XGB型旋涡气泵异常发热分析及解决方案
|
摘要
对XGB型旋涡气泵异常发热问题进行研究,利用热成像技术和红外测温技术对发生故障的旋涡气泵的运行状态进行数据监测,综合采集数据进行故障分析,提出故障泵的可行性解决方案,并取得了一定的效果。
In this paper,the abnormal getting hot problem of XGB type vortex gas pump was studied,the operation state of vortex gas pump was monitored by thermal imaging and infrared temperature measurement,and the fault analysis was implemented by collecting the data.
In this paper,the abnormal getting hot problem of XGB type vortex gas pump was studied,the operation state of vortex gas pump was monitored by thermal imaging and infrared temperature measurement,and the fault analysis was implemented by collecting the data.
引文
[1]China National Standardization Management Committee.JB/T 5425-2013 Printing machinery vacuum pressure composite air pump[S].Beijing:China Quality Press,2014.中国国家标准化管理委员会.JB/T 5425-2013印刷机械真空压力复合气泵[S].北京:中国质检出版社,2014.
[2]Chen Juan.Common heating faults and processing methods of threephase asynchronous motors[J].Journal of anhui electronic information technology institute,2003,2(4):69.陈娟.三相异步电动机常见发热故障及处理方法[J].安徽电子信息职业技术学院学报,2003,2(4):69.
[3]Li zhuoyan,Zhou qiangqiang,Li Zhixiong.Research on fault diagnosis technology of rolling bearing[J].Technical information,2008,(36):6.李卓彦,周强强,李志雄.滚动轴承故障诊断技术的研究[J].科技信息,2008,(36):6.
[4]Zhang Junsheng.Reasons and Countermeasures for High Temperature of Vacuum Pump Motor[J].Power Safety Technology,2005,7(7):45.张军生.真空泵电机温度高的原因及对策[J].电力安全技术,2005,7(7):45.
[5]Liu Xiangchen,Wang Junyi.Performance test and analysis of eddy gas pump[J].Chemical Equipment Technology,1991(5):13.刘相臣,王军义.旋涡气泵的性能测试及分析[J].化工装备技术,1991(5):13.
[6]Shapin S,Schaffer S.Leviathan and Air Pump[M].CAI pei-jun.Shanghai:Shanghai People's Publishing House,2008.Shapin S,Schaffer S.利维坦与空气泵[M].蔡佩君,译.上海:上海人民出版社,2008.
[7]TANG Wei,YANG Run-shan,SUN Zhen-ning.Optimization of Ventilation System Parameters Based on Improved Genetic Algorithm[J].China Pulp&Paper,2013,36(10):46.汤伟,杨润珊,孙振宁.基于改进遗传算法的造纸机干燥部排风系统参数优化[J].中国造纸,2017,36(10):46.
[8]DONG Xu,DAI Da-song,ZHAO Wei-gang,et al.Research on the Structure and Properties of Bamboo Fiber Vacuum Insulated Core Material[J].China Pulp&Paper,2013,32(12):48.董旭,戴达松,赵伟刚,等.竹纤维真空绝热板芯材的结构和性能研究[J].中国造纸,2017,32(12):48.
[9]YAN Yan,DONG Ji-xian,TANG Wei,et al.Effects of the Structural Parameters of Multi-channel Dryer on the Heat Transfer Performance of the Dryer[J].Transactions of China Pulp and Paper,2015(3):46.严彦,董继先,汤伟,等.多通道烘缸结构参数对烘缸传热性能的影响[J].中国造纸学报,2015(3):46.
[10]KONG Lin-bo,LIU Huan-bin,LI Ji-geng,et al.Modeling and Simulation of Paper Dryer Based on Technological Process[J].Transactions of China Pulp and Paper,2015(4):45.孔令波,刘焕彬,李继庚,等.基于工艺流程的纸机干燥部建模与模拟[J].中国造纸学报,2015(4):45.
[2]Chen Juan.Common heating faults and processing methods of threephase asynchronous motors[J].Journal of anhui electronic information technology institute,2003,2(4):69.陈娟.三相异步电动机常见发热故障及处理方法[J].安徽电子信息职业技术学院学报,2003,2(4):69.
[3]Li zhuoyan,Zhou qiangqiang,Li Zhixiong.Research on fault diagnosis technology of rolling bearing[J].Technical information,2008,(36):6.李卓彦,周强强,李志雄.滚动轴承故障诊断技术的研究[J].科技信息,2008,(36):6.
[4]Zhang Junsheng.Reasons and Countermeasures for High Temperature of Vacuum Pump Motor[J].Power Safety Technology,2005,7(7):45.张军生.真空泵电机温度高的原因及对策[J].电力安全技术,2005,7(7):45.
[5]Liu Xiangchen,Wang Junyi.Performance test and analysis of eddy gas pump[J].Chemical Equipment Technology,1991(5):13.刘相臣,王军义.旋涡气泵的性能测试及分析[J].化工装备技术,1991(5):13.
[6]Shapin S,Schaffer S.Leviathan and Air Pump[M].CAI pei-jun.Shanghai:Shanghai People's Publishing House,2008.Shapin S,Schaffer S.利维坦与空气泵[M].蔡佩君,译.上海:上海人民出版社,2008.
[7]TANG Wei,YANG Run-shan,SUN Zhen-ning.Optimization of Ventilation System Parameters Based on Improved Genetic Algorithm[J].China Pulp&Paper,2013,36(10):46.汤伟,杨润珊,孙振宁.基于改进遗传算法的造纸机干燥部排风系统参数优化[J].中国造纸,2017,36(10):46.
[8]DONG Xu,DAI Da-song,ZHAO Wei-gang,et al.Research on the Structure and Properties of Bamboo Fiber Vacuum Insulated Core Material[J].China Pulp&Paper,2013,32(12):48.董旭,戴达松,赵伟刚,等.竹纤维真空绝热板芯材的结构和性能研究[J].中国造纸,2017,32(12):48.
[9]YAN Yan,DONG Ji-xian,TANG Wei,et al.Effects of the Structural Parameters of Multi-channel Dryer on the Heat Transfer Performance of the Dryer[J].Transactions of China Pulp and Paper,2015(3):46.严彦,董继先,汤伟,等.多通道烘缸结构参数对烘缸传热性能的影响[J].中国造纸学报,2015(3):46.
[10]KONG Lin-bo,LIU Huan-bin,LI Ji-geng,et al.Modeling and Simulation of Paper Dryer Based on Technological Process[J].Transactions of China Pulp and Paper,2015(4):45.孔令波,刘焕彬,李继庚,等.基于工艺流程的纸机干燥部建模与模拟[J].中国造纸学报,2015(4):45.