新型三维织机织边机构携纱器的结构设计
|
摘要
携纱器是三维织机织边机构中的核心部件,起到存储纱线、控制纱线张紧力的作用。设计出一种具有双涡卷弹簧、双线圈储纱装置的携纱器,配合梭形结构,在保证体积小巧的同时,极大地增加了携纱器的纱线张紧力与储纱量。携纱器的纱线穿梭路径采用上下环形绕线与中部穿梭固定环相结合的穿线模式,可以减少纱线与纱线筒之间的摩擦力。同时,下路固定环的加入,有效地减少了纱线的自缠绕问题。
The yarn carrier is the key core components in three-dimensional loom selvage institutions playing the role of storing yarn and controlling yarn tension.A kind of yarn carrier is designed with double turbination spring,double coil yarn storage devices and shuttle-shaped profiles.It has smart volume,and significantly increased the yarn tension and yarn storage.With a designed threading model with the combination of up-down ring winding and middle winding fixed ring,it can reduce the friction between the yarn and the yarn cone.At the same time,the addition of under fixed ring road can effectively reduce the winding of the yarn.
The yarn carrier is the key core components in three-dimensional loom selvage institutions playing the role of storing yarn and controlling yarn tension.A kind of yarn carrier is designed with double turbination spring,double coil yarn storage devices and shuttle-shaped profiles.It has smart volume,and significantly increased the yarn tension and yarn storage.With a designed threading model with the combination of up-down ring winding and middle winding fixed ring,it can reduce the friction between the yarn and the yarn cone.At the same time,the addition of under fixed ring road can effectively reduce the winding of the yarn.
引文
[1]CHEN L,TAO X M,CHOY C L.On the microstructure of three-dimensional braided preforms[J].Composites Science and Technology,1999,59(3):391-404.
[2]李宗迎,贺辛亥,杨超群,等.新型三维编织机携纱器结构设计[J].上海纺织科技,2015(5):69-70,73.
[3]李宗迎.一种新型三维编织携纱器的研究与设计[D].西安:西安工程大学,2015.
[4]郑占阳,贺辛亥,张申申,等.三维编织自动增减纱携纱器的研究[J].棉纺织技术,2016(1):18-21.
[5]董红坤,贺辛亥,郑占阳,等.用于三维编织可控增减纱的携纱器设计[J].纺织学报,2016(4):143-147.
[6]赵展,HASABLKBAL M,李炜.编织机及编织工艺的发展[J].玻璃钢/复合料,2014(10):90-95,57.
[7]刘健,黄故.三维多剑杆织机织边方法的研究[J].天津工业大学学报,2004(6):30-31.
[8]GOYAL D,WHITCOMB J D.Effect of fiber properties on plastic behavior of biaxial braided composites[J].Composites Science and Technology,2008,68(3-4):969-977.
[9]钱永明,闫红霞,闫江,等.三维织机电子开口系统的研制[J].纺织学报,2014(12):115-120.
[10]梅叶峰,李毓陵.刚性剑杆引入连续纬纱机构的研制[J].国际纺织导报,2007(12):39-41.
[11]赵梅,王益轩,路超,等.三维正交织机双向开口机构的设计[J].产业用纺织品,2015(2):29-34.
[2]李宗迎,贺辛亥,杨超群,等.新型三维编织机携纱器结构设计[J].上海纺织科技,2015(5):69-70,73.
[3]李宗迎.一种新型三维编织携纱器的研究与设计[D].西安:西安工程大学,2015.
[4]郑占阳,贺辛亥,张申申,等.三维编织自动增减纱携纱器的研究[J].棉纺织技术,2016(1):18-21.
[5]董红坤,贺辛亥,郑占阳,等.用于三维编织可控增减纱的携纱器设计[J].纺织学报,2016(4):143-147.
[6]赵展,HASABLKBAL M,李炜.编织机及编织工艺的发展[J].玻璃钢/复合料,2014(10):90-95,57.
[7]刘健,黄故.三维多剑杆织机织边方法的研究[J].天津工业大学学报,2004(6):30-31.
[8]GOYAL D,WHITCOMB J D.Effect of fiber properties on plastic behavior of biaxial braided composites[J].Composites Science and Technology,2008,68(3-4):969-977.
[9]钱永明,闫红霞,闫江,等.三维织机电子开口系统的研制[J].纺织学报,2014(12):115-120.
[10]梅叶峰,李毓陵.刚性剑杆引入连续纬纱机构的研制[J].国际纺织导报,2007(12):39-41.
[11]赵梅,王益轩,路超,等.三维正交织机双向开口机构的设计[J].产业用纺织品,2015(2):29-34.