有优先权三不同部件温贮备可修系统可靠性分析
|
摘要
针对由三个不同部件,一个完全可靠的开关和一个修理设备组成的温贮备可修系统,建立了部件的工作寿命,贮备寿命,工作故障后的修理时间和贮备故障后的修理时间均服从不同参数的指数分布的数学模型,利用Markov型可修系统的研究方法,并采用MATLAB软件给出了该系统的首次故障前的平均时间、可用度和故障频率等可靠性指标的表达式.
A reliability analysis of three different components warm standby repairable systems with a completely reliable switch and a repair equipment sets up mathematic model that service life of components,shelf-life repair time after the breakdown and standby fault were all subjected to different types of exponential distribution.With the help of the research method which is based on Markov repairable system and MATLAB software,the expressions of the average time before the first failure,availability,fault frequency and other reliability indicators are obtained.
A reliability analysis of three different components warm standby repairable systems with a completely reliable switch and a repair equipment sets up mathematic model that service life of components,shelf-life repair time after the breakdown and standby fault were all subjected to different types of exponential distribution.With the help of the research method which is based on Markov repairable system and MATLAB software,the expressions of the average time before the first failure,availability,fault frequency and other reliability indicators are obtained.
引文
[1]曹晋华,程侃.可靠性数学引论[M].2版(修订本).北京:高等教育出版社,2006:240-242.
[2]胡兆红,陈希镇.两不同型部件温贮备可修系统的可靠性分析[J].温州大学学报,2009,30(4):44-48.
[3]吴青太.2个不同部件组成的开关寿命连续型温贮备可修系统的可靠性分析[J].南京理工大学学报,2004,28(6):673-678.
[4]刘海涛,孟宪云,李芳,付钦慧,张建龙.两个不同型部件温贮备系统的几何过程模型[J].系统过程,2010,28(9):103-107.
[5]段红星,张民悦,包林涛,朱军强.有优先权两部件离散时间温贮备可修系统[J].兰州理工大学学报,2009,35(6):144-146.
[6]白红信,赵国会.开关完全可靠三部件温贮备系统可靠性分析[J].保定学院学报,2008,21(2):7-8.
[7]谢秀梅,张民悦.开关寿命连续型3部件温贮备系统可靠性分析[J].甘肃科学学报,2009,21(3):43-45.
[8]张民悦,包林涛,段红星.有优先权的两个不同型部件冷贮备可修系统[J].兰州理工大学学报,2007,33(2):152-155.
[9]包林涛,张民悦,段红星,等.有优先权两部件开关不完全可靠冷贮备可修系统(Ⅱ)[J].甘肃科学学报,2007,19(1):60-62.
[10]李才良,蒲冰远,唐应辉,等.两不同部件冷贮备系统的可靠性分析[J].电子科技大学学报,2003,32(4):447-450.
[11]谢秀梅,张民悦,姚滔.有优先权3部件冷贮备可修系统可靠性分析[J].甘肃科学学报,2010,22(1):190-121.
[12]梁丽丹,张民悦.有优先权4部件冷贮备Markov可修系统可靠性分析[J].四川理工学院学报,2011,24(3):292-295.
[13]LAM Y.Anote on the optimal replacement problem[J].Ad-vances in Applied Probability,1999,20:479-482.
[14]LAM Y,ZHANG Y L,GEOM A.Etric-process maintenancemodel for a deteriorating system under a randomenvironment[J].IEEE Transactions on Reliability,2008,52(1):83-89.
[2]胡兆红,陈希镇.两不同型部件温贮备可修系统的可靠性分析[J].温州大学学报,2009,30(4):44-48.
[3]吴青太.2个不同部件组成的开关寿命连续型温贮备可修系统的可靠性分析[J].南京理工大学学报,2004,28(6):673-678.
[4]刘海涛,孟宪云,李芳,付钦慧,张建龙.两个不同型部件温贮备系统的几何过程模型[J].系统过程,2010,28(9):103-107.
[5]段红星,张民悦,包林涛,朱军强.有优先权两部件离散时间温贮备可修系统[J].兰州理工大学学报,2009,35(6):144-146.
[6]白红信,赵国会.开关完全可靠三部件温贮备系统可靠性分析[J].保定学院学报,2008,21(2):7-8.
[7]谢秀梅,张民悦.开关寿命连续型3部件温贮备系统可靠性分析[J].甘肃科学学报,2009,21(3):43-45.
[8]张民悦,包林涛,段红星.有优先权的两个不同型部件冷贮备可修系统[J].兰州理工大学学报,2007,33(2):152-155.
[9]包林涛,张民悦,段红星,等.有优先权两部件开关不完全可靠冷贮备可修系统(Ⅱ)[J].甘肃科学学报,2007,19(1):60-62.
[10]李才良,蒲冰远,唐应辉,等.两不同部件冷贮备系统的可靠性分析[J].电子科技大学学报,2003,32(4):447-450.
[11]谢秀梅,张民悦,姚滔.有优先权3部件冷贮备可修系统可靠性分析[J].甘肃科学学报,2010,22(1):190-121.
[12]梁丽丹,张民悦.有优先权4部件冷贮备Markov可修系统可靠性分析[J].四川理工学院学报,2011,24(3):292-295.
[13]LAM Y.Anote on the optimal replacement problem[J].Ad-vances in Applied Probability,1999,20:479-482.
[14]LAM Y,ZHANG Y L,GEOM A.Etric-process maintenancemodel for a deteriorating system under a randomenvironment[J].IEEE Transactions on Reliability,2008,52(1):83-89.