压曲机回转台液压传动系统的仿真分析
|
摘要
根据新型压曲机回转台工作特性,设计回转台液压传统系统,并且通过液压原理确定液压传动系统工作参数。在AMESim中搭建相关仿真模型,设置好仿真模型参数后进行仿真模拟,对仿真结果进行分析,观察马达是否能按预先设定转速进行运转,进而对马达进出口油腔压力、马达扭矩和转速等特性进行确定,验证该液压传动系统设计是否合理。
According to the working characteristics of the new buckling table of the buckling machine, the traditional hydraulic system of the rotary table is designed, and the working parameters of the hydraulic drive system are determined by the hydraulic principle. The relevant simulation model is built in AMESim, the simulation model parameters are set up, the simulation is simulated, the simulation results are analyzed, and the motor can be operated according to the preset speed, and then the oil inlet pressure, motor torque and speed of the motor inlet and outlet, etc. The characteristics are determined to verify that the hydraulic drive system design is reasonable.
According to the working characteristics of the new buckling table of the buckling machine, the traditional hydraulic system of the rotary table is designed, and the working parameters of the hydraulic drive system are determined by the hydraulic principle. The relevant simulation model is built in AMESim, the simulation model parameters are set up, the simulation is simulated, the simulation results are analyzed, and the motor can be operated according to the preset speed, and then the oil inlet pressure, motor torque and speed of the motor inlet and outlet, etc. The characteristics are determined to verify that the hydraulic drive system design is reasonable.
引文
[1]李瑞.汾酒用曲块制作机理及其关键技术研究[D].太原:太原理工大学,2011.
[2]熊翔,刘安然.大曲机械压曲生产工艺条件研究[J].酿酒科技,2010,(10):61-62.
[3]付捷,王瑛.我国酒厂制曲压块机的现状与发展方向[J].包装与食品机械,2005,(5):29-30.
[4]王志军.液压技术的发展现状与趋势[J].电子制作,2016,(20):85.
[5]彭天好,朱刘英,胡佑兰.基于AMESim的泵控马达变转速系统仿真分析[J].液压与气动,2010,(9):33-35.
[6]王雪芝,贺尚红.泵控马达调速液压系统的建模与仿真[J].长沙理工大学学报(自然科学版),2012,9(01):73-77.[2017-09-20]
[7]朱刘英.基于AMESim变转速泵控马达系统调速特性分析[D].淮南:安徽理工大学,2010.
[8]卫进,秦禹,邵良锋.凸轮分割式旋转踩曲机传动系统的研究与仿真[J].食品与机械,2015,(3):78-81.
[9]王瑛,付捷,罗钢.酒厂转盘式多工位曲块压制机的设计[J].包装与食品机械,2016,(6):29-31.
[10]安宁.酿酒专用曲块连续生产测控系统的研究[D].太原:太原理工大学,2012.
[11]张洪霞.酿酒专用曲块连续生产测控系统的研究[D].太原:太原理工大学,2010.
[12]梁全.液压系统AMESim计算机仿真指南[M].北京:机械工程出版社,2014.
[13]付永领,祁晓野.LMS Imagine.Lab AMESim系统建模和仿真参考手册[M].北京:北京航空航天大学出版社,2011.
[2]熊翔,刘安然.大曲机械压曲生产工艺条件研究[J].酿酒科技,2010,(10):61-62.
[3]付捷,王瑛.我国酒厂制曲压块机的现状与发展方向[J].包装与食品机械,2005,(5):29-30.
[4]王志军.液压技术的发展现状与趋势[J].电子制作,2016,(20):85.
[5]彭天好,朱刘英,胡佑兰.基于AMESim的泵控马达变转速系统仿真分析[J].液压与气动,2010,(9):33-35.
[6]王雪芝,贺尚红.泵控马达调速液压系统的建模与仿真[J].长沙理工大学学报(自然科学版),2012,9(01):73-77.[2017-09-20]
[7]朱刘英.基于AMESim变转速泵控马达系统调速特性分析[D].淮南:安徽理工大学,2010.
[8]卫进,秦禹,邵良锋.凸轮分割式旋转踩曲机传动系统的研究与仿真[J].食品与机械,2015,(3):78-81.
[9]王瑛,付捷,罗钢.酒厂转盘式多工位曲块压制机的设计[J].包装与食品机械,2016,(6):29-31.
[10]安宁.酿酒专用曲块连续生产测控系统的研究[D].太原:太原理工大学,2012.
[11]张洪霞.酿酒专用曲块连续生产测控系统的研究[D].太原:太原理工大学,2010.
[12]梁全.液压系统AMESim计算机仿真指南[M].北京:机械工程出版社,2014.
[13]付永领,祁晓野.LMS Imagine.Lab AMESim系统建模和仿真参考手册[M].北京:北京航空航天大学出版社,2011.