微弧氧化膜封孔技术研究进展
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Research Progress of Pore Sealing Technology for Micro-arc Oxidation Films
  • 作者:刘朋 ; 刘群峰 ; 黄德群 ; 顾珩 ; 刘志聃
  • 英文作者:LIU Peng;LIU Qun-feng;HUANG De-qun;GU Heng;LIU Zhi-dan;National Engineering Research Center for Healthcare Devices;Guangdong Key Lab of Medical Electronic Instruments and Polymer Material Products;Guangdong Institute of Medical Instruments;
  • 关键词:阀金属 ; 等离子体电解氧化 ; 微孔封闭 ; 表面处理 ; 耐蚀性
  • 英文关键词:valve metals;;plasma electrolytic oxidation;;micro-pore sealing;;surface treatment;;corrosion resistance
  • 中文刊名:BMJS
  • 英文刊名:Surface Technology
  • 机构:国家医疗保健器具工程技术研究中心;广东省医用电子仪器及高分子材料制品重点实验室;广东省医疗器械研究所;
  • 出版日期:2019-07-20
  • 出版单位:表面技术
  • 年:2019
  • 期:v.48
  • 基金:广东省科技计划项目(2017A050506038,2017A070702010);; 广东省科学院院属骨干科研机构创新能力建设专项项目(2017GDASCX-0103,2018GDASCX-0103);; 广州市科技计划项目(201704030067)~~
  • 语种:中文;
  • 页:BMJS201907008
  • 页数:11
  • CN:07
  • ISSN:50-1083/TG
  • 分类号:75-85
摘要
首先对微弧氧化中微孔产生机理进行了阐释,归纳并总结了微弧氧化封孔技术的最新研究进展。在不同封孔机理的基础上,分析了各种封孔方法的优缺点,如水合封孔、有机物封孔、无机物封孔和一些新型封孔工艺。其中自封孔展现出了较大优势,其包括溶液自封孔和外加电场自封孔两种方式。溶液自封孔是通过改变电解液的组成及配方实现自封孔,而外加电场自封孔主要是利用外加电场驱使带电粒子加速向微孔中移动并生成沉淀,使封闭微孔。最后对封孔工艺的发展趋势进行了展望。
        The work explained the formation mechanism of micro-pores in MAO processing and summarized the latest research progress of pore sealing technology. On the basis of different sealing mechanisms, the advantages and disadvantages of various sealing methods were analyzed, such as hydration sealing, organic sealing, inorganic sealing and some new sealing techniques. The self-sealing showed great advantages, including self-sealing based on solutions and self-sealing based on external electric field. The self-sealing technology based on solutions was achieved by optimizing the composition and formula of electrolyte, and the other self-sealing based on the external electric field drove the charged particles moving toward micro-pores to form precipitate and to seal the pores. In addition, the development trend of the sealing technology is prospected.
引文
[1]LI L H,KONG Y M,KIM H W,et al.Improved biological performance of Ti implants due to surface modification by micro-arc oxidation[J].Biomaterials,2004,25(14):2867-2875.
    [2]GUO H F,AN M Z,HUO H B,et al.Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions[J].Applied surface science,2006,252(22):7911-7916.
    [3]ZHAO L,CUI C,WANG Q,et al.Growth characteristics and corrosion resistance of micro-arc oxidation coating on pure magnesium for biomedical applications[J].Corrosion science,2010,52(7):2228-2234.
    [4]TIAN J,LUO Z,SHANDKUI Q I,et al.Structure and anti-wear behavior of micro-arc oxidized coatings on aluminum alloy[J].Surface&coatings technology,2002,154(1):1-7.
    [5]LEE T C,ABDULLAH H Z,KOSHY P,et al.Deposition of novel bioactive nanoflower-like sodium titanate on TiO2,coating via anodic oxidation for biomedical applications[J].Materials letters,2018,216:256-260.
    [6]ANTONOPOULOS I A,KARANTONIS A.Electrochemistry of copper in methanolic solutions:Anodic oxidation and fabrication of hydrophobic surfaces[J].Electrochimica acta,2017,240:195-202.
    [7]王平,伍婷,肖佑涛,等.Al2O3微粉添加量对镁合金微弧氧化膜特性影响[J].稀有金属材料与工程,2017,46(5):1260-1264.WANG Ping,WU Ting,XIAO You-tao,et al.Effects of Al2O3 micro powder addition amount on characteristics of micro-arc oxidation coating formed on magnesium alloy[J].Rare metal materials and engineering,2017,46(5):1260-1264.
    [8]李宏战,李争显,杜继红,等.氧化时间对ZL205A铝合金微弧氧化膜层的影响[J].稀有金属材料与工程,2016,45(10):2741-2745.LI Hong-zhan,LI Zheng-xian,DU Ji-hong,et al.Effect of oxidation time on micro-arc oxidation coating of ZL205Aaluminum alloy[J].Rare metal materials and engineering,2016,45(10):2741-2745.
    [9]SONG Z,XIE Z,YU G,et al.A novel palladium-free surface activation process for electroless nickel deposition on micro-arc oxidation film of AZ91D Mg alloy[J].Journal of alloys&compounds,2015,623:274-281.
    [10]SHAO L,LI H,JIANG B,et al.A comparative study of corrosion behavior of hard anodized and micro-arc oxidation coatings on 7050 aluminum alloy[J].Metals,2018,8(3):165-174.
    [11]贾昭君,李明,刘倩,等.新型可降解Mg-1Ca合金微弧氧化工艺初探[J].稀有金属材料与工程,2014,43(s1):270-275.JIA Zhao-jun,LI Ming,LIU Qian,et al.Fabrication and characterization of micro-arc oxidation(MAO)coatings on novel biodegradable Mg-1Ca alloy for orthopaedic application[J].Rare metal materials and engineering,2014,43(s1):270-275.
    [12]HUSSEIN R O,NORTHWOOD D O,NIE X.Processing-microstructure relationships in the plasma electrolytic oxidation(PEO)coating of a magnesium alloy[J].Materials sciences&applications,2014,5(3):124-139.
    [13]张鹏飞,闫淑芳,陈伟东,等.正向电压对氢化锆微弧氧化阻氢膜层性能的影响[J].无机材料学报,2018,33(7):793-797.ZHANG Peng-fei,YAN Shu-fang,CHEN Wei-dong,et al.Anode voltage on hydrogen permeation barrier performance of zirconium hydride with micro-arc oxidation[J].Journal of inorganic materials,2018,33(7):793-797.
    [14]董凯辉,孙硕,宋影伟,等.镁合金新型氟钛酸盐电解液体系微弧氧化电参数的优化[J].中国有色金属学报,2014,24(9):2220-2227.DONG Kai-hui,SUN Shuo,SONG Ying-wei,et al.Optimization of electrical parameters of micro-arc oxidation using novel fluotitanate electrolyte on Mg alloys[J].The Chinese journal of nonferrous metals,2014,24(9):2220-2227.
    [15]AYDOGAN D T,MUHAFFEL F,KILIC M M,et al.Optimisation of micro-arc oxidation electrolyte for fabrication of antibacterial coating on titanium[J].Materials technology,2017,33(10):1-8.
    [16]LU X,FENG X,ZUO Y,et al.Evaluation of the micro-arc oxidation treatment effect on the protective performance of a Mg-rich epoxy coating on AZ91D magnesium alloy[J].Surface and coatings technology,2015,270:227-235.
    [17]翟彦博,陈红兵,梅镇.封孔方式对AZ31B镁合金微弧氧化膜耐腐蚀性的影响[J].西南大学学报(自然科学版),2014,36(4):173-179.ZHAI Yan-bo,CHEN Hong-bing,MEI Zhen.Effect of sealing treatment on corrosion resistance of micro-arc oxidation coatings for AZ31B Mg alloy[J].Journal of Southwest University(Natural science),2014,36(4):173-179.
    [18]陈宏,黄杰,陈永楠,等.AZ91D镁合金外加电场下自封孔微弧氧化膜层微观形貌及耐蚀性[J].稀有金属材料与工程,2017,46(10):3098-3104.CHEN Hong,HUANG Jie,CHEN Yong-nan,et al.The research on microstructure and corrosion resistance of applied electricity with self-sealing and micro-arc oxidation coatings of AZ91D magnesium alloys[J].Rare metal materials and engineering,2017,46(10):3098-3104.
    [19]HUNG J C,KU C Y,FAN Z W.Fabrication of an electrode insulated by using hot dip aluminizing and micro-arc oxidation method for electrochemical microhole machining[J].Procedia CIRP,2018,68:438-443.
    [20]ZOU B,LüG H,ZHANG G L,et al.Effect of current frequency on properties of coating formed by micro-arc oxidation on AZ91D magnesium alloy[J].Transactions of nonferrous metals society of China,2015,25(5):1500-1505.
    [21]张荣发,王方圆,胡长员,等.镁合金阳极氧化膜封孔处理的研究进展[J].材料工程,2007(11):82-86.ZHANG Rong-fa,WANG Fang-yuan,HU Chang-yuan,et al.Research progress in sealing treatment of anodic coatings formed on magnesium alloys[J].Journal of materials engineering,2007(11):82-86.
    [22]ZHANG J,JIA Q,YAN S,et al.Microstructure and properties of hydratable alumina bonded bauxite-andalusite based castables[J].Ceramics international,2016,42(1):310-316.
    [23]PING W,LIU D X,LI J P,et al.Growth process and corrosion resistance of micro-arc oxidation coating on Mg-Zn-Gd magnesium alloys[J].Transactions of nonferrous metals society of China,2010,20(11):2198-2203.
    [24]TAKEBAYASHI K,SHIOMI H,NAKA S,et al.Utility of a microwave surgical instrument in sealing lymphatic vessels[J].American journal of surgery,2013,206(2):229-229-233.
    [25]DUNG N T,UNLUER C.Sequestration of CO2,in reactive MgO cement-based mixes with enhanced hydration mechanisms[J].Construction&building materials,2017,143:71-82.
    [26]李乐,陈汪林,蔡飞,等.磷酸铝铬封孔处理对热喷涂WC-12Co涂层耐蚀性的影响[J].中国表面工程,2017,30(4):56-63.LI Le,CHEN Wang-lin,CAI Fei,et al.Effects of chromium-aluminum-phosphate sealing treatments on corrosion resistance of thermal sprayed WC-12Co coatings[J].China surface engineering,2017,30(4):56-63.
    [27]马颖,刘楠,王宇顺,等.铬酸盐对镁合金微弧氧化膜耐蚀性的影响[J].硅酸盐学报,2011,39(9):1493-1497.MA Ying,LIU Nan,WANG Yu-shun,et al.Effect of chromate additive on corrosion resistance of MAO coatings on magnesium alloys[J].Journal of the Chinese ceramic society,2011,39(9):1493-1497.
    [28]阎瑞,马世宁,吴行.耐高温涂层封孔剂的制备研究[J].中国表面工程,2003,16(1):13-15.YAN Rui,MA Shi-ning,WU Hang.Preparation and investigation of sealing reagent used in alloy coating at high temperature[J].China surface engineering,2003,16(1):13-15.
    [29]SNOGAN F,BLANC C,MANKOWSKI G,et al.Characterisation of sealed anodic films on 7050 T74 and 2214T6 aluminium alloys[J].Surface&coatings technology,2002,154(1):94-103.
    [30]LIU H,DU Y,PENG X,et al.Sealing of immersion deuterium dioxide and its application to signal maintenance for ex-vivo and in-vivo multiphoton microscopy excited at the 1700-nm window[J].IEEE photonics journal,2017,9(5):1-8.
    [31]GE Y,JIANG B,LIU M,et al.Preparation and characterization of the micro-arc oxidation composite coatings on magnesium alloys[J].Journal of magnesium&alloys,2014,2(4):309-316.
    [32]HU H,ZHOU H,CAO Z,et al.Tribological properties of duplex MAO/bonded PTFE coating on top of Ti alloy in vacuμm[J].Tribology,2017,37(3):318-324.
    [33]XI J J,ZHAO J.Influence of organic sealed on the corrosion behaviors of micro arc oxidation coated ZM5 magnesium alloy[J].Advanced materials research,2011,418-420:844-847.
    [34]李思思,王维,吴玉锋,等.镁合金表面微弧氧化-溶胶凝胶复合膜层的结构及其耐蚀性[J].中国表面工程,2013,26(3):40-44.LI Si-si,WANG Wei,WU Yu-feng,et al.Structure and corrosion resistance of composite coating prepared by micro-arc oxidation and sol-gel methods on the surface of magnesium alloy[J].China surface engineering,2013,26(3):40-44
    [35]SHI P,NG W F,WONG M H,et al.Improvement of corrosion resistance of pure magnesium in Hanks?solution by microarc oxidation with sol-gel TiO2 sealing[J].Journal of alloys&compounds,2009,469(1):286-292.
    [36]SUN W W,LI M Q,GAO Y,et al.Double sealing of ultrasonic micro-arc oxidation coating on pure magnesium by nano-SiO2 particles and SiO2 sol sealing agent[J].Advanced materials research,2014,1030-1032:48-51.
    [37]韩林原,陈尧,李旋,等.PLLA封孔工艺对微弧氧化镁合金丝材性能的影响[J].表面技术,2017,46(3):1-8.HAN Lin-yuan,CHEN Yao,LI Xuan,et al.Effects of PLLA sealing technology on performance of micro-arc oxidized magnesium alloys[J].Surface technology,201746(3):1-8.
    [38]WANG Y Q,DENG Y Z,SHAO Y W,et al.New sealing treatment of microarc oxidation coating[J].Surface engineering,2014,30(1):31-35.
    [39]ALABBASI A,MEHJABEEN A,YE Q,et al.Biodegradable polymer for sealing porous PEO layer on pure magnesium:An in vitro degradation study[J].Applied surface science,2014,301(2):463-467.
    [40]MOHEDANO M,BLAWERT C,ZHELUDKEVICH ML.Cerium-based sealing of PEO coated AM50 magnesium alloy[J].Surface&coatings technology,2015269(1):145-154.
    [41]LALEH M,KARGAR F,ROUHAGHDAM S A.Investigation of rare earth sealing of porous micro-arc oxidation coating formed on AZ91D magnesium alloy[J].Journal of rare earths,2012,30(12):1293-1297.
    [42]叶作彦,刘道新,李重阳,等.封闭对铝合金微弧氧化膜在酸性溶液中耐蚀性的影响[J].无机材料学报,2015,30(6):627-632.YE Zuo-yan,LIU Dao-xin,LI Chong-yang,et al.Effect of sealing treatments on the corrosion behavior of micro-arc oxidation coating on aluminum alloy in acid NaCl solution[J].Journal of inorganic materials,2015,30(6):627-632.
    [43]LEE J H,KIM S J.Enhancement of wettability by wet surface modification and application of rare-earth element in sealing of ceramic oxide thin film on Al alloy[J].Journal of nanoscience&nanotechnology,2016,16:11797-11801.
    [44]ZHANG G,WU L,TANG A,et al.Active corrosion protection by a smart coating based on a MgAl-layered double hydroxide on a cerium-modified plasma electrolytic oxidation coating on Mg alloy AZ31[J].Corrosion science,2018,139:370-382.
    [45]WANG W,WAN P,LIU C,et al.Degradation and biological properties of Ca-P contained micro-arc oxidation self-sealing coating on pure magnesium for bone fixation[J].Regenerative biomaterials,2015,2(2):107-118.
    [46]SONG Y,DONG K,SHAN D,et al.Investigation of a novel self-sealing pore micro-arc oxidation film on AM60magnesium alloy[J].Journal of magnesium&alloys2013,1(1):82-87.
    [47]GAN J,TAN L,YANG K,et al.Bioactive Ca-P coating with self-sealing structure on pure magnesium[J].Journal of materials science materials in medicine,2013,24(4):889-901.
    [48]CUI X J,LIU C H,YANG R S,et al.Self-sealing micro-arc oxidation coating on AZ91D Mg alloy and its formation mechanism[J].Surface&coatings technology,2015,269(1):228-237.
    [49]DONG K,SONG Y,SHAN D,et al.Formation mechanism of a self-sealing pore micro-arc oxidation film on AM60 magnesium alloy[J].Surface and coatings technology,2015,266:188-196.
    [50]陈宏,黄杰,陈永楠,等.二次电压对AZ91D镁合金微弧氧化封孔的影响[J].表面技术,2017,46(5):12-16.CHEN Hong,HUANG Jie,CHEN Yong-nan,et al.Effect of secondary voltage on micro-arc oxidation sealing of AZ91D magnesium alloy[J].Surface technology,2017,46(5):12-16.
    [51]YING X,HU X,SONG R.Characteristics of Ce O2/Zr O2-HA composite coating on ZK60 magnesium alloy[J]Journal of materials research,2017,32(6):1073-1082.
    [52]蒋永锋,杨华山,包晔峰,等.镁合金微弧氧化陶瓷层表面的电泳成膜机理[J].中国有色金属学报,2011,21(7):1562-1569.JIANG Yong-feng,YANG Hua-shan,BAO Ye-feng,et al.Formation mechanism of electrophoretically deposited organic layer on PEO film of magnesium alloy[J].The Chinese journal of nonferrous metals,2011,21(7):1562-1569.
    [53]ZHAO J,XIE X,ZHANG C.Effect of the graphene oxide additive on the corrosion resistance of the plasma electrolytic oxidation coating of the AZ31 magnesium alloy[J].Corrosion science,2016,114:146-155.
    [54]LI S J,LI P P,CAO X M,et al.Study on sealing technology for micro-arc oxidation ceramic coatings of aluminium[J].Advanced materials research,2013,602-604:1591-1595.
    [55]韩晓光,雷明凯,朱小鹏,等.强流脉冲离子束辐照镁合金微弧氧化膜的耐腐蚀性能[J].中国有色金属学报,2012,22(2):337-342.HAN Xiao-guang,LEI Ming-kai,ZHU Xiao-peng,et al.Anti-corrosion properties of micro-arc oxidation films on AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam[J].The Chinese journal of nonferrous metals,2012,22(2):337-342.
    [56]FENG P,WANG D,TIAN Y,et al.Sealing the pores of PEO coating with Mg-Al layered double hydroxide:enhanced corrosion resistance,cytocompatibility and drug delivery ability[J].Scientific reports,2017,7(1):1-12.
    [57]REHMAN Z U,SHIN S H,HUSSAIN I,et al.Structure and corrosion properties of the two-step PEO coatings formed on AZ91D Mg alloy in K2ZrF6-based electrolyte solution[J].Surface&coatings technology,2016,307:484-490.
    [58]DING Z Y,CUI L Y,CHEN X B,et al.Invitro,corrosion of micro-arc oxidation coating on Mg-1Li-1Ca alloyThe influence of intermetallic compound Mg2Ca[J].Journal of alloys&compounds,2018,764:250-260.
    [59]WANG X,ZHU Z,LI Y,et al.Characterization of micro-arc oxidation coatings on 6N01 aluminum alloy under different electrolyte temperature control modes[J].Journal of materials engineering&performance,2018,27(4):1-8.
    [60]CUI X J,PING J,ZHANG Y J,et al.Structure and properties of newly designed MAO/TiN coating on AZ31BMg alloy[J].Surface&coatings technology,2017,328:319-325.
    [61]GUAN X,WANG Y,ZHANG G,et al.Microstructures and properties of Zr/CrN multilayer coatings fabricated by multi-arc ion plating[J].Tribology international,2017,106:78-87.
    [62]CHEN M,CAI F,CHEN W,et al.Influence of vacuum annealing on structures and properties of Al,Ti,Si,Ncoatings with corrosion resistance[J].Surface&coatings technology,2017,312:25-31.
    [63]LU X,FENG X,ZUO Y,et al.Improvement of protection performance of Mg-rich epoxy coating on AZ91D magnesium alloy by DC anodic oxidation[J].Progress in organic coatings,2017,104:188-198.
    [64]EZHILSELVI V,BALARAJU J N,SUBRAMANIAN S.Chromate and HF free pretreatment for MAO/electroless nickel coating on AZ31B magnesium alloy[J].Surface&coatings technology,2017,325:270-276.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700