子午线轮胎成型机胎侧自动纠偏装置设计
|
摘要
设计了一种子午线轮胎成型机上使用的新型胎侧自动纠偏装置。该装置主要由直线步进电动机、线光源传感器和纠偏辊组成,采用可编程逻辑控制器(PLC)的比例、积分、微分(PID)控制,减小胎侧在上料过程中的跑偏量,确保胎侧在复合前的位置精度,提高轮胎的均匀性和动平衡性。
A new type of automatic centering device for the sidewall of the radial tire building machine was designed. It mainly consisted of linear actuator stepper motor,line light sensor and centering roller. By using Proportional-Integral-Derivative(PID)control of Programmable Logic Controller(PLC),the device could reduce the deviation of the sidewall in the feeding process,ensure the position accuracy of sidewall for pre-assembly,and improve the uniformity and dynamic balance of the tire.
A new type of automatic centering device for the sidewall of the radial tire building machine was designed. It mainly consisted of linear actuator stepper motor,line light sensor and centering roller. By using Proportional-Integral-Derivative(PID)control of Programmable Logic Controller(PLC),the device could reduce the deviation of the sidewall in the feeding process,ensure the position accuracy of sidewall for pre-assembly,and improve the uniformity and dynamic balance of the tire.
引文
[1]俞淇.子午线轮胎结构设计与制造技术[M].北京:化学工业出版社,2006:314-338.
[2]翁国文.轮胎加工技术[M].北京:化学工业出版社,2005:10-55.
[3]谭剑,杭柏林.轮胎成型机机械和半成品部件定位精度对轮胎均匀性的影响[J].橡胶工业,2018,65(9):1061-1065.
[4]张强,吴红星,谢宗武.基于单片机的电动机控制技术[M].北京:中国电力出版社,2008:1-16.
[5]杨世凤,刘帆,樊祺.轮胎成型机实时监控系统的研究[J].橡胶工业,2014,61(1):40-44.
[2]翁国文.轮胎加工技术[M].北京:化学工业出版社,2005:10-55.
[3]谭剑,杭柏林.轮胎成型机机械和半成品部件定位精度对轮胎均匀性的影响[J].橡胶工业,2018,65(9):1061-1065.
[4]张强,吴红星,谢宗武.基于单片机的电动机控制技术[M].北京:中国电力出版社,2008:1-16.
[5]杨世凤,刘帆,樊祺.轮胎成型机实时监控系统的研究[J].橡胶工业,2014,61(1):40-44.