格里森弧齿锥齿轮的设计与接触分析
|
摘要
基于格里森齿制的弧齿锥齿轮啮合原理进行弧齿锥齿轮设计,运用Gleason弧齿锥齿轮设计软件,对弧齿锥齿轮齿面进行接触分析(Advance TCA),并用典型磨齿的加工方法及三坐标测齿对工业减速机上的弧齿锥齿轮进行加工和检测;为运用格里森齿制的弧齿锥齿轮原理进行生产设计和加工,尤其对复杂速比的弧齿锥齿轮设计和加工,提供了有效的解决方案。
In this article,according to the tooth-meshing principle of Gleason spiral bevel gear as well as by means of the finite-element method and the Gleason design software,the tooth-based contact analysis(Advance TCA) is conducted. The typical grinding is adopted;with the aid of the machining method and the three-coordinate tooth measurement,the spiral bevel gear on the industrial reducer is processed and detected. These render effective solutions for the production,design and processing based on the principle of Gleason spiral bevel gear,especially for the design and processing of spiral bevel gear with the complex gear ratio.
In this article,according to the tooth-meshing principle of Gleason spiral bevel gear as well as by means of the finite-element method and the Gleason design software,the tooth-based contact analysis(Advance TCA) is conducted. The typical grinding is adopted;with the aid of the machining method and the three-coordinate tooth measurement,the spiral bevel gear on the industrial reducer is processed and detected. These render effective solutions for the production,design and processing based on the principle of Gleason spiral bevel gear,especially for the design and processing of spiral bevel gear with the complex gear ratio.
引文
[1]聂少武,邓效忠,李天兴,奥利康准双曲面齿轮的理论齿面推导及仿真[J].机械传动,2009,33(2):20-22,28.
[2]张艳红,吴联银,魏洪钦,等.刀倾型机床调整参数转化为Free-form型机床调整参数的原理[J].机械科学与技术,2000,19(5):782-784.
[3] Wei B W,Ren D F,Fang Z D,et al. Study on kinematics equivalent transformation from traditional machine tools to Free-form ones[J]. Mechanical Science and Technology,2004,23(4):425-428.
[4]曾韬.汽车后桥螺旋锥齿轮制造的发展方向与对策[J].世界制造技术与装备市场,2006(6):79-83.
[5]夏炀志强,秦大同.基于低耗齿轮的大速比行星齿轮传动固有特性及振动分析[J].振动与冲击,2018,37(2):242-248.
[6]魏冰阳,张辉,仝昂鑫,等.少齿数大速比准双曲面齿轮的三维仿真与试验[J].机械传动,2014(10):155-157.
[7]天津齿轮机床研究所.格里森锥齿轮技术资料译文集(第一分册)[M].北京:机械工业出版社,1986.
[8]李特文F L.齿轮几何学与应用理论[M].上海:上海科学, 2008.
[9]曾韬.螺旋锥齿轮的设计与加工[M].哈尔滨:哈尔滨工业大学出版社,1989.
[10]郑昌启.弧齿锥齿轮传和准双曲面齿轮—啮合原理、轮坯设计、加工调整和齿面分析计算原理[M].北京:机械工业出版社,1988.
[11]刘大鹏.弧齿锥齿轮接触分析及参数化研究[D].沈阳:沈阳工业大学,2017.
[2]张艳红,吴联银,魏洪钦,等.刀倾型机床调整参数转化为Free-form型机床调整参数的原理[J].机械科学与技术,2000,19(5):782-784.
[3] Wei B W,Ren D F,Fang Z D,et al. Study on kinematics equivalent transformation from traditional machine tools to Free-form ones[J]. Mechanical Science and Technology,2004,23(4):425-428.
[4]曾韬.汽车后桥螺旋锥齿轮制造的发展方向与对策[J].世界制造技术与装备市场,2006(6):79-83.
[5]夏炀志强,秦大同.基于低耗齿轮的大速比行星齿轮传动固有特性及振动分析[J].振动与冲击,2018,37(2):242-248.
[6]魏冰阳,张辉,仝昂鑫,等.少齿数大速比准双曲面齿轮的三维仿真与试验[J].机械传动,2014(10):155-157.
[7]天津齿轮机床研究所.格里森锥齿轮技术资料译文集(第一分册)[M].北京:机械工业出版社,1986.
[8]李特文F L.齿轮几何学与应用理论[M].上海:上海科学, 2008.
[9]曾韬.螺旋锥齿轮的设计与加工[M].哈尔滨:哈尔滨工业大学出版社,1989.
[10]郑昌启.弧齿锥齿轮传和准双曲面齿轮—啮合原理、轮坯设计、加工调整和齿面分析计算原理[M].北京:机械工业出版社,1988.
[11]刘大鹏.弧齿锥齿轮接触分析及参数化研究[D].沈阳:沈阳工业大学,2017.