新型渐开线齿轮范成仪的设计研究

详细信息    查看全文 | 推荐本文 |

	英文篇名：Design and Research of New Type of Involute Gear Forming Machine 作者：宁卫木 英文作者：NING Wei-mu;CNNC Huayu Engineering Co.,Ltd.; 关键词：渐开线 ; 齿轮范成仪 ; 齿坯 ; 齿条刀具 英文关键词：involute;;gear forming machine;;gear billet;;rack cutter 中文刊名：JZGC 英文刊名：Value Engineering 机构：中核华誉工程有限责任公司; 出版日期：2015-09-28 出版单位：价值工程 年：2015 期：v.34;No.395 语种：中文; 页：JZGC201527063 页数：2 CN：27 ISSN：13-1085/N 分类号：158-159

摘要

齿轮范成仪在工程和日常教学中的应用较为广泛,它是利用一对齿轮互相啮合时其共轭齿廓互为包络线的原理来加工轮齿的。本文设计的新型渐开线齿轮范成仪在使用方法和使用效果上都比传统的齿轮范成仪有较大改进,在实际应用中,得到了广大师生的认可。
        Gear forming machine is widely applied in engineering and daily teaching. Its working principle is that when a pair of gears mesh with each other, their conjugate tooth profile is the envelope line of each other. This paper designs a new type of involute gear forming machine, which has large improvement on using method and using effect than the traditional gear forming machine. It has been recognized by the vast number of teachers and students in practice.

引文

[1]叶友东,张勇,乔振,李军剑.行星传动式渐开线齿轮范成仪的设计研究[J].机械工程师,2014(9):13-14.
    [2]刘长萍.齿轮作用的实验改进[J].湖北教育:科学课,2015(2):124.
    [3]吕德兰.齿轮范成仪的改进[J].昆明工学院学报,1992,17(4):48-50.