摘要
以660 MW超临界凝汽机组为例,基于单耗率分析理论,构建汽水循环各项设备的单耗率分析数学模型。利用Ebsilon热力系统软件,对3组不同工况的汽轮机高、中、低压缸、空冷凝汽器、各级回热加热器、凝结水泵以及给水泵等设备结构因素附加单耗率计算分析。设备结构因素附加单耗率分布结果表明,高压缸第一级和低压缸末级是汽轮机本体优化设计重点,为设备优化设计提供指导方向。
Based on the theory of unit consumption analysis,taking 660 MW supercritical condensing unit as an example,a mathematical model for unit consumption analysis of various equipments in steam-water cycle was established.The additional unit consumptions of high pressure cylinder,intermediate pressure cylinder,low pressure cylinder,air-cooled condenser,bleeder heaters at all levels,condensate pump and feed pumps under three different cases were calculated and analyzed by using EBSION thermal system software.The unit consumption from structural factors distribution results showed that the first stage of high pressure cylinder and the last stage of low pressure cylinder should be the optimal design focus for the turbine body which provides the guidance for the optimal system design.
引文
[1] 刘鹏.火电厂参与调峰辅助服务策略研究[J].东北电力技术,2018,39(4):34-37.
[2] 于海洋,吕鸣镝,周卫东,等.基于调峰裕度分析的电网风电消纳能力研究[J].东北电力技术,2016,37(7):26-28.
[3] Tapan K,Ray,Amitava Datta,et al .Exergy-based performance analysis for proper O&M decisions in a steam power plant[J].Energy Conversion & Management,2010,51(6):1333-1344.
[4] Chao Zhang,Yan Wang,Chuguang Zheng,et al.Exergy cost analysis of a coal fired power plant based on structural theory of the rmoeconomics[J].Energy Conversion & Management,2006,11(7-8):817-843.
[5] 宋之平.单耗分析的理论和实施[J].中国电机工程学报,1992,12(4):17-23.
[6] 王利刚,杨勇平,董长青,等.单耗分析理论的改进与初步应用[J].中国电机工程学报,2012,32(11):16-21.
[7] 赵世飞,戈志华,陈浩,等.增设无再热汽轮机热电联产系统节能研究[J].中国电机工程学报,2016,36(23):6441-6447.
[8] Peifeng Li,Natasa Nord,Ivar St?le Ertesv?g,et al.Integrated multiscale simulation of combined heat and power based district heating system[J].Energy Conversion & Management,2015(106):337-354.