轴承在线自动检测控制系统设计
|
摘要
工业视觉在线自动检测设备主要应用于高精度、重复性的工业检测环节中,以其非接触性的优点,广泛应用于轴承检测领域。着重介绍轴承在线自动检测装置中硬件及PLC控制系统的设计与选取。包括图像采集系统、PLC控制系统及工件传送系统、图像采集系统与工件传送系统在PLC控制系统控制下完成对轴承的在线自动检测。经实际测试,该系统能很好完成轴承检测工作,有操作简单、稳定性好、精确度高等优点。
The on-line auto detection equipment of industrial vision are mainly used in high-accuracy and high-repeatability industrial testing link. It is widely used in the field of bearing detection due to the advantages of non-contact. The design of hardware and PLC control system in the online automatic detection device is mainly introduced in this paper,including the image acquisition system,PLC control system and the work piece transfer system. The online automatic detection of bearings is completed by the image acquisition system and the work piece transfer system under control of PLC control system. The testing result indicates that the system can accomplish work piece detection well,and has advantages of simple operation,high stability and high accuracy.
The on-line auto detection equipment of industrial vision are mainly used in high-accuracy and high-repeatability industrial testing link. It is widely used in the field of bearing detection due to the advantages of non-contact. The design of hardware and PLC control system in the online automatic detection device is mainly introduced in this paper,including the image acquisition system,PLC control system and the work piece transfer system. The online automatic detection of bearings is completed by the image acquisition system and the work piece transfer system under control of PLC control system. The testing result indicates that the system can accomplish work piece detection well,and has advantages of simple operation,high stability and high accuracy.
引文
[1]刘胜利.基于工业视觉的轴承尺寸在线检测技术[D].西安:西安工业大学,2014.
[2]李灿灿,黄星德.气动机械手PLC控制部分设计[J].三峡大学学报,2010(4):74-76.
[3]孟雷.可编程序控制器(PLC)选用时的问题与对策[J].内江科技,2007(5):100-101.
[4]杨阳,蒋先刚.基于图像分析的滚动轴承表面缺陷识别技术研究[J].华东交通大学报,2008,25(6):41-46.
[5]陈洁.现代PLC控制技术与发展[J].精密制造与自动化,2004(4):48-49.
[6]朱梅.液压与气压技术[M].西安:西安电子科技大学出版社,2007.
[7]张晓明.基于CCD的小轴径零件全自动测量系统研究[D].西安:西安理工大学,2011.
[8]贾伯年.传感器技术[M].南京:东南大学出版社,2007.
[9]王冬青.可编程控制器及原理[M].北京:人民邮电出版社,2008.
[10]黄伟,胡青龙.机械手PLC控制系统设计[J].机电工程技术,2008(11):91-95.
[2]李灿灿,黄星德.气动机械手PLC控制部分设计[J].三峡大学学报,2010(4):74-76.
[3]孟雷.可编程序控制器(PLC)选用时的问题与对策[J].内江科技,2007(5):100-101.
[4]杨阳,蒋先刚.基于图像分析的滚动轴承表面缺陷识别技术研究[J].华东交通大学报,2008,25(6):41-46.
[5]陈洁.现代PLC控制技术与发展[J].精密制造与自动化,2004(4):48-49.
[6]朱梅.液压与气压技术[M].西安:西安电子科技大学出版社,2007.
[7]张晓明.基于CCD的小轴径零件全自动测量系统研究[D].西安:西安理工大学,2011.
[8]贾伯年.传感器技术[M].南京:东南大学出版社,2007.
[9]王冬青.可编程控制器及原理[M].北京:人民邮电出版社,2008.
[10]黄伟,胡青龙.机械手PLC控制系统设计[J].机电工程技术,2008(11):91-95.