摘要
矿用输送机在煤矿综采作用线的运输过程中起着关键的作用,而传统以经验公式静态的设计过程往往只关注了静态的主要的设计因素而存在改善的空间。为此以优化设计方法为基础,运用Matlab对螺旋体进行优化设计,产品的质量和体积得到减小,从而节约了材料,使得制造成本有一定的降低。
Mine conveyor plays a key role in the transportation process of fully mechanized mining operation in coal mine,but the traditional design process often only focuses on the static main design factors,there is room for improvement. Therefore,based on the optimization design method,the helix was optimized by Matlab. The weight and volume of the product were reduced,which saved materials and reduced the manufacturing cost to a certain extent.
引文
[1]李学伟.带式输送机断带抓捕器的应用现状与技术探讨[J].煤矿机械,2013,34(8):225-226.
[2]徐梓斌,闵剑青. VB/Matlab在机构动力学分析中的应用[J].轻工机械,2005,23(2):55-57.
[3]崔希海,任建棚,邓齐齐,等.矿用螺旋输送机设计参数的选择和确定[J].煤矿机械,2013 34(5):24-25
[4]向冬枝,徐余伟.螺旋输送机设计参数的选择和确定[J].水泥技术,2010(1):29-33.
[5]毛君.刮板输送机动力学行为分析与控制理论研究[D].阜新:辽宁工程技术大学,2006.
[6]薛铜龙,李树平.基于Matlab的刮板输送机优化设计[J].煤矿机械,2006,27(6):926-928.