洁净流体输送系统对隔膜阀选用及安装的要求

详细信息    查看全文 | 推荐本文 |

英文篇名：Requirements for Selection and Installation of Diaphragm Valve Used in Clean Fluid Delivery 作者：吴珲 英文作者：Wu Hui;Shanghai Morimatsu Pharmaceutical Equipment Engineering Co.,Ltd; 关键词：隔膜阀 ; 洁净流体 ; 输送 ; 工艺用水 ; 容器 ; 发酵罐 ; 选型与安装 英文关键词：cleaning fluid;;delivery;;water used in process;;vessel;;ferment vessel;;selection and installation 中文刊名：YGCJ 英文刊名：Chemical and Pharmaceutical Engineering 机构：上海森松制药设备工程有限公司; 出版日期：2016-12-15 出版单位：化工与医药工程 年：2016 期：v.37 语种：中文; 页：YGCJ201606015 页数：5 CN：06 ISSN：31-2101/TQ 分类号：53-57

摘要

隔膜阀由于无死角、便于清洗灭菌、可全排尽等特点被广泛应用于制药及日化行业。然而在工程设计过程中,由于流体介质的理化性质、使用工况及用途的不同常会出现隔膜阀选型有误及错装等问题,使其无法满足流体洁净输送的要求。以几个常用目标用途为例,阐述其在制药及日化行业洁净流体输送系统中的正确应用。
        Diaphragm valve is widely used in pharmaceutical and cosmetic industries in view of its characteristics of without dead corner, easy cleaning and sterilization and good draining with exhaustion. However in engineering design, with different physiochemical features, working conditions and applications of various mediums, the errors in selection and installation of diaphragm valve are often occurred so that the requirements for cleaning fluid delivery cannot be met. In this article, with several examples, the correct use of diaphragm valve in pharmaceutical and cosmetic industries was expounded.

引文

[1]国家食品药品监督管理局.药品生产质量管理规范(2010年修订)[S].2010.
    [2]The American Society of Mechanical Engineers.ASME BPE-2014[Z].2014,SD-3
    [3]顾正辉.ASME BPE标准的介绍和解读.系统设计SD章节简介(1)[J].医药工程设计.2013,34(5).
    [4]黄浩.制药用水储存及分配系统设计[J].医药工程设计.2010,31(1).
    [5]金永保,曹燕秋,周立法.生物发酵工艺系统设计应遵循的几项指导原则[J].机电信息.中国制药设备.2014,8(8).