摘要
由于核电厂的特殊性,其发生火灾的危害远比一般火灾更大,特别是在严重事故下,可能相互衍生或转化。核电厂火灾事故的救援也具有难度大、危险性高、可能涉及到核辐射的特点。因此,核电厂火灾应引起足够重视。介绍了核电厂在运行期间发生的几起典型火灾报警系统故障并提出解决方案,阐述的系统性能优化方案已成功实施并取得了预期的效果,提高了核电厂安全设施的水平。
Because of the particularity of nuclear power plant, the fire hazard is much greater than that of general fire, especially in severe accidents, which may be derived or transformed from each other. The rescue of nuclear power plant fire accident is also difficult, dangerous and may involve nuclear radiation. Therefore, nuclear power plant fire should be paid enough attention. This paper introduces several typical fire alarm system faults occurred during the operation of nuclear power plant and puts forward solutions. The system performance optimization scheme described in this paper has been successfully implemented and achieved the desired results, which improves the level of safety facilities of nuclear power plant.
引文
[1]李岩.核电站火灾自动报警系统设计[J].消防技术与产品信息,2012(4).
[2]中华人民共和国建设部.火灾自动报警系统设计规范:GB50116-98[S].1998.
[3]国家核安全局.核电厂防火:HAD102/11[S].1996.
[4]中国核工业总公司四〇四厂.秦山核电站火灾报警系统安装使用说明书[Z].