摘要
针对运载火箭箭体结构铆接舱段的装配,开展单元化制造模式研究。通过对产品结构特点及典型工艺流程的分析完成单元构建及资源配置。考虑到产品对象多品种、小批量的特点,采用成组局部的形式完成了单元布局的优化。经装配车间生产验证,生产效率及产品质量显著提高。
Aiming at the assembly of launch vehicle riveting cabins, the research of cell production mode was focused on. Based on the analysis of product structure and typical process, a method of cell formation is put forward. Considering the characteristics of Multi-Specification & Small-Batch, the method of group technology is applied in the process of cell layout. The method was validated through an application case.
引文
[1]聂清.面向单元制造的多阶段单元构建方法研究[D].杭州电子科技大学,2014:18.
[2]王雪平.面向装配过程的制造资源可视化管理技术研究[D].合肥工业大学,2010:8.
[3]冀阿强,段晓峰.面向云制造的制造资源模型研究[J].企业管理与信息化,2012(9):6.
[4]李志华等.多单元制造系统布局设计[J].工程设计学报,2007(3):195.
[5]杨阔然. X公司机加车间单元布局设计研究[D].吉林大学,2012:25.