摘要
利用ICP-MS法测定陶瓷片密封水嘴浸泡液中镉含量,依据JJF 1059. 1—2012《测量不确定度评定与表示》的要求,建立数学模型,对其不确定度来源进行分析计算,计算合成标准不确定度与扩展不确定度。通过分析计算表明:当浸泡液中镉含量为7. 622μg/L、取置信概率为95%时,其相对不确定度为3. 2%;标准曲线的拟合对不确定的影响最大,标准浓液的配置对不确定度的影响最小。
Cadmium in immersion solution of ceramic cartridge faucets was measured by ICP-MS. Established the mathematical model,according to JJF 1059. 1—2012 " Evaluation and Expression of Uncertainty in Measurement". Analyzed and assessed the sources of uncertainty affecting factors,calculated the combined uncertainty and expanded uncertainty. The result showed that: when the Cadmium in immersion solution is 7. 622 μg/L and the confidence probability is 95%,the relative uncertainty is 3. 2%; the greatest affecting factor is the standard curve fitting and the least affecting factor is the preparing of standard solution.
引文
[1]吴建江,程羽君,王芳,等.电感耦合等离子质谱法测定化妆品中Cd含量的不确定度评定[J].广东化工,2018,45(3):169-171.
[2]中华人民共和国国家质量监督检验检疫总局. GB18145—2014陶瓷片密封水嘴[S]. 2014.
[3]中华人民共和国国家质量监督检验检疫总局. JJF1059. 1—2012测量不确定度评定与表示[S]. 2012.
[4]中华人民共和国卫生部. GB/T 5750. 6-2006生活饮用水标准检验方法金属指标[S]. 2006.
[5]樊继鹏,汪洋,魏晓培,等. ICP-MS法测定饮用水中铅砷镉的不确定度评定的研究[J].包装与食品机械,2016,34(3):70-72.
[6]谢翠美,李鸿超,彭家杰. ICP-MS法测定水质中砷的不确定度评定[J].广东化工,2017,44(8):222-223.
[7]薛蕾,林婧,隋志伟,等.大肠杆菌定量检测用标准物质的研制[J].计量学报,2015,36(6):652-656.
[8]王钊,史乃捷,穆克然木·阿布利孜.化肥标准物质中钾含量准确值方法研究[J].计量学报,2018,39(3):425-430.
[9]陈金凤,刘中洁,吴德淮. ICP-OES法测定燃香类产品中Cr元素的不确定评定[J].化工进展,2016,35(2):116-120.
[10]姚雅萱,任玲玲,高思田,等.拉曼光谱仪相对强度标准物质量值表达及不确定度评定[J].计量学报,2017,38(3):376-379.