.
[254]李子丰,孙虎,苏金柱,等.压裂管柱力学分析理论与应用[J].应用基础与工程科学学报,2012,20(5):846-862.Li Zifeng,Sun Hu,Su Jinzhu,et al.Theory and applications of mechanical analysis of tubing string in fracturing operation[J].Journal of Basic Science and Engineering,2012,20(5):846-862.
[255]Li Jingyuan,Li Zifeng.Mechanical analysis of tubing string in fracturing operation[J].The Open Petroleum Engineering Journal,2013,6(1):12-24.
[256]刘巨保,张学鸿,朱振锐,等.水平井分流压裂管柱设计与力学分析[J].天然气工业,1998,18(2):46-48.Liu Jiubao,Zhang Xuehong,Zhu Zhenrui,et al.Design and mechanical analysis of the fractional flow fracturing string in a horizontal well[J].Natural Gas Industry,1998,18(2):46-48.
[257]练章华,张颖,赵旭,等.水平井多级压裂管柱力学、数学模型的建立与应用[J].天然气工业,2015,35(1):85-91.Lian Zhanghua,Zhang Ying,Zhao Xu,et al.Establishment and application of mechanical and mathematical models for multistage fracturing strings in a horizontal well[J].Natural Gas Industry,2015,35(1):85-91.
[258]Gibbs S G.Predicting the behavior of sucker-rod pumping systems[J].Journal of Petroleum Technology,1963,15(7):769-778.
[259]Gibbs S G,Neely A B.Computer diagnosis of down-hole conditions in sucker rod pumping wells[J].Journal of Petroleum Technology,1966,18(1):91-98.
[260]Gibbs S G.Design and diagnosis of deviated rod-pumped wells[R].SPE22787,1992.
[261]张少南,张玉斌,张跃武.有杆泵抽油装置的计算机诊断技术[J].大庆石油学院学报,1985,9(1):19-32.Zhang Shaonan,Zhang Yubin,Zhang Yuewu.Computer diagnosis technology of sucker rod pumping unit[J].Journal of Daqing Petroleum Institute,1985,9(1):19-32.
[262]陶景明,张少南,李子丰.有杆泵抽油井示功图的预測[J].大庆石油学院学报,1986,10(2):18-31.Tao Jingming,Zhang Shaonan,Li Zifeng.Predicting the dynamometer cards of sucker-rod pump[J].Journal of Daqing Petroleum Institute,1986,10(2):18-31.
[263]张少南,陶景明,李子丰.有杆泵抽油井计算机预测技术[J].石油钻采工艺,1986,6(4):45-50.Zhang Shaonan,Tao Jingming,Li Zifeng.Computerized prediction technique for rod pumping wells[J].Oil Drilling&Production Technology,1986,6(4):45-50.
[264]李子丰,陶景明,张少南.有杆泵抽油系统动态参数预测技术[J].大庆石油学院学报,1987,11(4):32-39.Li Zifeng,Tao Jingming,Zhang Shaonan.A prediction technique for the behavior of sucker-rod pumping systems[J].Journal of Daqing Petroleum Institute,1987,11(4):32-39.
[265]李敬媛,李子丰.抽油机旋转平衡新设想[J].大庆石油学院学报,1988,12(2):21-26.Li Jingyuan,Li Zifeng.A new idea of pumping unit rotational balance[J].Journal of Daqing Petroleum Institute,1988,12(2):21-26.
[266]Feng Ziming,Ding Huanhuan,Jiang Minzheng.New secondary balancing method saves energy for crank-balanced rod-pumping application[J].SPE Production&Operations,2015,30(2):141-145.
[267]Xing Mingming,Dong Shimin.A new simulation model for a beam-pumping system applied in energy saving and resourceconsumption reduction[J].SPE Production&Operations,2015,30(2):130-140.
[268]隋少波.螺杆泵抽油杆柱的摩擦力矩计算[J].石油机械,1988,16(11):37-43.Sui Shaobo.Frictional moment calculation of Screw-pump sucker rods[J].China Petroleum Machinery,1988,16(11):37-43.
[269]高圣平.井下单螺杆抽油泵杆柱受力分析与设计[J].石油机械,1997,25(1):8-10.Gao Shengping.Force analysis and design of rod string on single screw pump system[J].China Petroleum Machinery,1997,25(1):8-10.
[270]李敬元,李子丰,魏继德,等.螺杆泵驱动杆柱力学分析及稳定器布置[J].石油机械,1998,26(1):13-17.Li Jingyuan,Li Zifeng,Wei Jide,et al.Force analysis of rod string on screw pump system and allocation of stabilizers[J].China Petroleum Machinery,1998,26(1):13-17.
[271]吴晓东,陈德春,薛建泉,等.地面驱动螺杆泵井节点系统优化设计技术[J].石油大学学报:自然科学版,1999,23(5):49-52.Wu Xiaodong,Chen Dechun,Xue Jianquan,et al.Optimizing design for surface drived progressing cavity pumping wells by using nodal system analysis[J].Journal of the University of Petroleum,China:Edition of Natural Science,1999,23(5):49-52.
[272]董世民,李志刚.螺杆泵采油杆柱扭转振动固有频率的计算方法[J].石油矿场机械,2006,35(3):34-37.Dong Shimin,Li Zhigang.Research on the mechanical model and natural frequencies of torsion vibration of the rod string of screw production systems[J].Oil Field Equipment,2006,35(3):34-37.
[273]范青,练章华,邓玮,等.三高气井管柱损伤研究现状[J].重庆科技学院学报:自然科学版,2010,12(2):63-67.Fan Qing,Lian Zhanghua,Deng Wei,et al.Three high gas wells column injury status research and development[J].Journal of Chongqing University of Science and Technology:Natural Sciences Edition,2010,12(2):63-67.
[274]樊洪海,王宇,张丽萍,等.高压气井完井管柱的流固耦合振动模型及其应用[J].石油学报,2011,32(3):547-550.Fan Honghai,Wang Yu,Zhang Liping,et al.A fluid-solid coupled oscillation model for completion string and its application in high pressure gas well[J].Acta Petrolei Sinica,2011,32(3):547-550.
[275]练章华,林铁军,刘健,等.水平井油管柱射孔振动的有限元分析[J].石油钻采工艺,2006,28(1):56-59.Lian Zhanghua,Lin Tiejun,Liu Jian,et al.Finite-element analysis of tube string vibration on horizontal well[J].Oil Drilling&Production Technology,2006,28(1):56-59.
[276]陈华彬,唐凯,任国辉,等.超深井射孔管柱动态力学分析[J].测井技术,2010,34(5):487-491.Chen Huabin,Tang Kai,Ren Guohui,et al.String dynamic mechanics analysis on ultra-deep perforation[J].Well Logging Technology,2010,34(5):487-491.
[277]伍开松,赵云,柳庆仁,等.高压射孔测试管柱力学行为仿真[J].石油矿场机械,2011,40(5):74-77.Wu Kaisong,Zhao Yun,Liu Qingren,et al.Mechanical behavior simulation of high-pressure perforating testing string[J].Oil Field Equipment,2011,40(5):74-77.
[278]蔡履忠,赵烜,薛世峰,等.射孔作业过程管柱结构动态响应分析[J].石油矿场机械,2015,44(5):26-30.Cai Lüzhong,Zhao Xuan,Xue Shifeng,et al.Dynamic response analysis of string structure during perforating process[J].Oil Field Equipment,2015,44(5):26-30.
[279]练章华,施太和,韩建增.膨胀套管摩擦系数与轴向位移的模拟研究[J].石油机械,2002,30(1):1-3.Lian Zhanghua,Shi Taihe,Han Jianzeng.Computer simulatdion study of friction factor of expandable casing and is axial displacement[J].China Petroleum Machinery,2002,30(1):1-3.
[280]练章华,施太和,杨龙,等.膨胀套管计算机仿真分析[J].天然气工业,2003,23(4):41-43.Lian Zhanghua,Shi Taihe,Yang Long,et al.Computer simulating analysis of expandable casing[J].Natural Gas Industry,2003,23(4):41-43.
[281]李子丰,李敬元,赵平,等.膨胀筛管力学分析[J].石油机械,2003,31(12):6-8.Li Zifeng,Li Jingyuan,Zhao Ping,et al.Mechanical analysis of expandable screen pipe[J].China Petroleum Machinery,2003,31(12):6-8.
[282]Li Zifeng,Yao Dongping,Samuel R.Simplified model for expansion and contraction of slotted tubulars[J].Journal of Petroleum Science and Engineering,2010,72(3/4):244-250.
[283]李华桂,吴竞择.海洋钻井隔水管顶张力分析[J].西南石油学院学报,1994,16(4):84-90.Li Huagui,Wu Jingze.Top tension analysis of offshore drilling riser[J].Journal of Southwest--China Petroleum Institute,1994,16(4):84-90.
[284]贾星兰,方华灿.海洋钻井隔水管的动力响应[J].石油机械,1995,23(8):18-22.Jia Xinglan,Fang Huacan.Dynamic response of riser system in marine drilling[J].China Petroleum Machinery,1995,23(8):18-22.
[285]李华桂.海洋钻井隔水管的动力分析[J].石油学报,1996,17(1):122-127.Li Huagui.Dynamic analysis of offshore drilling riser[J].Acta Petrolei Sinica,1996,17(1):122-127.
[286]陈国明,刘秀全,畅元江,等.深水钻井隔水管与井口技术研究进展[J].中国石油大学学报:自然科学版,2013,37(5):129-139.Chen Guoming,Liu Xiuquan,Chang Yuanjiang,et al.Advances in technology of deepwater drilling riser and wellhead[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(5):129-139.
[287]李子丰,王鹏,赵民,等.深水隔水管横向振动力学分析[J].振动、测试与诊断,2013,33(6):1003-1007.Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deepwater[J].Journal of Vibration,Measurement&Diagnosis,2013,33(6):1003-1007.
[288]Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deep water[J].The Open Petroleum Engineering Journal,2015,8(1):38-44.
[289]李成,丁天怀,陈恳.周期性管结构信道的声传输方法分析[J].振动与冲击,2009,28(2):12-15.Li Cheng,Ding Tianhuai,Chen Ken.Analysis of acoustic transmission method in the periodic cascade Channel with its application to drill pipes[J].Journal of Vibration and Shock,2009,28(2):12-15.
[290]李成,丁天怀,陈恳.底部钻柱近钻头动态力测量及声传输方法[J].机械工程学报,2009,45(12):257-262.Li Cheng,Ding Tianhuai,Chen Ken.Acoustic transmission and measurement method for near-bit dynamic force signal of bottom drill string[J].Journal of Mechanical Engineering,2009,45(12):257-262.
[291]李成,井中武,樊尚春,等.钻柱内声传输特性的信道建模与分析[J].振动、测试与诊断,2013,33(3):405-409.Li Cheng,Jing Zhongwu,Fan Shangchun,et al.Modeling and analysis of acoustic transmission characteristics in drillstring[J].Journal of Vibration,Measurement&Diagnosis,2013,33(3):405-409.
[292]李成,井中武,刘钊,等.钻柱信道内隔声体结构建模与仿真分析[J].振动与冲击,2013,32(22):53-56.Li Cheng,Jing Zhongwu,Liu Zhao,et al.Modeling and simulation analysis for an acoustic isolation structure in a drillstring channel[J].Journal of Vibration and Shock,2013,32(22):53-56.
[293]李成,刘钊,丁天怀,等.钻柱声传输信号多载波调制激励分析[J].振动与冲击,2014,33(3):1-4.Li Cheng,Liu Zhao,Ding Tianhuai,et al.Multi-carrier modulation excitation analysis for acoustic transmission signal in a drillstring[J].Journal of Vibration and Shock,2014,33(3):1-4.
[294]李成,刘钊,樊尚春,等.钻柱信道中声信号传输的接收特性分析[J].振动、测试与诊断,2014,34(4):744-748.Li Cheng,Liu Zhao,Fan Shangchun,et al.Channel receiving characteristics for transmitted acoustic signal in a drill string[J].Journal of Vibration,Measurement&Diagnosis,2014,34(4):744-748.
[295]赵国山,管志川,王以法,等.钻柱结构声传输特性试验研究[J].石油矿场机械,2009,38(11):45-49.Zhao Guoshan,Guan Zhichuan,Wang Yifa,et al.Acoustical properties experimental study within drill strings[J].Oil Field Equipment,2009,38(11):45-49.
[296]赵国山,管志川,刘永旺.声波在钻柱中的传播特性[J].中国石油大学学报:自然科学版,2010,34(1):55-59.Zhao Guoshan,Guan Zhichuan,Liu Yongwang.Acoustic transmission properties in drill string[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(1):55-59.
[297]管志川,刘永旺,赵国山,等.钻柱结构对声传输特性的影响[J].石油学报,2012,33(4):687-691.Guan Zhichuan,Liu Yongwang,Zhao Guoshan,et al.Influence of the drill-string structure diversity on acoustic transmission characteristics[J].Acta Petrolei Sinica,2012,33(4):687-691.
[298]刘永旺,管志川,隆志强,等.钻柱中声传播的影响因素[J].中国石油大学学报:自然科学版,2012,36(5):89-95.Liu Yongwang,Guan Zhichuan,Long Zhiqiang,et al.Influence factors of acoustic transmission in drill strings[J].Journal of China University of Petroleum:Edition of Natural Science,2012,36(5):89-95.
[299]刘瑞文,管志川,李春山.钻柱振动信号在线监测及应用[J].振动与冲击,2013,32(1):60-64.Liu Ruiwen,Guan Zhichuan,Li Chunshan.Drilling string vibration online monitoring and its application[J].Journal of Vibration and Shock,2013,32(1):60-64.
[300]刘永旺,管志川,都振川,等.周期性螺纹连接管结构中声波的频谱特性测试[J].中国石油大学学报:自然科学版,2015,39(2):58-62.Liu Yongwang,Guan Zhichuan,Du Zhenchuan,et al.Spectrum characteristics testing of acoustic propagation in drill-string with periodic thread connections[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(2):58-62.
[301]赵国山,管志川,都振川,等.井下钻柱信道的声传播特性[J].石油学报,2013,34(1):151-156.Zhao Guoshan,Guan Zhichuan,Du Zhenchuan,et al.Acoustical propagation characteristics of the communication channel of downhole drill string[J].Acta Petrolei Sinica,2013,34(1):151-156.
[302]刘永旺,管志川,赵国山,等.尺寸差异钻杆组成的钻柱中声传播特性测试[J].振动与冲击,2015,34(7):93-97.Liu Yongwang,Guan Zhichuan,Zhao Guoshan,et al.Tests for acoustic propagation characteristics in drill string composed of size-difference drill pipes[J].Journal of Vibration and Shock,2015,34(7):93-97.
[303]高智海,杨勇,赵克枫.套管磨损的研究进展[J].西安石油学院学报:自然科学版,1999,14(2):41-45.Gao Zhihai,Yang Yong,Zhao Kefeng.Development in the research of casing wear[J].Journal of Xi'an Petroleum Institute:Edition of Natural Science,1999,14(2):41-45.
[304]陈浩,刘承杰.大位移井套管柱磨损的探讨[J].石油矿场机械,2002,31(1):7-9.Chen Hao,Liu Chengjie.A discussion on the casing wear in extended reach well[J].Oil Field Equipment,2002,31(1):7-9.
[305]余磊,樊建春,张来斌,等.深井、超深井套管磨损机理及预测技术研究[J].润滑与密封,2004(5):87-90.Yu Lei,Fan Jianchun,Zhang Laibin,et al.Recent advances in the research of casing wear mechanism and predicting methods in deep&ultra-deep well drilling engineering[J].Lubrication Engineering,2004(5):87-90.
[306]林元华,付建红,施太和,等.套管磨损机理及其防磨措施研究[J].天然气工业,2004,24(7):58-61.Lin Yuanhua,Fu Jianhong,Shi Taihe,et al.Research on casing wear mechanism and antiwear measures[J].Natural Gas Industry,2004,24(7):58-61.
[307]王卫华,储胜利,樊建春.深井和超深井套管磨损研究现状及发展趋势[J].石油机械,2005,33(12):58-61.Wang Weihua,Chu Shengli,Fan Jianchun.The research status and development trend of casing wear in deep and ultra-deep wells[J].China Petroleum Machinery,2005,33(12):58-61.
[308]于会媛,张来斌,樊建春,等.深井、超深井套管磨损监测方法研究及应用[J].润滑与密封,2006(11):12-16.Yu Huiyuan,Zhang Laibin,Fan Jianchun,et al.The research and application of monitor method of casing wear in deep&ultral deep well[J].Lubrication Engineering,2006(11):12-16.
[309]梁尔国,李子丰,王长进,等.深井和大位移井套管磨损程度预测[J].石油钻探技术,2013,41(2):65-69.Liang Erguo,Li Zifeng,Wang Changjin,et al.Casing abrasion prediction for deep and extended reach wells[J].Petroleum Drilling Techniques,2013,41(2):65-69.
[310]梁尔国,李子丰,王金敏,等.油气井套管磨损规律试验研究[J].石油钻探技术,2015,43(1):69-74.Liang Erguo,Li Zifeng,Wang Jinmin,et al.Experimental study on casing wear mechanism in oil and gas wells[J].Petroleum Drilling Techniques,2015,43(1):69-74.
[311]黄毓林,戴祖福.套管腐蚀的预防及治理工艺技术[J].石油钻采工艺,1995,17(2):76-80.Huang Yulin,Dai Zufu.Prevention and control technology of casing corrosion[J].Oil Drilling&Production Technology,1995,17(2):76-80.
[312]毛克伟,史茂成.油气井套管腐蚀原因与防腐措施[J].石油钻探技术,1996,24(1):31-36.Mao Kewei,Shi Maocheng.Cause and prevention of casing corrosion in oilwells[J].Petroleum Drilling Techniques,1996,24(1):31-36.
[313]祝效华,刘少胡,童华.气体钻井钻杆冲蚀规律研究[J].石油学报,2010,31(6):1013-1017.Zhu Xiaohua,Liu Shaohu,Tong Hua.A study on the drill pipe erosion law in gas drilling[J].Acta Petrolei Sinica,2010,31(6):1013-1017.
[314]林铁军,练章华,陈世春,等.气体钻井中气体携岩对钻杆的冲蚀机理研究[J].石油钻采工艺,2010,32(4):1-4.Lin Tiejun,Lian Zhanghua,Chen Shichun,et al.Study on drill pipe erosion of gas carrying cuttings in gas drilling[J].Oil Drilling&Production Technology,2010,32(4):1-4.
[315]姚建林,狄勤丰,王文昌,等.空气水平井中钻柱冲蚀模型与分析[J].钻采工艺,2010,33(5):15-17.Yao Jianlin,Di Qinfeng,Wang Wenchang,et al.Erosion analysis of cuttings in air drilling for horizontal well[J].Drilling&Production Technology,2010,33(5):15-17.
[316]李东洋,王垒超,张涛,等.气体钻井中钻柱力学性能及冲蚀实验研究[J].西南石油大学学报:自然科学版,2012,34(4):158-164.Li Dongyang,Wang Leichao,Zhang Tao,et al.Experimental research on mechanical properties and erosion of the drill string in gas drilling[J].Journal of Southwest Petroleum University:Science&Technology Edition,2012,34(4):158-164.
[317]祝效华,刘少胡,陈绍安,等.气体钻井用钻杆磨损后剩余强度分析[J].石油机械,2011,39(3):25-27.Zhu Xiaohua,Liu Shaohu,Chen Shao’an,et al.An analysis of the residual strength of the drill pipe for gas drilling after abrasion[J].China Petroleum Machinery,2011,39(3):25-27.
[318]袁光杰,姚振强,林元华,等.套管钻井中套管疲劳失效问题的研究[J].天然气工业,2003,23(5):56-58.Yuan Guangjie,Yao Zhenqiang,Lin Yuanhua,et al.Research on fatigue failures of casing in casing drilling[J].Natural Gas Industry,2003,23(5):56-58.
[319]闫相祯,邓卫东,高进伟,等.套管钻井中套管柱疲劳可靠性及相关力学特性研究[J].石油学报,2009,30(5):769-773.Yan Xiangzhen,Deng Weidong,Gao Jinwei,et al.Analysis on mechanics and fatigue reliability of casing string during casing drilling[J].Acta Petrolei Sinica,2009,30(5):769-773.
[320]崔旭明,何富君,谭云,等.油管的疲劳强度分析[J].应用力学学报,2003,20(1):128-132.Cui Xuming,He Fujun,Tan Yun,et al.Analysis of oil tube fatigue fracture[J].Chinese Journal of Applied Mechanics,2003,20(1):128-132.
[321]李子丰,李雪娇,王鹏.预弯曲连续油管及其疲劳寿命预测[J].石油学报,2012,33(4):706-710.Li Zifeng,Li Xuejiao,Wang Peng.Pre-bending coiled tubing and its fatigue life prediction[J].Acta Petrolei Sinica,2012,33(4):706-710.
[322]Li Zifeng,Li Xuejiao,Wang Peng.Prebending coiled tubing and its fatigue life prediction[J].Journal of Energy Resources Technology,2012,134(3):034502.
[323]李子丰,赵文彬,陈礼强.杆管柱力学在医学中的应用前景[J].生物医学工程学杂志,2011,28(4):851-854.Li Zifeng,Zhao Wenbin,Cheng Liqiang.A review on applications of tubular mechanics in medicine[J].Journal of Biomedical Engineering,2011,28(4):851-854.
[324]李子丰,胡志兴,周兴美.油气井杆管柱力学在微米/纳米系统中的应用前景[J].中国西部科技,2010,9(9):16-19.Li Zifeng,Hu Zhixing,Zhou Xingmei.Application possibilities of tubular mechanics in oil-gas wells in micro/nano systems[J].Science and Technology of West China,2010,9(9):16-19.
[2]Lubinski A.Developments in petroleum engineering(Volume I)[M].Houston,Texas:Gulf Publishing Co.,1987.
[3]Lubinski A.Developments in petroleum engineering(Volume II)[M].Houston,Texas:Gulf Publishing Co.,1988.
[4]鲁宾斯基A.钻井工程进展(第一册)[M].黎孔昭,严世才,朱千里,等译.北京:石油工业出版社,1994:1-297.Lubinski A.Developments in petroleum engineering(Volume I)[M].Li Kongzhao,Yan Shicai,Zhu Qianli,et al,trans.Beijing:Petroleum Industry Press,1994:1-297.
[5]鲁宾斯基A.钻井工程进展(第二册)[M].鲍有光,梅江,译.北京:石油工业出版社,1993:1-238.Lubinski A.Developments in petroleum engineering(Volume II)[M].Bao Youguang,Mei Jiang,trans.Beijing:Petroleum Industry Press,1993:1-238.
[6]赵国珍,龚伟安.钻井力学基础[M].北京:石油工业出版社,1988:1-372.Zhao Guozhen,Gong Wei'an.Foundation of drilling mechanics[M].Beijing:Petroleum Industry Press,1988:1-372.
[7]白家祉,苏义脑.井斜控制理论与实践[M].北京:石油工业出版社,1990:1-401.Bai Jiazhi,Su Yinao.Deviation control theory and practice[M].Beijing:Petroleum Industry Press,1990:1-401.
[8]苏义脑.水平井井眼轨道控制[M].北京:石油工业出版社,2000:1-250.Su Yinao.Horizontal well trajectory control[M].Beijing:Petroleum Industry Press,2000:1-250.
[9]苏义脑.油气直井防斜打快技术——理论与实践[M].北京:石油工业出版社,2003:1-87.Su Yinao.Deviation control and fast drilling technology of oilgas vertical wells:theory and practice[M].Beijing:Petroleum Industry Press,2003:1-87.
[10]高德利,刘希圣,徐秉业.井眼轨迹控制[M].东营:石油大学出版社,1994:1-259.Gao Deli,Liu Xisheng,Xu Bingye.Prediction and control of wellbore trajectory[M].Dongying:China University of Petroleum Press,1994:1-259.
[11]高德利.油气钻井工程力学进展-刘希圣教授70寿辰暨执教45周年纪念文集[M].东营:石油大学出版社,1996:1-226.Gao Deli.Advances in oil-gas wells drilling engineering mechanics-Professor Liu Xisheng 70 birthday cum coached 45 anniver-sary anthology[M].Dongying:China University of Petroleum Press,1996:1-226.
[12]高德利.油气井管柱力学与工程[M].东营:中国石油大学出版社,2006:1-316.Gao Deli.Down-hole tubular mechanics and its applications[M].Dongying:China University of Petroleum Press,2006:1-316.
[13]李子丰.油气井杆管柱力学[M].北京:石油工业出版社,1996:1-145.Li Zifeng.Tubular mechanics in oil-gas wells[M].Beijing:Petroleum Industry Press,1996:1-145.
[14]李子丰.油气井杆管柱力学及应用[M].北京:石油工业出版社,2008:1-224.Li Zifeng.Tubular mechanics in oil-gas wells and its applications[M].Beijing:Petroleum Industry Press,2008:1-224.
[15]李鹤林.石油管工程[M].北京:石油工业出版社,1999:1-125.Li Helin.Oil pipe engineering[M].Beijing:Petroleum Industry Press,1999:1-125.
[16]李鹤林,李平全,冯耀荣.石油钻柱失效分析及预防[M].北京:石油工业出版社,1999:1-297.Li Helin,Li Pingquan,Feng Yaorong.Failure analysis and precaution of petroluem drill string[M].Beijing:Petroluem Industry Press,1999:1-297.
[17]董世民.抽油机井动态参数计算机仿真与系统优化[M].北京:石油工业出版社,2003:1-156.Dong Shimin.Computer simulation of dyanmic parameters of rodpumping system and system optimization[M].Beijing:Petroleum Industry Press,2003:1-156.
[18]姜伟.海洋石油钻井工程力学研究与实践[M].北京:石油工业出版社,2008:1-214.Jiang Wei.Study and practice in engineering mechanics of offshore petroleum drillilng[M].Beijing:Petroleum Industry Press,2008:1-214.
[19]刘清友,孟庆华,庞东晓.钻井系统动力学仿真研究及应用[M].北京:科学出版社,2009:1-202.Liu Qingyou,Meng Qinghua,Pang Dongxiao.Drilling system dynamics simulation and application[M].Beijing:Science Press,2009:1-202.
[20]刘清友,何玉发.深井注入管柱力学行为及应用[M].北京:科学出版社,2013:1-179.Liu Qingyou,He Yufa.Deep well injection tubular mechanical behavior and application[M].Beijing:Science Press,2013:1-179.
[21]韩志勇.液压环境下的油井管柱力学[M].北京:石油工业出版社,2011:1-308.Han Zhiyong.Tubular mechanics in oil wells under hydraulic environment[M].Beijing:Petroleum Industry Press,2011:1-308.
[22]刘巨保,岳欠杯.石油钻采管柱力学[M].北京:石油工业出版社,2011:1-279.Liu Jubao,Yue Qianbei.Oil drilling&production pipe string mechanics[M].Beijing:Petroleum Industry Press,2011:1-279.
[23]刘巨保.石油钻采管柱力学[M].哈尔滨:黑龙江大学出版社,2012:1-433.Liu Jubao.Oil drilling&production pipe string mechanics[M].Harbin:Heilongjiang University Press,2012:1-433.
[24]Gibbs S G.Rod pumping:modern methods of design,diagnosis and surveillance[M].La Habra,Califoria:Theta Oilfield Services,Inc.,2012:1-660.
[25]郝俊芳,龚伟安.套管强度计算与设计[M].北京:石油工业出版社,1987:1-264.Hao Junfang,Gong Wei'an.Casing strength compuation and design[M].Beijing:Petroleum Industry Press,1987:1-264.
[26]于永南.钻柱力学分析的有限单元法[M].北京:石油大学出版社,1998:1-132.Yu Yongnan.Finite element method for drill string mechanical analysis[M].Beijing:China University of Petroleum Press,1998:1-132.
[27]章扬烈.钻柱运动学与动力学[M].北京:石油工业出版社,2001:1-121.Zhang Yanglie.Drillstring kinematics and dynamics[M].Beijing:Petroleum Industry Press,2001:1-121.
[28]李志明,殷有泉.油水井套管外挤力计算及其力学基础[M].北京:石油工业出版社,2006:1-153.Li Zhiming,Yin Youquan.Oil and water well casing external pressure computation and its mechanics foundation[M].Beijing:Petoleum Industry Press,2006:1-153.
[29]练章华.地应力与套管损害机理[M].北京:石油工业出版社,2009:1-197.Lian Zhanghua.In-situ stress and casing damage mechanism[M].Beijing:Petroleum Industry Press,2009:1-197.
[30]Samuel G R.Formulas and calculations for drilling operations[M].Hoboken:Scrivener,2010:205-252.
[31]吕苗荣.石油工程管柱力学[M].北京:中国石化出版社,2012:1-181.LüMiaorong.Tubular mechanics in petroleum engineering[M].Beijing:China Petrochemical Press,2012:1-181.
[32]黄桢,李鹭光,胡桂川.天然气井油管柱疲劳寿命预测[M].重庆:重庆大学出版社,2012:1-246.Huang Zhen,Li Luguang,Hu Guichuan.Gas well tubing string fatigue life prediction[M].Chongqing:Chongqing University Press,2012:1-246.
[33]徐秉业.弹性与塑性力学-例题和习题[M].北京:机械工业出版社,1981:1-632.Xu Bingye.Elastic-plastic mechanics-examples and exercises[M].Beijing:China Machine Press,1981:1-632.
[34]狄勤丰.旋转导向井下闭环钻井技术[M].西安:陕西科学技术出版社,1999.Di Qinfeng.Rotary closed-loop drilling technology[M].Xi'an:Shannxi Science and Technology Press,1999.
[35]李子丰,梁尔国.钻柱力学研究现状及进展[J].石油钻采工艺,2008,30(2):1-9.Li Zifeng,Liang Erguo.Research and development of drill string mechanics[J].Oil Drilling&Production Technology,2008,30(2):1-9.
[36]李子丰,蔡雨田,李冬梅,等.地层测试管柱力学分析[J].石油学报,2011,32(4):709-716.Li Zifeng,Cai Yutian,Li Dongmei,et al.Mechanical analysis ofpipe string in formation testing[J].Acta Petrolei Sinica,2011,32(4):709-716.
[37]李子丰.油气井杆管柱的稳定性与纵横弯曲[J].西部探矿工程,1997,9(2):23-25.Li Zifeng.Stability and criss cross curving of pipe pile of oil gas well[J].West-China Exploration Engineering,1997,9(2):23-25.
[38]高德利,刘希圣,徐秉业.钻柱力学研究的若干基本问题[C]∥中国石油工程学会钻井基础理论研讨会.大庆:中国石油工程学会,1992.Gao Deli,Liu Xisheng,Xu Bingye.Some essential questions of drill string mechanics research[C]∥Chinese Society of Petroleum Engineering Drilling Theoretical Seminar.Daqing:Chinese Society of Petroleum Engineering,1992.
[39]李子丰,马兴瑞,黄文虎.油气井杆管柱动力学基本方程[J].力学与实践,1995,17(1):40-42.Li Zifeng,Ma Xingrui,Huang Wenhu.Fundamental equations for dynamical analysis to the pipe in an oil and gas well[J].Mechanics in Engineering,1995,17(1):40-42.
[40]李子丰,马兴瑞,黄文虎.钻柱力学基本方程及其应用[J].力学学报,1995,27(4):406-414.Li Zifeng,Ma Xingrui,Huang Wenhu.A general formulation of drill stem mechanics and its applications[J].Acta Mechanica Sinica,1995,27(4):406-414.
[41]李子丰,李敬元,马兴瑞,等.油气井杆管柱动力学基本方程及应用[J].石油学报,1999,20(3):87-90.Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells[J].Acta Petrolei Sinica,1999,20(3):87-90.
[42]Li Zifeng,Li Jingyuan.Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis[J].Journal of Canadian Petroleum Technology,2002,41(5):44-53.
[43]Lubinski A.A Study of the buckling of rotary drilling strings[R].New York:American Petroleum Institute,1950:178-214.
[44]Paslay P R,Bogy D B.The stability of a circular rod laterally constrained to be in contact with an inclined circular cylinder[J].Journal of Applied Mechanics,1964,31(4):605-610.
[45]Dawson R.Drill pipe buckling in inclined holes[J].Journal of Petroleum Technology,1984,36(10):1734-1738.
[46]Mitchell R F.Buckling behavior of well tubing:the packer effect[J].Society of Petroleum Engineers Journal,1982,22(5):616-624.
[47]Mitchell R F.New concepts for helical buckling[J].SPE Drilling Engineering,1988,3(3):303-310.
[48]Mitchell R F.Simple frictional analysis of helical buckling of tubing[J].SPE Drilling Engineering,1986,1(6):457-465.
[49]Chen Yuche,Lin Y H,Cheatham J B.Tubing and casing buckling in horizontal wells(includes associated papers 21257 and21308)[J].Journal of Petroleum Technology,1990,42(2):140-191.
[50]李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的线性弯曲[J].哈尔滨工业大学学报,1994,26(1):96-100.Li Zifeng,Ma Xingrui,Huang Wenhu.The buckling of a circular rod or pipe laterally constrained to be contact with a horizontal circular cylinder[J].Journal of Harbin Institute of Technology,1994,26(1):96-100.
[51]李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的几何非线性弯曲[J].力学与实践,1994,16(3):16-18.Li Zifeng,Ma Xingrui,Huang Wenhu.Geometrically nonlinear bending of slender bar(tube)under compression torsion loading in a horizontal pipe[J].Mechanics in Engineering,1994,16(3):16-18.
[52]李子丰,马兴瑞,黄文虎.油气井杆管柱的静力稳定性[J].工程力学,1997,14(1):17-25.Li Zifeng,Ma Xingrui,Huang Wenhu.Static stability of pipe string in oil and gas wells[J].Engineering Mechanics,1997,14(1):17-25.
[53]Li Zifeng.Static buckling of rod and pipe string in oil and gas wells[R].SPE57013,1999.
[54]Gao Deli,Liu Fengwu.The post-buckling behavior of a tubular string in an inclined wellbore[J].Computer Modeling in Engineering&Sciences,2013,90(1):17-36.
[55]Huang Wenjun,Gao Deli.Sinusoidal buckling of a thin rod with connectors constrained in a cylinder[J].Journal of Natural Gas Science and Engineering,2014,18:237-246.
[56]Huang Wenjun,Gao Deli,Wei Shaolei,et al.Boundary conditions:a key factor in tubular-string buckling[J].SPE Journal,2015,20(6):1409-1420.
[57]Huang Wenjun,Gao Deli,Liu,Fengwu.Buckling analysis of tubular strings in horizontal wells[J].SPE Journal,2015,20(2):405-416.
[58]Huang Wenjun,Gao Deli.Helical buckling of a thin rod with connectors constrained in a torus[J].International Journal of Mechanical Sciences,2015,98:14-28.
[59]刘峰,王鑫伟.等曲率井中有重钻柱屈曲的非线性有限元分析[J].力学学报,2005,37(5):593-599.Liu Feng,Wang Xinwei.Nonlinear finite element buckling analysis of tubing with weight in constant-curvature wells[J].Chinese Journal of Theoretical and Applied Mechanics,2005,37(5):593-599.
[60]刘峰,王鑫伟,甘立飞.基于有限元分析的直井中钻柱螺旋屈曲临界载荷定义[J].工程力学,2007,24(1):173-177.Liu Feng,Wang Xinwei,Gan Lifei.The definition of helical buckling critical load of tubing in straight wells based on the finite element analysis[J].Engineering Mechanics,2007,24(1):173-177.
[61]袁张贤,王鑫伟.斜直圆筒内基于Euler-Rodrigues参数的细长杆螺旋屈曲研究[J].计算物理,2012,29(4):549-556.Yuan Zhangxian,Wang Xinwei.Helix buckling of a slender rod in inclined cylinder:analysis with Euler-Rodrigues parameters[J].Chinese Journal of Computational Physics,2012,29(4):549-556.
[62]龚伟安.压不弯杆件的室内模拟试验及其应用前景[J].力学与实践,1996,18(2):43-46.Gong Wei’an.Indoor simulation experiment of unbending drillcollar and application prospect[J].Mechanics in Engineering,1996,18(2):43-46.
[63]龚伟安.压不弯钻铤装置的理论探索[J].石油学报,1997,18(3):115-118.Gong Wei’an.Theoretical analysis and simulating test of unben-ding drill-collar[J].Acta Petrolei Sinica,1997,18(3):115-118.
[64]龚伟安,拓佰民,沈亚鹏,等.不弯曲钻铤的室内试验及现场试验的效果分析[J].石油钻采工艺,1999,21(3):1-9.Gong Wei’an,Tuo Baimin,Shen Yapeng,et al.Analysis on lab and on-site testing results for unbending drill collar[J].Oil Drilling&Production Technology,1999,21(3):1-9.
[65]李子丰.“压不弯钻铤”缺乏理论基础[J].石油学报,1999,20(5):82-83.Li Zifeng.Unbending drill-collar lack of theoretical basis[J].Acta Petrolei Sinica,1999,20(5):82-83.
[66]焦永树,蔡宗熙,严宗达.铅垂井段钻柱的浑沌运动[J].振动工程学报,2000,13(2):314-318.Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of a drillstring in vertical section[J].Journal of Vibration Engineering,2000,13(2):314-318.
[67]焦永树,蔡宗熙,严宗达.铅垂井段钻柱的动力分岔研究[J].石油学报,2000,21(5):86-90.Jiao Yongshu,Cai Zongxi,Yan Zongda.Dynamic bifurcation of the drillstring in vertical section[J].Acta Petrolei Sinica,2000,21(5):86-90.
[68]王正湖,孟祥玉,曹锡玲,等.垂直井中旋转钻柱受拉段分岔研究[J].石油大学学报:自然科学版,2001,25(2):13-15.Wang Zhenghu,Meng Xiangyu,Cao Xiling,et al.Study on bifurcation for tensile-rotating drillstring in vertical section of well[J].Journal of the University of Petroleum,China:Edition of Natural Science,2001,25(2):13-15.
[69]焦永树,蔡宗熙,严宗达.井孔约束下水平井段钻柱的浑沌运动[J].固体力学学报,2001,22(1):64-68.Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of the drillstring constrained by borehole in horizontal section[J].Acta Mechanica Solida Sinica,2001,22(1):64-68.
[70]李子丰.近期国内钻柱静动力分岔研究及存在问题[J].石油机械,2004,32(6):68-70.Li Zifeng.Some problems in the recent research of drillstring bifurcation[J].China Petroleum Machinery,2004,32(6):68-70.
[71]宋执武,高德利.受拉钻铤结构及其防斜减振原理[J].西部探矿工程,2007,19(7):64-65.Song Zhiwu,Gao Deli.The configuration of tensioned collar and its function of deviation control and vibration diminish[J].West-China Exploration Engineering,2007,19(7):64-65.
[72]李子丰.内外压力对油井管柱等效轴向力及稳定性的影响[J].中国石油大学学报:自然科学版,2011,35(1):65-67.Li Zifeng.Influence of internal and external pressure on equivalent axis force and stability of pipe string in oil wells[J].Journal of China University of Petroleum:Edition of Natural Science,2011,35(1):65-67.
[73]Li Zifeng.Using the fictitious force to judge the stability of pipe string is wrong[J].The Open Petroleum Engineering Journal,2013,6(1):57-60.
[74]韩志勇.关于内外压力对油井管柱轴向力和稳定性影响问题的讨论[J].石油钻探技术,2013,41(6):12-18.Han Zhiyong.Discussion on effects of internal and external pressure on axial force and stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2013,41(6):12-18.
[75]韩志勇.关于内外压力对油井管柱稳定性影响问题的再讨论[J].石油钻探技术,2014,42(4):14-20.Han Zhiyong.Re-discussion on effects of internal and external pressures on stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2014,42(4):14-20.
[76]Sun Youhong,Yu Yongping,Liu Baochang.A simple and accurate numeric solution procedure for nonlinear buckling model of drill string with frictional effect[J].Journal of Petroleum Science and Engineering,2015,128:44-52.
[77]Sun Youhong,Yu Yongping,Liu Baochang.Closed form solutions for predicting static and dynamic buckling behaviors of a drillstring in a horizontal well[J].European Journal of Mechanics-A/Solids,2015,49:362-372.
[78]Katz S,Givli S.The post-buckling behavior of a beam constrained by springy walls[J].Journal of the Mechanics and Physics of Solids,2015,78:443-466.
[79]Johancsik C A,Friesen D B,Dawson R.Torque and drag in directional wells-prediction and measurement[R].SPE 11380,1984.
[80]Sheppard M C,Wick C,Burgess T.Designing well paths to reduce drag and torque[R].SPE15463,1987.
[81]Ho H S.An improved modeling program for computing the torque and drag in directional and deep wells[R].SPE18047,1988.
[82]李子丰,刘希圣.水平井钻柱稳态拉力—扭矩模型及其应用[J].石油钻探技术,1992,20(4):1-6.Li Zifeng,Liu Xisheng.Steady tension-torque model for drillstring in horizontal wells and its application[J].Petroleum Drilling Techniques,1992,20(4):1-6.
[83]Li Zifeng,Liu Xisheng,Zhou Daqian,et al.A steady tensiontorque model for drillstring in horizontal wells[R].SPE26295,1993.
[84]李子丰,李相方,单志刚.海底大位移井井眼净化程度和卡钻可能性监测[J].石油钻探技术,2000,28(5):4-6.Li Zifeng,Li Xiangfang,Shan Zhigang.Monitoring wellbore cleaning degree and sticking possibility in offshore extended wells[J].Petroleum Drilling Techniques,2000,28(5):4-6.
[85]李子丰,李敬媛,孔凡君.钻柱拉力—扭矩模型述评[J].石油机械,1993,21(8):43-46.Li Zifeng.Li Jingyuan,Kong Fanjun.Comment on tensiontorque model of drillstrings[J].China Petroleum Machinery,1993,21(8):43-46.
[86]李子丰,蒋恕,阳鑫军.油气井杆管柱力学研究现状和发展方向[J].石油机械,2002,30(12):30-33.Li Zifeng,Jiangshu,Yang Xinjun.Current status and developing trend of mechanical study of rod and pipe strings in oil and gas wells[J].China Petroleum Machinery,2002,30(12):30-33.
[87]Tikhonov V,Valiullin K,Nurgaleev A,et al.Dynamic model for stiff-string torque and drag(see associated supplementary discussion)[J].SPE Drilling&Completion,2014,29(3):279-294.
[88]Li Zifeng.Comments on“dynamic model for stiff-string torque and drag”[published by Tikhonov,Vadim;Valiullin,Khaydar;Nurgaleev,Albert;Ring,Lev;Gandikota,Raju;Chaguine,Pavel;Cheatham,Curtis,SPE Drill.Compl.29(3)279-294][J].Journal of Petroleum Science and Engineering,2015,133:824-825.
[89]杨勇,邵兵,王风锐,等.复杂结构井管柱力学模型及动态三维数字井筒[J].石油学报,2015,36(3):385-394.Yang Yong,Shao Bing,Wang Fengrui,et al.String mechanical model for complex-structure wells and dynamic 3D digital shaft[J].Acta Petrolei Sinica,2015,36(3):385-394.
[90]张学鸿,陈抡元,刘巨保.整体钻柱力学接触有限元分析[J].石油学报,1992,13(3):102-108.Zhang Xuehong,Chen Lunyuan,Liu Jubao.Finite element analysis of the contact and friction of a whole drillpipe string[J].Acta Petrolei Sinica,1992,13(3):102-108.
[91]帅健,吕英民,蔡强康.全井中钻柱的有限元模型及应用[J].石油学报,1995,16(1):118-126.Shuai Jian,LüYingmin,Cai Qiangkang.Finite element model of the drill string in a whole well bore and its application[J].Acta Petrolei Sinica,1995,16(1):118-126.
[92]郭永峰,金晓剑,谭树人.非线性有限元法预测近海水平井钻进摩阻[J].中国造船,2003,44(2):61-66.Guo Yongfeng,Jin Xiaojian,Tan Shuren.Prediction of drilling drag and torque in horizontal wells of offshore oilfield by nonlinear FEM[J].Ship Building of China,2003,44(2):61-66.
[93]付建红,龚龙祥,胡顺渠,等.基于ANSYS的水平井下套管摩阻分析计算[J].石油钻采工艺,2007,29(4):32-35.Fu Jianhong,Gong Longxiang,Hu Shunqu,et al.Calculation of frictional drag of casing running in horizontal well based on ANSYS[J].Oil Drilling&Production Technology,2007,29(4):32-35.
[94]祝效华,童华,刘清友,等.基于钻柱系统动力学的摩阻扭矩计算新方法[J].系统仿真学报,2007,19(21):4853-4856.Zhu Xiaohua,Tong Hua,Liu Qingyou,et al.New method on calculation of torque and drag based on drilling string system dynamics[J].Journal of System Simulation,2007,19(21):4853-4856.
[95]付加胜,李根生,史怀忠,等.井下振动减摩技术研究进展[J].石油机械,2012,40(10):6-10.Fu Jiasheng,Li Gensheng,Shi Huaizhong,et al.Research progress of the downhole vibration antifriction technology[J].China Petroleum Machinery,2012,40(10):6-10.
[96]张云飞,贺会群,都亚男,等.连续管井下减阻器研究进展[J].石油机械,2015,43(7):36-41.Zhang Yunfei,He Huiqun,Du Ya’nan,et al.The development of downhole drag reduction device for coiled tubing[J].China Petroleum Machinery,2015,43(7):36-41.
[97]王鹏,倪红坚,王瑞和,等.基于微凸体接触的钻柱纵向振动减摩阻[J].中国石油大学学报:自然科学版,2015,39(1):88-94.Wang Peng,Ni Hongjian,Wang Ruihe,et al.Friction reduction research of drill-string longitudinal vibration based on asperity contact[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(1):88-94.
[98]李子丰,杨海滨,许春田,等.定向井滑动钻进送钻原理与技术[J].天然气工业,2013,33(12):94-98.Li Zifeng,Yang Haibin,Xu Chuntian,et al.Bit feed principles and technologies in slide-drilling directional wells[J].Natural Gas Industry,2013,33(12):94-98.
[99]Walker B H,Friedman M B.Three-dimensional force and deflection analysis of a variable cross section drill string[J].Journal of Pressure Vessel Technology,1977,99(2):367-373.
[100]Millheim K K,Apostal M C.The effect of bottomhole assembly dynamics on the trajectory of a bit[J].Journal of Petroleum Technology,1981,33(12):2323-2338.
[101]Ho H S.General formulation of drillstring under large deformation and its use in BHA analysis[R].SPE15562,1986.
[102]白家祉.应用纵横弯曲连续梁理论求解钻具组合的受力与变形[C]∥北京国际石油工程会议论文集.北京:北京国际石油工程,1982:67-69.Bai Jiazhi.Bottom hole assembly problems solved by beam-column theory[C]∥Beijing International Petroleum Engineering Conference Proceedings.Beijing:Beijing International Petroleum Engineering,1982:67-69.
[103]白家祉,林小敏.纵横弯曲法对钻具组合的二维分析[J].石油学报,1985,6(3):75-84.Bai Jiazhi,Lin Xiaomin.Two-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1985,6(3):75-84.
[104]白家祉,黄惠泽,刘玉石.纵横弯曲法对钻具组合的三维分析[J].石油学报,1989,10(2):60-66.Bai Jiazhi,Huang Huize,Liu Yushi.Three-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1989,10(2):60-66.
[105]苏义脑,白家祉.用纵横弯曲法对弯接头——井下动力钻具组合的三维分析[J].石油学报,1991,12(3):110-120.Su Yi'nao,Bai Jiazhi.Three-dimensional analysis of down hole motor with bent sub using beam-column theory[J].Acta Petrolei Sinica,1991,12(3):110-120.
[106]苏义脑,唐雪平,陈祖锡.初弯曲纵横弯曲梁的等效载荷法及其应用[J].力学与实践,2004,26(1):42-44.Su Yi’nao,Tang Xueping,Chen Zuxi.Equivalent loading method for solving beam-column with initial bending and its application in drilling engineering[J].Mechanics in Engineering,2004,26(1):42-44.
[107]刘希圣,高德利,崔孝秉.底部钻具组合三维静力分析的权余法[J].石油大学学报:自然科学版,1988,12(3):58-67.Liu Xisheng,Gao Deli,Cui Xiaobing.Weighted residuals method for Three-dimension static analysis of bottom hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1988,12(3):58-67.
[108]高德利.钻头与地层相互作用研究、BHA权余法分析及井眼轨迹控制技术[D].北京:石油大学,1990.Gao Deli.Research on rock-bit interaction,BHA weighted residuals method analysis and well path control[D].Beijing:University of Petroleum,China,1990.
[109]高德利,徐秉业.石油钻井底部钻具组合大挠度三维分析[J].应用力学学报,1995,12(1):53-62.Gao Deli,Xu Bingye.Three-dimensional analysis of the static behavior of BHA under large deflection[J].Chinese Journal of Applied Mechanics,1995,12(1):53-62.
[110]高德利.井眼轨迹控制问题的力学分析方法[J].石油学报,1996,17(1):115-121.Gao Deli.A mechanical model for prediction and control of the wellbore trajectory[J].Acta Petrolei Sinica,1996,17(1):115-121.
[111]郭宗禄,高德利,杨文强,等.下部钻具组合上切点的位置确定方法[J].石油钻探技术,2014,42(2):46-51.Guo Zonglu,Gao Deli,Yang Wenqiang,et al.A method for determining upper tangential point at bottomhole assembly[J].Petroleum Drilling Techniques,2014,42(2):46-51.
[112]李子丰.定向水平井钻柱拉力-扭矩模型、导向钻具大小挠度力学分析及轨迹控制理论[D].北京:石油大学,1992.Li Zifeng.A study drillstring tension and torque model in directional/horizontal wells,analysis of the steerable downhole motor assembly under large and small deflections,theory of drilling trajectory control[D].Beijing:University of Petroleum,China,1992.
[113]李子丰,刘希圣.导向钻具组合三维小挠度力学分析[J].石油钻探技术,1993,21(2):1-6.Li Zifeng,Liu Xisheng.3D mechanical analysis method of steering BHA under small defection[J].Petroleum Drilling Techniques,1993,21(2):1-6.
[114]李子丰,刘希圣.下部钻具三维大挠度静力分析[J].石油大学学报:自然科学版,1994,18(4):37-42.Li Zifeng,Liu Xisheng.Static behavior of bottom hole assembly under large defection in 3-D curved borehole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1994,18(4):37-42.
[115]李子丰,孙玉学,刘希圣.井眼轨迹预测的数学模型[J].大庆石油学院学报,1995,19(2):6-9.Li Zifeng,Sun Yuxue,Liu Xisheng.Mathematical model for predicting well bore trajectory[J].Journal of Daqing Petroleum Institute,1995,19(2):6-9.
[116]李子丰.井眼轨道控制理论[M].北京:石油工业出版社,1996:1-93.Li Zifeng.Theory of wellbore trajectory control[M].Beijing:Petroleum Industry Press,1996:1-93.
[117]Li Zifeng,Ma Xingrui,Huang Wenhu,et al.A3D analysis of a bottomhole assembly under large deflection[J].SPE Drilling&Completion,1996,11(2):104-110.
[118]李子丰,赵新瑞,赵德云.通用下部钻具三维小挠度静力分析的数学模型及应用[J].工程力学,2000,17(6):121-129.Li Zifeng,Zhao Xinrui,Zhao Deyun.A methematical model for 3D analysis of general bottomhole assembly under small deflection and its application[J].Engineering Mechanics,2000,17(6):121-129.
[119]赵金海,李子丰,张桂林,等.对不同轴式下部钻具组合动态特性的初探与思考[J].岩土力学,2003,24(S):392-394.Zhao Jinhai,Li Zifeng,Zhang Guilin,et al.A preliminary study on dynamic influencing factors for bottom-hole assembly with bending angle or bias axis[J].Rock and Soil Mechanics,2003,24(S):392-394.
[120]李子丰,赵金海,李敬元.旋转导向钻具三维小挠度稳态分析的数学模型[J].石油学报,2004,25(1):84-88.Li Zifeng,Zhao Jinhai,Li Jingyuan.Mathematical models for 3D analysis of rotary steering bottom hole assembly with small deflection[J].Acta Petrolei Sinica,2004,25(1):84-88.
[121]Li Zifeng,Li Jingyuan.Mathematical models for 3D analysis of rotary steering BHA under small deflection[J].Journal of Energy Resources Technology,2008,130(1):013101.
[122]李子丰,李敬媛.三维钻速方程及其反演模型[J].西部探矿工程,1994,6(2):8-11.Li Zifeng,Li Jingyuan.Three dimensional drilling yelocity equation and its reverse evolution model[J].West-China Exploration Engineering,1994,6(2):8-11.
[123]李敬元,李子丰.井眼轨道预测的实现[J].天然气工业,2005,25(5):62-64.Li Jingyuan,Li Zifeng.Realization of well path prediction[J].Natural Gas Industry,2005,25(5):62-64.
[124]李子丰.钻柱力学研究中几个值得探讨的问题[J].石油机械,1996,24(8):32-35.Li Zifeng.Some problems with study of drillstem mechanics[J].China Petroleum Machinery,1996,24(8):32-35.
[125]蒋恕,李子丰.钻头处的边界条件研究[J].石油钻采工艺,2001,23(4):34-35.Jiang Shu,Li Zifeng.Study on the bit boundary condition[J].Oil Drilling&Production Technology,2001,23(4):34-35.
[126]李子丰,李同林.传统底部钻具组合上切点边界条件的正确性[J].石油钻采工艺,2002,24(1):31-32.Li Zifeng,Li Tonglin.Accuracy of the boundary conditions at the upper tangent of the conventional BHA[J].Oil Drilling&Production Technology,2002,24(1):31-32.
[127]宋执武,高德利.不倒翁式偏心防斜钻具的设计[J].石油机械,2006,34(8):19-20.Song Zhiwu,Gao Deli.Design of a tumbler eccentric and deviation-controlled drilling tool[J].China Petroleum Machinery,2006,34(8):19-20.
[128]宋执武,高德利.自动防斜钻井钻具设计[J].钻采工艺,2007,30(3):1-2.Song Zhiwu,Gao Deli.Design of a drilling tool for vertical drilling automatically[J].Drilling&Production Technology,2007,30(3):1-2.
[129]帅健,蔡强康,吕英民.弯曲井眼中下部钻具组合的有限元分析[J].石油学报,1990,11(4):95-105.Shuai Jian,Cai Qiangkang,LüYingmin.Finite element analysis of BHA in a curved directional well[J].Acta Petrolei Sinica,1990,11(4):95-105.
[130]署恒木,吕英民,蔡强康.有限元法在底部钻具组合动态分析中的应用[J].石油大学学报:自然科学版,1990,14(6):54-61.Shu Hengmu,LüYingmin,Cai Qiangkang.Application of finite element method to dynamic analysis of bottom-hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1990,14(6):54-61.
[131]刘巨保,张学鸿,孙超,等.水平井BHA控制井斜与方位机理及影响因素分析[J].大庆石油学院学报,1997,21(4):68-72.Liu Jubao,Zhang Xuehong,Sun Chao,et al.Analysis of the theory and influence factors for the BHA to control inclination and azimuth in horizontal well[J].Journal of Daqing Petroleum Institute,1997,21(4):68-72.
[132]狄勤丰,王文昌,胡以宝,等.钻柱动力学研究及应用进展[J].天然气工业,2006,26(4):57-59.Di Qinfeng,Wang Wenchang,Hu Yibao,et al.Study and application of drilling string dynamics[J].Natural Gas Industry,2006,26(4):57-59.
[133]胡以宝,狄勤丰,邹海洋,等.钻柱动力学研究及监控技术新进展[J].石油钻探技术,2006,34(6):7-10.Hu Yibao,Di Qinfeng,Zou Haiyang,et al.The new developments of monitoring technology and researches on drill string dynamics[J].Petroleum Drilling Techniques,2006,34(6):7-10.
[134]Wolf S F,Zacksenhouse M,Arian A.Field measurements of downhole drillstring vibrations[R].SPE14330,1985.
[135]Dunayevsky V A,Abbassian F,Judzis A.Dynamic stability of drillstrings under fluctuating weight on bit[R].SPE 14329,1993.
[136]Rey-Fabret I,Mabile M C,Oudin N.Detecting whirling behaviour of the drill string from surface measurements[R].SPE38587,1997.
[137]Jansen J D.Whirl and chaotic motion of stabilized drill collars[R].SPE20930,1992.
[138]章扬烈,肖载阳,端木纲.旋转钻柱运动原理的研究[J].石油矿场机械,1988,17(2):1-7.Zhang Yanglie,Xiao Zaiyang,Duanmu Gang.Research on rotary drill string movement principle[J].Oil Field Equipment,1988,17(2):1-7.
[139]张广清,陈勉,路永明.斜直井段旋转钻柱稳定性试验研究[J].石油钻采工艺,2001,23(1):23-25.Zhang Guangqing,Chen Mian,Lu Yongming.Test study on drilling stem stability of rotary drilling in the slant hole[J].Oil Drilling&Production Technology,2001,23(1):23-25.
[140]管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2003,24(6):102-106.Guan Zhichuan,Jin Yanxin,Wang Yifa.Experimental research on motion behavior of bottom drill string in straight hole[J].Acta Petrolei Sinica,2003,24(6):102-106.
[141]史玉才,王军,朱江,等.下部钻柱反向涡动机理研究[J].石油钻探技术,2007,35(5):43-45.Shi Yucai,Wang Jun,Zhu Jiang,et al.Research on backward whirling mechanism of bottom drillstring[J].Petroleum Drilling Techniques,2007,35(5):43-45.
[142]管志川,邵冬冬,温欣,等.水平井眼中旋转钻柱运动特性的实验研究[J].工程力学,2013,30(5):340-345.Guan Zhichuan,Shao Dongdong,Wen Xin,et al.Experimental research on motion states of bottom drilling string in horizontal well[J].Engineering Mechanics,2013,30(5):340-345.
[143]邵冬冬,管志川,温欣,等.水平旋转钻柱横向振动特性试验[J].中国石油大学学报:自然科学版,2013,37(4):100-103.Shao Dongdong,Guan Zhichuan,Wen Xin,et al.Experiment on lateral vibration characteristics of horizontal rotary drilling string[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(4):100-103.
[144]李子丰,王兆运,阳鑫军,等.钻柱涡动分析及防涡稳定器设计[J].石油钻采工艺,2008,30(3):124-127.Li Zifeng,Wang Zhaoyun,Yang Xinjun,et al.Swirling analysis of drilling strings and anti-whirl stabilizers design[J].Oil Drilling&Production Technology,2008,30(3):124-127.
[145]高岩.三牙轮钻头钻进时钻柱轴向振动的特征[J].石油学报,2000,21(6):93-96.Gao Yan.Axial vibration performance of drill string when drilling with three-cone bit[J].Acta Petrolei Sinica,2000,21(6):93-96.
[146]王珍应,徐铭陶.钻柱纵向受迫振动的广义传递矩阵法[J].石油学报,1990,11(3):107-114.Wang Zhenying,Xu Mingtao.Computing forced longitudinal vibration of drill string by generalized transfer matrix method[J].Acta Petrolei Sinica,1990,11(3):107-114.
[147]刘清友,马德坤,汤小文.钻柱纵向振动模型的建立及求解方法[J].西南石油学院学报,1998,20(4):55-58.Liu Qingyou,Ma Dekun,Tang Xiaowen.The method of solution and establishment for axial vibration model of drilling string[J].Journal of Southwest Petroleum Institute,1998,20(4):55-58.
[148]刘清友,马德坤,钟青.钻柱扭转振动模型的建立及求解[J].石油学报,2000,21(2):78-82.Liu Qingyou,Ma Dekun,Zhong Qing.A drilling string torsional vibration model and its solution[J].Acta Petrolei Sinica,2000,21(2):78-82.
[149]吴泽兵,马德坤,况雨春.钻柱纵向振动仿真分析[J].石油学报,2000,21(3):73-76.Wu Zebing,Ma Dekun,Kuang Yuchun.Simulation of drill string’s longitudinal vibration[J].Acta Petrolei Sinica,2000,21(3):73-76.
[150]李子丰,于成金,李敬元.钻柱耦合振动[J].石油钻探技术,1992,20(2):16-17.Li Zifeng,Yu Chengjin,Li Jingyuan.Drillstring coupled vibration[J].Petroleum Drilling Techniques,1992,20(2):16-17.
[151]李子丰,李志刚.钻柱纵向振动分析[J].天然气工业,2004,24(6):70-73.Li Zifeng,Li Zhigang.Analysis of longitudinal vibration of drillstring[J].Natural Gas Industry,2004,24(6):70-73.
[152]李子丰,张永贵,侯绪田,等.钻柱纵向和扭转振动分析[J].工程力学,2004,21(6):203-210.Li Zifeng,Zhang Yonggui,Hou Xutian,et al.Analysis of longitudinal and torsion vibration of drillstring[J].Engineering Mechanics,2004,21(6):203-210.
[153]Li Zifeng,Guo Boyun.Analysis of longitudinal vibration of drill string in air and gas drilling[R].SPE107697,2007.
[154]王文龙,李子丰.不同激振条件下减振器对钻柱纵向振动的影响[J].工程力学,2011,28(4):221-225.Wang Wenlong,Li Zifeng.Influence of shock absorber on longitudinal vibration of drill string under different vibration inducing conditions[J].Engineering Mechanics,2011,28(4):221-225.
[155]李子丰.对“钻柱纵向振动分析”一文的质疑[J].石油钻探技术,1989,17(1):62.Li Zifeng.Comments on“drill string longitudinal vibration analysis”[J].Petroleum Drilling Techniques,1989,17(1):62.
[156]王文龙,胡群爱,刘化伟,等.钻柱纵向振动分析与应用[J].振动与冲击,2011,30(6):229-233.Wang Wenlong,Hu Qun’ai,Liu Huawei,et al.Analysis on longitudinal vibration of drill string and the corresponding application[J].Journal of Vibration and Shock,2011,30(6):229-233.
[157]Liu Xianbo,Vlajic N,Long Xinhua,et al.Nonlinear motions of a flexible rotor with a drill bit:stick-slip and delay effects[J].Nonlinear Dynamics,2013,72(1/2):61-77.
[158]Liu Xianbo,Vlajic N,Long Xinhua,et al.Coupled axial-torsional dynamics in rotary drilling with state-dependent delay:stability and control[J].Nonlinear Dynamics,2014,78(3):1891-1906.
[159]Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(10):051008.
[160]Burgess T M,McDaniel G L,Das P K.Improving BHA tool reliability with drillstring vibration models:field experience and limitations[R].SPE16109,1987.
[161]Dykstra M W,Chen D C K,Warren T M,et al.Drillstring component mass imbalance:a major source of downhole vibrations[R].SPE29350,1996.
[162]Dykstra M W,Chen D C K,Warren T M.Experimental evaluations of drill bit and drill string dynamics[R].SPE28323,1994.
[163]Heisig G,Neubert M.Lateral drillstring vibrations in extendedreach wells[R].SPE59235,2000.
[164]Liao C M,Balachandran B,Karkoub M,et al.Drill-string dynamics:reduced-order models and experimental studies[J].Journal of Vibration and Acoustics,2011,133(4):041008.
[165]Liao C M,Vlajic N,Karki H,et al.Parametric studies on drillstring motions[J].International Journal of Mechanical Sciences,2012,54(1):260-268.
[166]Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-stringvibration[J].Journal of Sound and Vibration,2013,332(10):2575-2592.
[167]Vlajic N,Liao C M,Karki H,et al.Draft:stick-slip motions of a rotor-stator system[J].Journal of Vibration and Acoustics,2013,136(2):021005.
[168]Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(5):051008.
[169]Chatjigeorgiou I K.Numerical simulation of the chaotic lateral vibrations of long rotating beams[J].Applied Mathematics and Computation,2013,219(10):5592-5612.
[170]Thompson J M T,van der Heijden G H M.A graphical criterion for the instability of elastic equilibria under multiple loads:with applications to drill-strings[J].International Journal of Mechanical Sciences,2013,68:160-170.
[171]Vlajic N,Fitzgerald T,Nguyen V,et al.Geometrically exact planar beams with initial pre-stress and large curvature:static configurations,natural frequencies,and mode shapes[J].International Journal of Solids and Structures,2014,51(19/20):3361-3371.
[172]姚建林,狄勤丰,胡以宝,等.空气钻井斜直井眼中钻柱的动力学特性及失效机理[J].中国石油大学学报:自然科学版,2008,32(3):63-67.Yao Jianlin,Di Qinfeng,Hu Yibao,et al.Dynamic characteristics and failure mechanism of drill string in straight hole with air drilling[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):63-67.
[173]狄勤丰,朱卫平,姚建林,等.空气钻井钻具组合动力学特征及井斜机理研究[J].石油学报,2008,29(6):917-921.Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic features of bottom hole assembly and borehole deviation mechanism in air drilling[J].Acta Petrolei Sinica,2008,29(6):917-921.
[174]狄勤丰,王文昌,姚永汉,等.底部钻具组合动力学模型及涡动特性仿真[J].中国石油大学学报:自然科学版,2010,34(3):53-56.Di Qinfeng,Wang Wenchang,Yao Yonghan,et al.Dynamics model and whirl features’simulation of bottom hole assembly[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(3):53-56.
[175]胡以宝,狄勤丰,王文昌,等.斜直井眼中转速对钻柱动力学特性的影响[J].工程力学,2010,27(5):184-190.Hu Yibao,Di Qinfeng,Wang Wenchang,et al.Influence of rotary table speed on the dynamic characteristics of drillsting in inclined straight hole[J].Engineering Mechanics,2010,27(5):184-190.
[176]罗敏.管道内旋转细长梁固液耦合动力学分析[D].大庆:大庆石油学院,2009.Luo Min.Fluid-structure interaction dynamic analysis of rotary slender beam in pipe[D].Daqing:Daqing Petroleum Institute,2009.
[177]张强,刘巨保,罗敏,等.圆筒内旋转细长管与流体界面耦合的数值方法[J].计算力学学报,2011,28(4):601-606.Zhang Qiang,Liu Jubao,Luo Min,et al.Numerical simulation on interface coupling of rotary slender pipe and fluid in cylinder[J].Chinese Journal of Computational Mechanics,2011,28(4):601-606.
[178]刘巨保,罗敏,王琳,等.管道内旋转细长梁的固液耦合方法研究[J].工程力学,2011,28(4):251-256.Liu Jubao,Luo Min,Wang Lin,et al.Methodology of fluidstructure interaction of rotary slender beam in pipe[J].Engineering Mechanics,2011,28(4):251-256.
[179]祝效华,刘清友,童华.三维井眼全井钻柱系统动力学模型研究[J].石油学报,2008,29(2):288-291.Zhu Xiaohua,Liu Qingyou,Tong Hua.Research on dynamics model of full hole drilling-string system with three-dimensional trajectory[J].Acta Petrolei Sinica,2008,29(2):288-291.
[180]祝效华,贾彦杰,童华.气体钻井钻柱振动特性及控制措施[J].石油学报,2012,33(2):293-297.Zhu Xiaohua,Jia Yanjie,Tong Hua.Vibrating characteristics of drill string in gas drilling and its control measures[J].Acta Petrolei Sinica,2012,33(2):293-297.
[181]祝效华,胡志强.基于钻头破岩钻进的下部钻具横向振动特性研究[J].振动与冲击,2014,33(17):90-93.Zhu Xiaohua,Hu Zhiqiang.Lateral vibration characteristics analysis of a bottom hole assembly based on interaction between bit and rock[J].Journal of Vibration and Shock,2014,33(17):90-93.
[182]屈展,张绍槐.内含钻井液的钻柱涡动动力特性分析[J].天然气工业,1994,14(1):46-48.Qu Zhan,Zhang Shaohuai.Analysing dynamic characteristics of drilling string eddy of inside containing drill fluid[J].Natural Gas Industry,1994,14(1):46-48.
[183]屈展.钻井液流体力引起旋转石油钻柱涡动的理论分析[J].力学与实践,1994,16(3):49-51.Qu Zhan.Theoretical analysis of drilling fluid cause rotary drill string whirl[J].Mechanics in Engineering,1994,16(3):49-51.
[184]屈展,徐健学.内外钻井液作用下的旋转钻柱涡动分析[J].西安石油学院学报:自然科学版,1997,12(1):27-29.Qu Zhan,Xu Jianxue.Whirling analysis of the rotary drill string by the action of drilling fluid inside and outside the drill string[J].Journal of Xi'an Petroleum Institute:Natural Science Edition,1997,12(1):27-29.
[185]肖文生,张扬,钟毅芳.钻柱在钻井液和井壁摩阻共同作用下的涡动[J].中国机械工程,2004,15(4):334-338.Xiao Wensheng,Zhang Yang,Zhong Yifang.Annulus whirling motion analysis of the rotary drill string under the actions of rubs between well-walls and drilling fluids[J].China Mechanical Engineering,2004,15(4):334-338.
[186]李子丰,李敬元,马兴瑞,等.钻柱自转和公转诱发牛顿液体层流流动的数学模型[J].力学与实践,1995,17(5):51-52.Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Mathematical model of Newton liquid laminar flow induced by drillstring rotation and revolution[J].Mechanics in Engineering,1995,17(5):51-52.
[187]崔海清,刘希圣.幂律流体偏心环空螺旋流中的二次流问题[J].水动力学研究与进展,1995,10(6):610-620.Cui Haiqing,Liu Xisheng.On the secondary flow in the helical flow of the power-law fluids in eccentric annuli[J].Journal of Hydrodynamics,1995,10(6):610-620.
[188]崔海清,刘希圣.非牛顿流体偏心环形空间螺旋流的速度分布[J].石油学报,1996,17(2):76-83.Cui Haiqing,Liu Xisheng.Velocity distribution of helical flow of non-Newtonian fluid in eccentric annuli[J].Acta Petrolei Sinica,1996,17(2):76-83.
[189]崔海清,季海军,蔡萌,等.流体在内管做行星运动的环空中流动的二次流[J].大庆石油学院学报,2005,29(2):16-18.Cui Haiqing,Ji Haijun,Cai Meng,et al.The secondary flow in Newtonian fluid flow in annulus with the inner cylinder executing aplanetary motion[J].Journal of Daqing Petroleum Institute,2005,29(2):16-18.
[190]崔海清,裴晓含,蔡萌.幂律流体在内管做行星运动的环空中流动的二次流[J].石油学报,2007,28(1):134-138.Cui Haiqing,Pei Xiaohan,Cai Meng.Secondary flow of powerlaw fluid flow in annulus with inner cylinder executing aplanetary motion[J].Acta Petrolei Sinica,2007,28(1):134-138.
[191]崔海清,修德艳,裴晓含,等.幂律流体在内管做行星运动的环空中流动时的内管法向应力分布[J].中国石油大学学报:自然科学版,2007,31(1):67-71.Cui Haiqing,Xiu Deyan,Pei Xiaohan,et al.Normal stress distribution on the inner cylinder forced by power law fluid flowing in annulus with inner cylinder executing aplanetary motion[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):67-71.
[192]李子丰.钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合[J].石油学报,2013,34(3):607-610.Li Zifeng.An inevitable way in drill-string whirling research:Combination of drilling fluid power lubrication with drill string dynamics[J].Acta Petrolei Sinica,2013,34(3):607-610.
[193]Yigit A S,Christoforou A P.Coupled axial and transverse vibrations of oilwell drillstrings[J].Journal of Sound and Vibration,1996,195(4):617-627.
[194]Christoforou A P,Yigit A S.Active control of stick-slip vibrations:the role of fully coupled dynamics[R].SPE68093,2001.
[195]Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-string vibration[J].Journal of Sound and Vibration,2013,332:2575-2592.
[196]Nandakumar K,Wiercigroch M.Galerkin projections for statedependent delay differential equations with applications to drilling[J].Applied Mathematical Modeling,2013,37:1705-1722.
[197]Divenyi S,Savi MA,Wiercigroch M,et al.Drill-string vibration analysis using non-smooth dynamics approach[J].Nonlinear Dynamics,2012,70:1017-1035.
[198]Kapitaniak M,Hamaneh VV,Chávez JP,et al.Unveiling complexity of drill-string vibrations:Experiments and modeling[J].International Journal of Mechanical Sciences,2015,101-102:324-327.
[199]狄勤丰,吴玉禄,石向前.预弯曲动力学防斜打快技术初探[J].石油学报,2003,24(3):86-89.Di Qinfeng,Wu Yulu,Shi Xiangqian.Primary research on vertical and fast drilling technology with pre-bending dynamic method[J].Acta Petrolei Sinica,2003,24(3):86-89.
[200]狄勤丰,朱卫平,姚建林,等.预弯曲动力学防斜打快钻具组合动力学模型[J].石油学报,2007,28(6):118-121.Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic model of bottom hole assembly used in pre-bending dynamic vertical and fast drilling technology[J].Acta Petrolei Sinica,2007,28(6):118-121.
[201]李子丰,赵金海,蒋恕.公转下部钻具受力与轨道控制的初步分析[J].石油钻采工艺,2003,25(6):35-37.Li Zifeng,Zhao Jinhai,Jiang Shu.Preliminary study on influencing factors of the forces and trajectory control for bottom-hole assembly[J].Oil Drilling&Production Technology,2003,25(6):35-37.
[202]Ritto T G,Escalante M R,Sampaio R,et al.Drill-string horizontal dynamics with uncertainty on the frictional force[J].Journal of Sound and Vibration,2013,332(1):145-153.
[203]Ritto T G,Sampaio R.Measuring the efficiency of vertical drillstrings:a vibration perspective[J].Mechanics Research Communications,2013,52:32-39.
[204]Ritto T G.Bayesian approach to identify the bit-rock interaction parameters of a drill-string dynamical model[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2015,37(4):1173-1182.
[205]李茂华,徐守余,牛卫东.套管损坏建模方法简述[J].石油机械,2008,36(4):76-80.Li Maohua,Xu Shouyu,Niu Weidong.Modeling approach briefly of casing damage[J].China Petroleum Machinery,2008,36(4):76-80.
[206]房军,赵怀文,岳伯谦,等.非均匀地应力作用下套管与水泥环的受力分析[J].石油大学学报:自然科学版,1995,19(6):52-57.Fang Jun,Zhao Huaiwen,Yue Boqian,et al.Analysis of loading propekty of casing and cement sheath under nonuniform geologic stress[J].Journal of the University of Petroleum,China:Edition of Natural Science,1995,19(6):52-57.
[207]房军,岳伯谦,赵怀文,等.非均匀地应力作用下套管和水泥环表面受力特性分析[J].石油大学学报:自然科学版,1997,21(1):46-48.Fang Jun,Yue Boqian,Zhao Huaiwen,et al.Buckling critical load of drill string for vertical plane in inclined hole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1997,21(1):46-48.
[208]房军,谷玉洪,米丰珍.非均匀载荷作用下套管挤压失效数值分析[J].石油机械,1999,27(7):34-37.Fang Jun,Gu Yuhong,Mi Fengzhen.A numerical analysis of casing collapse under nonuniform load[J].China Petroleum Machinery,1999,27(7):34-37.
[209]李志明,张颜福,王计平,等.蠕变地层中套管的附加载荷[J].石油钻采工艺,1999,21(5):10-13.Li Zhiming,Zhang Yanfu,Wang Jiping,et al.Addtional load of casing used in creep formation[J].Oil Drilling&Production Technology,1999,21(5):10-13.
[210]殷有泉,李志明,张广清,等.蠕变地层套管载荷分析研究[J].岩石力学与工程学报,2004,23(14):2381-2384.Yin Youquan,Li Zhiming,Zhang Guangqing,et al.Study on casing loads in creep formations[J].Chinese Journal of Rock Mechanics and Engineering,2004,23(14):2381-2384.
[211]殷有泉,蔡永恩,陈朝伟,等.非均匀地应力场中套管载荷的理论解[J].石油学报,2006,27(4):133-138.Yin Youquan,Cai Yong’en,Chen Zhaowei,et al.Theoretical solution of casing loading in non-uniform ground stress field[J].Acta Petrolei Sinica,2006,27(4):133-138.
[212]殷有泉,陈朝伟,李平恩.套管-水泥环-地层应力分布的理论解[J].力学学报,2006,38(6):835-842.Yin Youquan,Chen Zhaowei,Li Ping’en.Theoretical solutions of stress distribution in casing-cement and stratum system[J].Chinese Journal of Theoretical and Applied Mechanics,2006,38(6):835-842.
[213]李平恩,殷有泉,苏先樾.流变地层地应力场中套管载荷的理论解[J].北京大学学报:自然科学版,2007,43(1):11-16.Li Ping’en,Yin Youquan,Su Xianyue.Theoretical solution of casing loads in rheological formation in tectonic stress field[J].Acta Scientiarum Naturalium Universitatis Pekinensis,2007,43(1):11-16.
[214]陈朝伟,殷有泉,蔡永恩,等.利用套管变形测井资料反演储层应力场[J].岩石力学与工程学报,2007,26(4):734-739.Chen Zhaowei,Yin Youquan,Cai Yong'en,et al.Back analysis of reservoir stress field with logging data of casing deformation[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(4):734-739.
[215]李子丰,杨敏嘉,李邦达.油井套管损坏的机理分析[J].石油钻采工艺,1985,7(4):47-53.Li Zifeng,Yang Minjia,Li Bangda.Analysis of mechanism on production casing failure[J].Oil Drilling&Production Technology,1985,7(4):47-53.
[216]李子丰,张永贵,阳鑫军.蠕变地层与油井套管相互作用力学模型[J].石油学报,2009,30(1):129-131.Li Zifeng,Zhang Yonggui,Yang Xinjun.Mechanics model for interaction between creep formation and oil well casing[J].Acta Petrolei Sinica,2009,30(1):129-131.
[217]尹虎,李黔,李建涛,等.利用套管变形量进行地应力反演[J].石油钻探技术,2012,40(3):54-57.Yin Hu,Li Qian,Li Jiantao,et al.Inversion of in-situ stress with the amount of casing deformation[J].Petroleum Drilling Techniques,2012,40(3):54-57.
[218]王力军,于永南,侯兴华,等.非均匀地应力下蠕变地层套管的载荷与变形关系[J].科学技术与工程,2013,13(5):1229-1233.Wang Lijun,Yu Yongnan,Hou Xinghua,et al.Study on casing loads and deformation with non-uniform in-situ stresses in creep stratum[J].Science Technology and Engineering,2013,13(5):1229-1233.
[219]李增亮,蔡俐娜,王木乐,等.地应力方向对椭圆套管强度的影响规律分析[J].石油机械,2013,41(11):14-16.Li Zengliang,Cai Lina,Wang Mule,et al.Analysis of the influence law of ground stress direction on elliptic casing strength[J].China Petroleum Machinery,2013,41(11):14-16.
[220]王宴滨,高德利,房军.套管-水泥环-地层多层组合系统受力特性分析[J].应用力学学报,2014,31(3):387-392.Wang Yanbin,Gao Deli,Fang Jun.Mechanical characteristics analysis of casing-cement ring-formation multilayer composite system[J].Chinese Journal of Applied Mechanics,2014,31(3):387-392.
[221]刘海龙,邓金根,赵军,等.非均匀地应力下水泥环完整性规律研究[J].科学技术与工程,2014,14(23):37-41.Liu Hailong,Deng Jingen,Zhao Jun,et al.Study on cement sheath integrity under non-uniform situ-stress[J].Science Technology and Engineering,2014,14(23):37-41.
[222]屈展,王小增,窦益华,等.非均匀载荷作用下偏心磨损套管稳定性准则[J].工程力学,2015,32(7):249-256.Qu Zhan,Wang Xiaozeng,Dou Yihua,et al.Stability criterion of eccentric worn casing under the nonuniform external loadings[J].Engineering Mechanics,2015,32(7):249-256.
[223]Yin Fei,Gao Deli.Mechanical analysis and design of casing in directional well under in-situ stresses[J].Journal of Natural Gas Science and Engineering,2014,20:285-291.
[224]陈朝伟.流变性地层套管等效外挤力[J].石油学报,2012,33(4):702-705.Chen Zhaowei.Equivalent external casing pressure in rheological strata[J].Acta Petrolei Sinica,2012,33(4):702-705.
[225]翟晓鹏,楼一珊,曹砚峰,等.蠕变岩层地层刚度和松弛时间对套管外挤力的影响[J].石油学报,2015,36(10):1299-1304.Zhai Xiaopeng,Lou Yishan,Cao Yanfeng,et al.Influences of stratum stiffness and relaxation time of creep layers on external squeeze pressure of casing[J].Acta Petrolei Sinica,2015,36(10):1299-1304.
[226]李子丰,杨海军,陈飞.蠕变性地层中套管有效外挤压力的计算方法探讨[J].石油钻探技术,2014,42(3):13-15.Li Zifeng,Yang Haijun,Chen Fei.The calculation of the effective external pressure on casing in creep formation[J].Petroleum Drilling Techniques,2014,42(3):13-15.
[227]宋吉水,张国亮,刘绍轩,等.射孔对套管抗挤强度影响[J].辽宁工程技术大学学报:自然科学版,2008,27(4):523-525.Song Jishui,Zhang Guoliang,Liu Shaoxuan,et al.Effect produced by perforation on counter-extrusion intensity of casing[J].Journal of Liaoning Technical University:Natural Science,2008,27(4):523-525.
[228]廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27(2):250-256.Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultradeep wells[J].Engineering Mechanics,2010,27(2):250-256.
[229]许志倩,闫相祯,杨秀娟.CO2腐蚀对套管强度动态影响分析[J].机械工程学报,2014,50(1):169-177.Xu Zhiqian,Yan Xiangzhen,Yang Xiujuan.Strength time varying analysis of casing with CO2 corrosion defects[J].Journal of Mechanical Engineering,2014,50(1):169-177.
[230]赵均海,李艳,张常光,等.基于统一强度理论的石油套管柱抗挤强度[J].石油学报,2013,34(5):969-976.Zhao Junhai,Li Yan,Zhang Changguang,et al.Collapsing strength for petroleum casing string based on unified strength theory[J].Acta Petrolei Sinica,2013,34(5):969-976.
[231]李艳,赵均海,李楠,等.基于统一强度理论的厚壁套管柱三轴抗拉强度[J].工程力学,2015,32(1):234-240.Li Yan,Zhao Junhai,Li Nan,et al.Tri-axial tension strength of thick-walled casing strings based on unified strength theory[J].Engineering Mechanics,2015,32(1):234-240.
[232]陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:261-262.Chen Tinggen,Guan Zhichuan.Theory and technology of drilling engineering[M].Dongying:China University of Petroleum Press,2000:261-262.
[233]赵怀文.关于管的抗挤计算的若干问题——答“试论套管挤压理论中的几个问题”[J].石油矿场机械,1981(2):17-31.Zhao Huaiwen.Some problems about pipe collapsing calculation-answer to“try to discuss about several problems of the theory of casing extrusion”[J].Oil Field Equipment,1981(2):17-31.
[234]龚伟安.再论不均壁厚圆管的弹性失稳问题[J].石油钻采工艺,1997,19(4):21-28.Gong Wei’an.Study second time on loss of stability of thick circular pipe of non-uniform wall thickness[J].Oil Drilling&Production Technology,1997,19(4):21-28.
[235]韩志勇.对双向应力椭圆理论的质疑[J].石油大学学报:自然科学版,2000,24(2):21-24.Han Zhiyong.Questions to the ellipse of plasticity[J].Journal of the University of Petroleum,China:Edition of Natural Science,2000,24(2):21-24.
[236]韩志勇.对我国《套管柱强度设计方法》标准的疑问[J].石油钻探技术,2004,32(5):1-5.Han Zhiyong.Discussion on the revised standard-design method for casing string strength[J].Petroleum Drilling Techniques,2004,32(5):1-5.
[237]韩志勇.关于套管柱三轴抗挤强度设计问题的讨论[J].石油大学学报:自然科学版,2004,28(5):43-48.Han Zhiyong.Discussion on the new design standard for tri-axial stress anti-collapse strength of casing string[J].Journal of the University of Petroleum,China:Edition of Natural Science,2004,28(5):43-48.
[238]韩志勇.对《套管柱井口悬挂载荷计算方法》的几点意见[J].石油钻探技术,2011,39(1):1-5.Han Zhiyong.Comments on industry standard“wellhead casing suspended load calculation method”[J].Petroleum Drilling Techniques,2011,39(1):1-5.
[239]韩志勇.关于“套管柱三轴抗拉强度公式”的讨论[J].中国石油大学学报:自然科学版,2011,35(4):77-80.Han Zhiyong.Discussing on formula of tri-axial tension strength of casing string[J].Journal of China university of Petroleum:Edition of Natural Science,2011,35(4):77-80.
[240]韩来聚,贾江鸿,闫振来.基于应变的热采井套管设计方法[J].中国石油大学学报:自然科学版,2014,38(3):68-72.Han Laiju,Jia Jianghong,Yan Zhenlai.A casing design method based on strain variations for wells in thermal recovery processes[J].Journal of China University of Petroleum:Edition of Natural Science,2014,38(3):68-72.
[241]李子丰,吴德华,黄跃芳,等.井筒—地层动态温度场数学模型[J].石油钻采工艺,1996,18(1):54-58.Li Zifeng,Wu Dehua,Huang Yuefang,et al.Mathematical model for temperature field of wellbore and formation[J].Oil Drilling&Production Technology,1996,18(1):54-58.
[242]李子丰,吴德华,黄跃芳,等.套管柱和注汽管柱热弹性力学分析[J].石油钻采工艺,1995,17(6):62-68.Li Zifeng,Wu Dehua,Huang Yuefang,et al.Thermoplastic mechanics analysis of casing string and tubing string during injecting steam[J].Oil Drilling&Production Technology,1995,17(6):62-68.
[243]李子丰,马兴瑞,黄文虎,等.热采井套管柱力学分析[J].工程力学,1998,15(2):19-26.Li Zifeng,Ma Xingrui,Huang Wenhu,et al.Mechanical analysis of casing in thermal recovery wells[J].Engineering Mechanics,1998,15(2):19-26.
[244]李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预压固井技术[J].工程力学,2008,25(6):219-224.Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.Casing cementing with internal prepressurization for thermal recovery wells[J].Engineering Mechanics,2008,25(6):219-224.
[245]Li Zifeng.Casing cementing with half warm-up for thermal recovery wells[J].Journal of Petroleum Science and Engineering,2008,61(2/4):94-98.
[246]Li Zifeng.Casing cementing with internal pre-pressurization for thermal recovery wells[J].Journal of Canadian Petroleum Technology,2008,47(12):44-49.
[247]李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预膨胀固井技术[J].固体力学学报,2009,30(2):162-169.Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.The pre-expansion technique to protect casing from thermal failure in thermal recovery wells[J].Chinese Journal of Solid Mechanics,2009,30(2):162-169.
[248]梁政,邓雄.高温高压深井测试管柱力学研究初探[J].天然气工业,1998,18(4):62-65.Liang Zheng,Deng Xiong.Primary discussion on the mechanical analysis of high temperature high pressure deep well testing pipe string[J].Natural Gas Industry,1998,18(4):62-65.
[249]邓雄,梁政,余孝林.高温高压深井测试管柱三维力学分析[J].天然气工业,2000,20(4):54-57.Deng Xiong,Liang Zheng,Yu Xiaolin.Three dimensional mechanic analysis of the testing string in deep well with high temperature and high pressure[J].Natural Gas Industry,2000,20(4):54-57.
[250]高宝奎,高德利.高温高压井测试管柱变形增量计算模型[J].天然气工业,2002,22(6):52-54.Gao Baokui,Gao Deli.Incremental calculation model of testing string deformation in a high-temperature and high-pressure well[J].Natural Gas Industry,2002,22(6):52-54.
[251]于振东,李艳.试油测试射孔管柱的间隙元分析[J].应用力学学报,2003,20(1):73-77.Yu Zhendong,Li Yan.Finite clearance element analysis of perforation tube string for testing for oil[J].Chinese Journal of Applied Mechanics,2003,20(1):73-77.
[252]Li Zifeng.Mechanical analysis of tubing string in well testing operation[J].Journal of Petroleum Science and Engineering,2012,90-91:61-69.
[253]李敬元,李子丰,马兴瑞,等.热采井注汽管柱力学分析[J].工程力学,1998,15(3):51-60.Li Jingyuan,Li Zifeng,Ma Xingrui,et al.Mechanics analysis of tubing in thermal recovery wells[J].Engineering Mechanics,1998,15(3):51-60.
[254]李子丰,孙虎,苏金柱,等.压裂管柱力学分析理论与应用[J].应用基础与工程科学学报,2012,20(5):846-862.Li Zifeng,Sun Hu,Su Jinzhu,et al.Theory and applications of mechanical analysis of tubing string in fracturing operation[J].Journal of Basic Science and Engineering,2012,20(5):846-862.
[255]Li Jingyuan,Li Zifeng.Mechanical analysis of tubing string in fracturing operation[J].The Open Petroleum Engineering Journal,2013,6(1):12-24.
[256]刘巨保,张学鸿,朱振锐,等.水平井分流压裂管柱设计与力学分析[J].天然气工业,1998,18(2):46-48.Liu Jiubao,Zhang Xuehong,Zhu Zhenrui,et al.Design and mechanical analysis of the fractional flow fracturing string in a horizontal well[J].Natural Gas Industry,1998,18(2):46-48.
[257]练章华,张颖,赵旭,等.水平井多级压裂管柱力学、数学模型的建立与应用[J].天然气工业,2015,35(1):85-91.Lian Zhanghua,Zhang Ying,Zhao Xu,et al.Establishment and application of mechanical and mathematical models for multistage fracturing strings in a horizontal well[J].Natural Gas Industry,2015,35(1):85-91.
[258]Gibbs S G.Predicting the behavior of sucker-rod pumping systems[J].Journal of Petroleum Technology,1963,15(7):769-778.
[259]Gibbs S G,Neely A B.Computer diagnosis of down-hole conditions in sucker rod pumping wells[J].Journal of Petroleum Technology,1966,18(1):91-98.
[260]Gibbs S G.Design and diagnosis of deviated rod-pumped wells[R].SPE22787,1992.
[261]张少南,张玉斌,张跃武.有杆泵抽油装置的计算机诊断技术[J].大庆石油学院学报,1985,9(1):19-32.Zhang Shaonan,Zhang Yubin,Zhang Yuewu.Computer diagnosis technology of sucker rod pumping unit[J].Journal of Daqing Petroleum Institute,1985,9(1):19-32.
[262]陶景明,张少南,李子丰.有杆泵抽油井示功图的预測[J].大庆石油学院学报,1986,10(2):18-31.Tao Jingming,Zhang Shaonan,Li Zifeng.Predicting the dynamometer cards of sucker-rod pump[J].Journal of Daqing Petroleum Institute,1986,10(2):18-31.
[263]张少南,陶景明,李子丰.有杆泵抽油井计算机预测技术[J].石油钻采工艺,1986,6(4):45-50.Zhang Shaonan,Tao Jingming,Li Zifeng.Computerized prediction technique for rod pumping wells[J].Oil Drilling&Production Technology,1986,6(4):45-50.
[264]李子丰,陶景明,张少南.有杆泵抽油系统动态参数预测技术[J].大庆石油学院学报,1987,11(4):32-39.Li Zifeng,Tao Jingming,Zhang Shaonan.A prediction technique for the behavior of sucker-rod pumping systems[J].Journal of Daqing Petroleum Institute,1987,11(4):32-39.
[265]李敬媛,李子丰.抽油机旋转平衡新设想[J].大庆石油学院学报,1988,12(2):21-26.Li Jingyuan,Li Zifeng.A new idea of pumping unit rotational balance[J].Journal of Daqing Petroleum Institute,1988,12(2):21-26.
[266]Feng Ziming,Ding Huanhuan,Jiang Minzheng.New secondary balancing method saves energy for crank-balanced rod-pumping application[J].SPE Production&Operations,2015,30(2):141-145.
[267]Xing Mingming,Dong Shimin.A new simulation model for a beam-pumping system applied in energy saving and resourceconsumption reduction[J].SPE Production&Operations,2015,30(2):130-140.
[268]隋少波.螺杆泵抽油杆柱的摩擦力矩计算[J].石油机械,1988,16(11):37-43.Sui Shaobo.Frictional moment calculation of Screw-pump sucker rods[J].China Petroleum Machinery,1988,16(11):37-43.
[269]高圣平.井下单螺杆抽油泵杆柱受力分析与设计[J].石油机械,1997,25(1):8-10.Gao Shengping.Force analysis and design of rod string on single screw pump system[J].China Petroleum Machinery,1997,25(1):8-10.
[270]李敬元,李子丰,魏继德,等.螺杆泵驱动杆柱力学分析及稳定器布置[J].石油机械,1998,26(1):13-17.Li Jingyuan,Li Zifeng,Wei Jide,et al.Force analysis of rod string on screw pump system and allocation of stabilizers[J].China Petroleum Machinery,1998,26(1):13-17.
[271]吴晓东,陈德春,薛建泉,等.地面驱动螺杆泵井节点系统优化设计技术[J].石油大学学报:自然科学版,1999,23(5):49-52.Wu Xiaodong,Chen Dechun,Xue Jianquan,et al.Optimizing design for surface drived progressing cavity pumping wells by using nodal system analysis[J].Journal of the University of Petroleum,China:Edition of Natural Science,1999,23(5):49-52.
[272]董世民,李志刚.螺杆泵采油杆柱扭转振动固有频率的计算方法[J].石油矿场机械,2006,35(3):34-37.Dong Shimin,Li Zhigang.Research on the mechanical model and natural frequencies of torsion vibration of the rod string of screw production systems[J].Oil Field Equipment,2006,35(3):34-37.
[273]范青,练章华,邓玮,等.三高气井管柱损伤研究现状[J].重庆科技学院学报:自然科学版,2010,12(2):63-67.Fan Qing,Lian Zhanghua,Deng Wei,et al.Three high gas wells column injury status research and development[J].Journal of Chongqing University of Science and Technology:Natural Sciences Edition,2010,12(2):63-67.
[274]樊洪海,王宇,张丽萍,等.高压气井完井管柱的流固耦合振动模型及其应用[J].石油学报,2011,32(3):547-550.Fan Honghai,Wang Yu,Zhang Liping,et al.A fluid-solid coupled oscillation model for completion string and its application in high pressure gas well[J].Acta Petrolei Sinica,2011,32(3):547-550.
[275]练章华,林铁军,刘健,等.水平井油管柱射孔振动的有限元分析[J].石油钻采工艺,2006,28(1):56-59.Lian Zhanghua,Lin Tiejun,Liu Jian,et al.Finite-element analysis of tube string vibration on horizontal well[J].Oil Drilling&Production Technology,2006,28(1):56-59.
[276]陈华彬,唐凯,任国辉,等.超深井射孔管柱动态力学分析[J].测井技术,2010,34(5):487-491.Chen Huabin,Tang Kai,Ren Guohui,et al.String dynamic mechanics analysis on ultra-deep perforation[J].Well Logging Technology,2010,34(5):487-491.
[277]伍开松,赵云,柳庆仁,等.高压射孔测试管柱力学行为仿真[J].石油矿场机械,2011,40(5):74-77.Wu Kaisong,Zhao Yun,Liu Qingren,et al.Mechanical behavior simulation of high-pressure perforating testing string[J].Oil Field Equipment,2011,40(5):74-77.
[278]蔡履忠,赵烜,薛世峰,等.射孔作业过程管柱结构动态响应分析[J].石油矿场机械,2015,44(5):26-30.Cai Lüzhong,Zhao Xuan,Xue Shifeng,et al.Dynamic response analysis of string structure during perforating process[J].Oil Field Equipment,2015,44(5):26-30.
[279]练章华,施太和,韩建增.膨胀套管摩擦系数与轴向位移的模拟研究[J].石油机械,2002,30(1):1-3.Lian Zhanghua,Shi Taihe,Han Jianzeng.Computer simulatdion study of friction factor of expandable casing and is axial displacement[J].China Petroleum Machinery,2002,30(1):1-3.
[280]练章华,施太和,杨龙,等.膨胀套管计算机仿真分析[J].天然气工业,2003,23(4):41-43.Lian Zhanghua,Shi Taihe,Yang Long,et al.Computer simulating analysis of expandable casing[J].Natural Gas Industry,2003,23(4):41-43.
[281]李子丰,李敬元,赵平,等.膨胀筛管力学分析[J].石油机械,2003,31(12):6-8.Li Zifeng,Li Jingyuan,Zhao Ping,et al.Mechanical analysis of expandable screen pipe[J].China Petroleum Machinery,2003,31(12):6-8.
[282]Li Zifeng,Yao Dongping,Samuel R.Simplified model for expansion and contraction of slotted tubulars[J].Journal of Petroleum Science and Engineering,2010,72(3/4):244-250.
[283]李华桂,吴竞择.海洋钻井隔水管顶张力分析[J].西南石油学院学报,1994,16(4):84-90.Li Huagui,Wu Jingze.Top tension analysis of offshore drilling riser[J].Journal of Southwest--China Petroleum Institute,1994,16(4):84-90.
[284]贾星兰,方华灿.海洋钻井隔水管的动力响应[J].石油机械,1995,23(8):18-22.Jia Xinglan,Fang Huacan.Dynamic response of riser system in marine drilling[J].China Petroleum Machinery,1995,23(8):18-22.
[285]李华桂.海洋钻井隔水管的动力分析[J].石油学报,1996,17(1):122-127.Li Huagui.Dynamic analysis of offshore drilling riser[J].Acta Petrolei Sinica,1996,17(1):122-127.
[286]陈国明,刘秀全,畅元江,等.深水钻井隔水管与井口技术研究进展[J].中国石油大学学报:自然科学版,2013,37(5):129-139.Chen Guoming,Liu Xiuquan,Chang Yuanjiang,et al.Advances in technology of deepwater drilling riser and wellhead[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(5):129-139.
[287]李子丰,王鹏,赵民,等.深水隔水管横向振动力学分析[J].振动、测试与诊断,2013,33(6):1003-1007.Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deepwater[J].Journal of Vibration,Measurement&Diagnosis,2013,33(6):1003-1007.
[288]Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deep water[J].The Open Petroleum Engineering Journal,2015,8(1):38-44.
[289]李成,丁天怀,陈恳.周期性管结构信道的声传输方法分析[J].振动与冲击,2009,28(2):12-15.Li Cheng,Ding Tianhuai,Chen Ken.Analysis of acoustic transmission method in the periodic cascade Channel with its application to drill pipes[J].Journal of Vibration and Shock,2009,28(2):12-15.
[290]李成,丁天怀,陈恳.底部钻柱近钻头动态力测量及声传输方法[J].机械工程学报,2009,45(12):257-262.Li Cheng,Ding Tianhuai,Chen Ken.Acoustic transmission and measurement method for near-bit dynamic force signal of bottom drill string[J].Journal of Mechanical Engineering,2009,45(12):257-262.
[291]李成,井中武,樊尚春,等.钻柱内声传输特性的信道建模与分析[J].振动、测试与诊断,2013,33(3):405-409.Li Cheng,Jing Zhongwu,Fan Shangchun,et al.Modeling and analysis of acoustic transmission characteristics in drillstring[J].Journal of Vibration,Measurement&Diagnosis,2013,33(3):405-409.
[292]李成,井中武,刘钊,等.钻柱信道内隔声体结构建模与仿真分析[J].振动与冲击,2013,32(22):53-56.Li Cheng,Jing Zhongwu,Liu Zhao,et al.Modeling and simulation analysis for an acoustic isolation structure in a drillstring channel[J].Journal of Vibration and Shock,2013,32(22):53-56.
[293]李成,刘钊,丁天怀,等.钻柱声传输信号多载波调制激励分析[J].振动与冲击,2014,33(3):1-4.Li Cheng,Liu Zhao,Ding Tianhuai,et al.Multi-carrier modulation excitation analysis for acoustic transmission signal in a drillstring[J].Journal of Vibration and Shock,2014,33(3):1-4.
[294]李成,刘钊,樊尚春,等.钻柱信道中声信号传输的接收特性分析[J].振动、测试与诊断,2014,34(4):744-748.Li Cheng,Liu Zhao,Fan Shangchun,et al.Channel receiving characteristics for transmitted acoustic signal in a drill string[J].Journal of Vibration,Measurement&Diagnosis,2014,34(4):744-748.
[295]赵国山,管志川,王以法,等.钻柱结构声传输特性试验研究[J].石油矿场机械,2009,38(11):45-49.Zhao Guoshan,Guan Zhichuan,Wang Yifa,et al.Acoustical properties experimental study within drill strings[J].Oil Field Equipment,2009,38(11):45-49.
[296]赵国山,管志川,刘永旺.声波在钻柱中的传播特性[J].中国石油大学学报:自然科学版,2010,34(1):55-59.Zhao Guoshan,Guan Zhichuan,Liu Yongwang.Acoustic transmission properties in drill string[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(1):55-59.
[297]管志川,刘永旺,赵国山,等.钻柱结构对声传输特性的影响[J].石油学报,2012,33(4):687-691.Guan Zhichuan,Liu Yongwang,Zhao Guoshan,et al.Influence of the drill-string structure diversity on acoustic transmission characteristics[J].Acta Petrolei Sinica,2012,33(4):687-691.
[298]刘永旺,管志川,隆志强,等.钻柱中声传播的影响因素[J].中国石油大学学报:自然科学版,2012,36(5):89-95.Liu Yongwang,Guan Zhichuan,Long Zhiqiang,et al.Influence factors of acoustic transmission in drill strings[J].Journal of China University of Petroleum:Edition of Natural Science,2012,36(5):89-95.
[299]刘瑞文,管志川,李春山.钻柱振动信号在线监测及应用[J].振动与冲击,2013,32(1):60-64.Liu Ruiwen,Guan Zhichuan,Li Chunshan.Drilling string vibration online monitoring and its application[J].Journal of Vibration and Shock,2013,32(1):60-64.
[300]刘永旺,管志川,都振川,等.周期性螺纹连接管结构中声波的频谱特性测试[J].中国石油大学学报:自然科学版,2015,39(2):58-62.Liu Yongwang,Guan Zhichuan,Du Zhenchuan,et al.Spectrum characteristics testing of acoustic propagation in drill-string with periodic thread connections[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(2):58-62.
[301]赵国山,管志川,都振川,等.井下钻柱信道的声传播特性[J].石油学报,2013,34(1):151-156.Zhao Guoshan,Guan Zhichuan,Du Zhenchuan,et al.Acoustical propagation characteristics of the communication channel of downhole drill string[J].Acta Petrolei Sinica,2013,34(1):151-156.
[302]刘永旺,管志川,赵国山,等.尺寸差异钻杆组成的钻柱中声传播特性测试[J].振动与冲击,2015,34(7):93-97.Liu Yongwang,Guan Zhichuan,Zhao Guoshan,et al.Tests for acoustic propagation characteristics in drill string composed of size-difference drill pipes[J].Journal of Vibration and Shock,2015,34(7):93-97.
[303]高智海,杨勇,赵克枫.套管磨损的研究进展[J].西安石油学院学报:自然科学版,1999,14(2):41-45.Gao Zhihai,Yang Yong,Zhao Kefeng.Development in the research of casing wear[J].Journal of Xi'an Petroleum Institute:Edition of Natural Science,1999,14(2):41-45.
[304]陈浩,刘承杰.大位移井套管柱磨损的探讨[J].石油矿场机械,2002,31(1):7-9.Chen Hao,Liu Chengjie.A discussion on the casing wear in extended reach well[J].Oil Field Equipment,2002,31(1):7-9.
[305]余磊,樊建春,张来斌,等.深井、超深井套管磨损机理及预测技术研究[J].润滑与密封,2004(5):87-90.Yu Lei,Fan Jianchun,Zhang Laibin,et al.Recent advances in the research of casing wear mechanism and predicting methods in deep&ultra-deep well drilling engineering[J].Lubrication Engineering,2004(5):87-90.
[306]林元华,付建红,施太和,等.套管磨损机理及其防磨措施研究[J].天然气工业,2004,24(7):58-61.Lin Yuanhua,Fu Jianhong,Shi Taihe,et al.Research on casing wear mechanism and antiwear measures[J].Natural Gas Industry,2004,24(7):58-61.
[307]王卫华,储胜利,樊建春.深井和超深井套管磨损研究现状及发展趋势[J].石油机械,2005,33(12):58-61.Wang Weihua,Chu Shengli,Fan Jianchun.The research status and development trend of casing wear in deep and ultra-deep wells[J].China Petroleum Machinery,2005,33(12):58-61.
[308]于会媛,张来斌,樊建春,等.深井、超深井套管磨损监测方法研究及应用[J].润滑与密封,2006(11):12-16.Yu Huiyuan,Zhang Laibin,Fan Jianchun,et al.The research and application of monitor method of casing wear in deep&ultral deep well[J].Lubrication Engineering,2006(11):12-16.
[309]梁尔国,李子丰,王长进,等.深井和大位移井套管磨损程度预测[J].石油钻探技术,2013,41(2):65-69.Liang Erguo,Li Zifeng,Wang Changjin,et al.Casing abrasion prediction for deep and extended reach wells[J].Petroleum Drilling Techniques,2013,41(2):65-69.
[310]梁尔国,李子丰,王金敏,等.油气井套管磨损规律试验研究[J].石油钻探技术,2015,43(1):69-74.Liang Erguo,Li Zifeng,Wang Jinmin,et al.Experimental study on casing wear mechanism in oil and gas wells[J].Petroleum Drilling Techniques,2015,43(1):69-74.
[311]黄毓林,戴祖福.套管腐蚀的预防及治理工艺技术[J].石油钻采工艺,1995,17(2):76-80.Huang Yulin,Dai Zufu.Prevention and control technology of casing corrosion[J].Oil Drilling&Production Technology,1995,17(2):76-80.
[312]毛克伟,史茂成.油气井套管腐蚀原因与防腐措施[J].石油钻探技术,1996,24(1):31-36.Mao Kewei,Shi Maocheng.Cause and prevention of casing corrosion in oilwells[J].Petroleum Drilling Techniques,1996,24(1):31-36.
[313]祝效华,刘少胡,童华.气体钻井钻杆冲蚀规律研究[J].石油学报,2010,31(6):1013-1017.Zhu Xiaohua,Liu Shaohu,Tong Hua.A study on the drill pipe erosion law in gas drilling[J].Acta Petrolei Sinica,2010,31(6):1013-1017.
[314]林铁军,练章华,陈世春,等.气体钻井中气体携岩对钻杆的冲蚀机理研究[J].石油钻采工艺,2010,32(4):1-4.Lin Tiejun,Lian Zhanghua,Chen Shichun,et al.Study on drill pipe erosion of gas carrying cuttings in gas drilling[J].Oil Drilling&Production Technology,2010,32(4):1-4.
[315]姚建林,狄勤丰,王文昌,等.空气水平井中钻柱冲蚀模型与分析[J].钻采工艺,2010,33(5):15-17.Yao Jianlin,Di Qinfeng,Wang Wenchang,et al.Erosion analysis of cuttings in air drilling for horizontal well[J].Drilling&Production Technology,2010,33(5):15-17.
[316]李东洋,王垒超,张涛,等.气体钻井中钻柱力学性能及冲蚀实验研究[J].西南石油大学学报:自然科学版,2012,34(4):158-164.Li Dongyang,Wang Leichao,Zhang Tao,et al.Experimental research on mechanical properties and erosion of the drill string in gas drilling[J].Journal of Southwest Petroleum University:Science&Technology Edition,2012,34(4):158-164.
[317]祝效华,刘少胡,陈绍安,等.气体钻井用钻杆磨损后剩余强度分析[J].石油机械,2011,39(3):25-27.Zhu Xiaohua,Liu Shaohu,Chen Shao’an,et al.An analysis of the residual strength of the drill pipe for gas drilling after abrasion[J].China Petroleum Machinery,2011,39(3):25-27.
[318]袁光杰,姚振强,林元华,等.套管钻井中套管疲劳失效问题的研究[J].天然气工业,2003,23(5):56-58.Yuan Guangjie,Yao Zhenqiang,Lin Yuanhua,et al.Research on fatigue failures of casing in casing drilling[J].Natural Gas Industry,2003,23(5):56-58.
[319]闫相祯,邓卫东,高进伟,等.套管钻井中套管柱疲劳可靠性及相关力学特性研究[J].石油学报,2009,30(5):769-773.Yan Xiangzhen,Deng Weidong,Gao Jinwei,et al.Analysis on mechanics and fatigue reliability of casing string during casing drilling[J].Acta Petrolei Sinica,2009,30(5):769-773.
[320]崔旭明,何富君,谭云,等.油管的疲劳强度分析[J].应用力学学报,2003,20(1):128-132.Cui Xuming,He Fujun,Tan Yun,et al.Analysis of oil tube fatigue fracture[J].Chinese Journal of Applied Mechanics,2003,20(1):128-132.
[321]李子丰,李雪娇,王鹏.预弯曲连续油管及其疲劳寿命预测[J].石油学报,2012,33(4):706-710.Li Zifeng,Li Xuejiao,Wang Peng.Pre-bending coiled tubing and its fatigue life prediction[J].Acta Petrolei Sinica,2012,33(4):706-710.
[322]Li Zifeng,Li Xuejiao,Wang Peng.Prebending coiled tubing and its fatigue life prediction[J].Journal of Energy Resources Technology,2012,134(3):034502.
[323]李子丰,赵文彬,陈礼强.杆管柱力学在医学中的应用前景[J].生物医学工程学杂志,2011,28(4):851-854.Li Zifeng,Zhao Wenbin,Cheng Liqiang.A review on applications of tubular mechanics in medicine[J].Journal of Biomedical Engineering,2011,28(4):851-854.
[324]李子丰,胡志兴,周兴美.油气井杆管柱力学在微米/纳米系统中的应用前景[J].中国西部科技,2010,9(9):16-19.Li Zifeng,Hu Zhixing,Zhou Xingmei.Application possibilities of tubular mechanics in oil-gas wells in micro/nano systems[J].Science and Technology of West China,2010,9(9):16-19.