摘要
为了研究全断面隧道掘进机(tunnel boring machine,TBM)支撑推进系统掘进过程中的振动问题,基于多体系统动力学仿真平台,对TBM掘进过程进行动力学仿真研究,得到TBM支撑推进系统各部件的振动加速度,进行时域和频域分析.对比不同方向的加速度有效值和不同部件的加速度有效值,分析TBM支撑推进系统掘进方向的载荷传递规律.结果表明:TBM支撑推进系统的振动以低频为主,其中主梁二振动频率集中在20~30Hz和46~56Hz.TBM支撑推进系统的振动集中在掘进方向,主梁二掘进方向加速度最大值达到11.80m/s2.部件距离刀盘质心越远,振动加速度有效值越小.掘进方向载荷从刀盘传递到主梁一均值减小了42.7%,变化幅度减小了58.3%.对吉林引松工程的TBM进行了振动测试,测试结果一定程度上验证了仿真结果.
The dynamic simulation of TBM tunneling was conducted based on the multi-body system dynamic simulation platform,in order to analyze the vibration problem of the tunnel boring machine(TBM)supporting-thrusting system during tunneling.The vibration accelerations of TBM supporting-thrusting system were obtained and analyzed in time domain and frequency domain.The acceleration root mean square(RMS)in different directions and the acceleration RMS of different components were compared respectively.The load transferring law of TBM supporting-thrusting system was analyzed.Results show that the vibrations of the TBM supporting-thrusting system are mainly low frequency and the vibration frequency of the second main beam is concentrated in the range of 20-30 Hz and 46-56 Hz.The vibration of TBM supporting-thrusting system is mainly concentrated in tunneling direction and the maximum vibration of the second main beam in tunneling direction reaches to 11.80 m/s2.The further the component is away from the centroid of the cutterhead,the smaller is the vibration acceleration RMS.The average input load of the first main beam is 42.7%less than the cutterhead and the amplitude of the input load decreases by 58.3%.The vibration test on the TBM in Songhuajiang water supply project was conducted.The test result verified the simulation results to a certain extent.
引文
[1]刘统,龚国芳,彭左,等.基于液压变压器的TBM刀盘混合驱动系统[J].浙江大学学报:工学版,2016,50(3):419-427.LIU Tong,GONG Guo-fang,PENG Zuo,et al.Hybrid cuttehead driving system for TBM based on hydraulic transformer[J].Journal of Zhejiang University:Engineering Science,2016,50(3):419-427.
[2]CHO S H,KIM J,WON J,et al.Effects of jack force and construction steps on the change of lining stresses in a TBM tunnel[J].KSCE Journal of Civil Engineering,2017,21(4):1-12.
[3]韩美东,曲传咏,蔡宗熙,等.TBM刀盘掘进过程动态仿真[J].哈尔滨工程大学学报,2015,36(8):1098-1102.HAN Hei-dong,QU Chuan-yong,CAI Zong-xi,et al.Dynamic numerical simulation of tunneling by the TBM cutter head[J].Journal of Harbin Engineering University,2015,36(8):1098-1102.
[4]李献,邹晓阳,徐海,等.硬岩掘进机的动力吸振方案优化研究[J].噪声与振动控制,2015,35(3):189-194.LI Xian,ZOU Xiao-yang,Xu Hai,et al.Optimization of dynamic absorbers of tunnel boring machines[J].Noise and Vibration Control,2015,35(3):189-194.
[5]FESTA D,BROERE W,BOSCH J W.An investigation into the forces acting on a TBM during driving-Mining the TBM logged data[J].Tunnelling and Underground Space Technology,2012,32:143-157.
[6]凌静秀,孙伟,霍军周,等.TBM刀盘系统多自由度耦合固有特性及敏感度[J].东北大学学报:自然科学版,2015,37(4):546-550.LING Jing-xiu,SUN Wei,HUO Jun-zhou,et al.Natural characteristics and sensitivity of TBM cutterhead system with multi-degree-of-freedom coupling[J].Journal of Northeastern University:Nantural Science,2015,37(4):546-550.
[7]SUN W,DING X,WEI J,et al.Hierarchical modeling method and dynamic characteristics of cutter head driving system in tunneling boring machine[J].Tunnelling and Underground Space Technology,2016,52:99-110.
[8]HASSANPOUR J,ROSTAMI J,ZHAO J.A new hard rock TBM performance prediction model for project planning[J].Tunnelling and Underground Space Technology,2011,26(5):595-603.
[9]谢启江,余海东.硬岩掘进机刀盘载荷与撑靴接触界面刚度的耦合关系[J].上海交通大学学报,2015,49(9),1269-1275.XIE Qi-jiang,YU Hai-dong.Coupling ralationship between loads on cutterhead of tunnel boring machine and contact stiffness of gripper shoes and rocks[J].Journal of Shanghai Jiaotong University,2015,49(9),1269-1275.
[10]余海东,郝培,赵勇,等.硬岩掘进装备支撑系统界面接触刚度非线性特性[J].机械工程学报,2014,50(21):54-59.YU Hai-dong,HAO Pei,ZHAO Yong,et al.Nonlinear behavior of normal contact stiffness of tunnel surface and supporting system of tunnel boring machines[J].Journal of Mechanical Engineering,2014,50(21):54-59.
[11]陈於学,王冠兵,杨曙年.圆柱滚子轴承的动态刚度分析[J].轴承,2008,(4):1-5.CHEN Yu-xue,WANG Guan-bing,YANG Shu-nian.Analysis of dynamic stiffness of cylindrical roller bearings[J].Bearing,2008,(4):1-5.
[12]GAO S H,MENG G,LONG X H.Study of milling stability with Hertz contact stiffness of ball bearings[J].Archive of Applied Mechanics,2011,81(8):1141-1151.
[13]王林鸿,吴波,杜润,等.液压缸运动的非线性动态特征[J].机械工程学报,2007,43(12):12-19.WANG Lin-hong,WU Bo,DU Run,et al.Nonlinear dynamic characteristics of moving hydraulic cylinder[J].Journal of Mechanical Engineering,2007,43(12):12-19.
[14]PARK Y,LEE H,PARK K,et al.Practical behavior of advanced non-linear hydraulic servo system model for a mold oscillating mechanism depending on line volume[J].Journal of Mechanical Science and Technology,2016,30(3):975-982.
[15]彭欢,张怀亮,邹伟,等.硬岩掘进机推进液压缸结构参数优化[J].机械工程学报,2014,50(21):76-83.PENG Huan,ZHANG Huai-liang,ZOU Wei,et al.Structure parameters optimization of thrust hydraulic cylinder under foundation vibration[J].Journal of Mechanical Engineering,2014,50(21):76-83.